Performance of Parallel, Interdigitated, and Serpentine Flow Field PEM Fuel Cells with Straight or Wavelike Channels
Publication: Journal of Energy Engineering
Volume 146, Issue 5
Abstract
This work used a three-dimensional, two-phase, and nonisothermal model to compare performances of proton exchange membrane (PEM) fuel cells with a parallel, interdigitated, or serpentine flow field when wavelike gas channels (GCs) are or not employed, to determine which flow field needs wavelike GCs more than the others. The comparisons showed that the performance enhancement is the most pronounced for the parallel flow field, whereas the enhancement was significantly reduced for the serpentine and interdigitated flow fields when wavelike GCs are adopted. For the parallel flow field, oxygen transport into the gas diffusion layer (GDL) and liquid water removal from the cathode porous electrode were enhanced remarkably by wavelike GCs. As a result, more oxygen was transported into the catalyst layer (CL) to participate in electrochemical reactions, leading to better cell performance. However, subrib convection in the interdigitated and serpentine flow fields weakened the role of wavelike GCs, so that the performance was not improved greatly for the two flow fields. The influence of the amplitude to wavelength ratio, aspect ratio of wavelike GCs, and cathode flow rate in the parallel flow field were investigated. The results show that the optimal amplitude to wavelength ratio is 0.6, which yields a 13.44% increase in the power density compared with straight GCs. The wavelike GCs had greater enhancement when small channel aspect ratios were employed or when the cell operated at larger cathode flow rates. The simulations provide useful guidance for practical PEM fuel cell flow field designs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was partially supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China (No. 51821004), the National Natural Science Foundation of China (No. 51676067), and the Excellent Youth Foundation of Hunan Province Scientific Committee (No. 2018JJ1011).
References
Berning, T., D. M. Lu, and N. Djilali. 2002. “Three-dimensional computational analysis of transport phenomena in a PEM fuel cell.” J. Power Sources 106 (1–2): 284–294. https://doi.org/10.1016/S0378-7753(01)01057-6.
Byun, S. J., Z. H. Wang, J. Son, D. K. Kwak, and Y. C. Kwon. 2018. “Experimental study on improvement of performance by wave form cathode channels in a PEM fuel cell.” Energies 11 (2): 319. https://doi.org/10.3390/en11020319.
Fuller, T. F., and J. Newman. 1993. “Water and thermal management in solid-polymer-electrolyte fuel cells.” J. Electrochem. Soc. 140 (5): 1218–1225. https://doi.org/10.1149/1.2220960.
Ge, S. H., and B. L. Yi. 2003. “A mathematical model for PEMFC in different flow modes.” J. Power Sources 124 (1): 1–11. https://doi.org/10.1016/S0378-7753(03)00584-6.
Gu, W. B., C. Y. Wang, and B. Y. Liaw. 1997. “Numerical modeling of coupled electrochemical and transport processes in lead-acid batteries.” J. Electrochem. Soc. 144 (6): 2053–2061. https://doi.org/10.1149/1.1837741.
Gurau, V., H. Liu, and S. Kakac. 1998. “Two-dimensional model for proton exchange membrane fuel cells.” AlChE J. 44 (11): 2410–2422. https://doi.org/10.1002/aic.690441109.
Jia, Y., B. Sunden, and G. Xie. 2019. “A parametric comparison of temperature uniformity and energy performance of a PEMFC having serpentine wavy channels.” Int. J. Energy Res. 43 (7): 2722–2736. https://doi.org/10.1002/er.4327.
Kuo, J. K., and C. K. Chen. 2006. “Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle.” J. Power Sources 162 (2): 1122–1129. https://doi.org/10.1016/j.jpowsour.2006.07.053.
Kuo, J. K., and C. K. Chen. 2007. “The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation.” Int. J. Heat Mass Transfer 50 (21–22): 4166–4179. https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.039.
Kuo, J. K., T. H. Yen, and C. K. Chen. 2008b. “Three-dimensional numerical analysis of PEM fuel cells with straight and wave-like gas flow fields channels.” J. Power Sources 177 (1): 96–103. https://doi.org/10.1016/j.jpowsour.2007.11.065.
Kuo, J. K., T. S. Yen, and C. K. Chen. 2008a. “Improvement of performance of gas flow channel in PEM fuel cells.” Energy Convers. Manage. 49 (10): 2776–2787. https://doi.org/10.1016/j.enconman.2008.03.024.
Liu, H. C., W. M. Yan, and X. D. Wang. 2007. “Effects of flow channel area ratio on local transport characteristics and cell performance of 3D PEMFCs.” J. Electrochem. Soc. 154 (12): B1338–B1348. https://doi.org/10.1149/1.2789349.
Meng, H. 2007. “A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations.” J. Power Sources 168 (1): 218–228. https://doi.org/10.1016/j.jpowsour.2007.03.012.
Nguyen, T. V. 1996. “A gas distributor design for proton-exchange-membrane fuel cells.” J. Electrochem. Soc. 143 (5): L103–L105. https://doi.org/10.1149/1.1836666.
Rostami, J., A. Abbassi, and M. Saffar-Avva. 2015. “Optimization of conjugate heat transfer in wavy walls microchannels.” Appl. Therm. Eng. 82 (May): 318–328. https://doi.org/10.1016/j.applthermaleng.2015.02.069.
Shen, J., Z. K. Tu, and S. H. Chan. 2019. “Enhancement of mass transfer in a proton exchange membrane fuel cell with blockage in the flow channel.” Appl. Therm. Eng. 149 (Feb): 1408–1418. https://doi.org/10.1016/j.applthermaleng.2018.12.138.
Shen, J., Z. K. Tu, and S. H. Chan. 2020a. “Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field.” Appl. Therm. Eng. 164 (Jan): 114464. https://doi.org/10.1016/j.applthermaleng.2019.114464.
Shen, J., L. Xu, H. W. Chang, Z. K. Tu, and S. H. Chan. 2020b. “Partial flooding and its effect on the performance of a proton exchange membrane fuel cell.” Energy Convers. Manage. 207 (Mar): 112537. https://doi.org/10.1016/j.enconman.2020.112537.
Springer, T. E., M. S. Wilson, and S. Gottesfeld. 1993. “Modeling and experimental diagnostics in polymer electrolyte fuel cells.” J. Electrochem. Soc. 140 (12): 3513–3526. https://doi.org/10.1149/1.2221120.
Tao, W. Q., C. H. Min, Y. L. He, B. H. Yin, and W. Jiang. 2006. “Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation: Part I. Current status of modeling research and model development.” J. Power Sources 160: 359–373. http://10.1016/j.jpowsour.2006.01.080.
Um, S., C. Y. Wang, and K. S. Chen. 2000. “Computational fluid dynamics modeling of proton exchange membrane fuel cells.” J. Electrochem. Soc. 147 (12): 4485–4493. https://doi.org/10.1149/1.1394090.
Wang, X. D., Y. Y. Duan, and W. M. Yan. 2007a. “Novel serpentine-baffle flow field design for proton exchange membrane fuel cells.” J. Power Sources 173 (1): 210–221. https://doi.org/10.1016/j.jpowsour.2007.08.037.
Wang, X. D., Y. Y. Duan, and W. M. Yan. 2007b. “Numerical study of cell performance and local transport phenomena in PEM fuel cells with various flow channel area ratios.” J. Power Sources 172 (1): 265–277. https://doi.org/10.1016/j.jpowsour.2007.07.026.
Wang, X. D., Y. Y. Duan, W. M. Yan, D. J. Lee, A. Su, and P. H. Chi. 2009a. “Channel aspect ratio effect for serpentine proton exchange membrane fuel cell: Role of sub-rib convection.” J. Power Sources 193 (2): 684–690. https://doi.org/10.1016/j.jpowsour.2009.04.019.
Wang, X. D., Y. Y. Duan, W. M. Yan, and X. F. Peng. 2008a. “Effects of flow channel geometry on cell performance for PEM fuel cells with parallel and interdigitated flow fields.” Electrochim. Acta 53 (16): 5334–5343. https://doi.org/10.1016/j.electacta.2008.02.095.
Wang, X. D., Y. Y. Duan, W. M. Yan, and X. F. Peng. 2008b. “Local transport phenomena and cell performance of PEM fuel cells with various serpentine flow field designs.” J. Power Sources 175 (1): 397–407. https://doi.org/10.1016/j.jpowsour.2007.09.009.
Wang, X. D., X. X. Zhang, W. M. Yan, D. J. Lee, and A. Su. 2009b. “Determination of the optimal active area for proton exchange membrane fuel cells with parallel, interdigitated or serpentine designs.” Int. J. Hydrogen Energy 34 (9): 3823–3832. https://doi.org/10.1016/j.ijhydene.2008.12.049.
Yan, W. M., H. Y. Li, P. C. Chiu, and X. D. Wang. 2008. “Effects of serpentine flow field with outlet channel contraction on cell performance of proton exchange membrane fuel cells.” J. Power Sources 178 (1): 174–180. https://doi.org/10.1016/j.jpowsour.2007.12.017.
Yan, W. M., C. H. Yang, C. Y. Soong, F. Chen, and S. C. Mei. 2006. “Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells.” J. Power Sources 160 (1): 284–292. https://doi.org/10.1016/j.jpowsour.2006.01.031.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 146 • Issue 5 • October 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 27, 2020
Accepted: Jun 11, 2020
Published online: Aug 11, 2020
Published in print: Oct 1, 2020
Discussion open until: Jan 11, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.