Heat Transfer Enhancement in a Cross-Flow Heat Exchanger with Modified Air Angles of Attack
Publication: Journal of Energy Engineering
Volume 142, Issue 3
Abstract
The technique of heat transfer enhancement of a nonfin cross-flow heat exchanger by a modified air angle of attack is investigated experimentally in this study. Six air angles of attack (i.e., 0°, 30°, 60°, 90°, 120°, and 150°) with the same perimeter are examined to determine their relationships to the overall heat transfer coefficient and the pressure drop; the heat exchanger performance are also tested. In the experiment, hot water (at a temperature of 75°C) with a constant flow rate and air at ambient conditions with various velocities (ranging from 2 to ) flows through the heat exchanger. The results indicate that the modified air angle of attack technique can enhance the overall heat transfer coefficient; however, the pressure drop is also increased.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the School of Energy, Environment, and Materials, King Mongkut’s University of Technology Thonburi, for its financial support of this research.
References
Buyruk, E., Johnson, M. W., and Owen, I. (1998). “Numerical and experimental study of flow and heat transfer around a tube in cross-flow at low Reynolds number.” Int. J. Heat Fluid Flow, 19(3), 223–232.
Cabezas-Gómez, L., Navarro, H. A., Sáiz-Jabardo, J. M., Hanriot, S. M., and Maia, C. B. (2012). “Analysis of a new cross flow heat exchanger flow arrangement: Extension to several rows.” Int. J. Therm. Sci., 55, 122–132.
Cengel, Y. A. (2006). Heat and mass transfer a practical approach, 3rd Ed., McGraw-Hill, Singapore.
Hasan, A. (2005). “Thermal-hydraulic performance of oval tubes in a cross-flow of air.” Heat Mass Transfer, 41(8), 724–733.
Holman, J. P. (2010). Heat transfer, 10th Ed., McGraw-Hill, New York.
Horvat, A., Leskovar, M., and Mavko, B. (2006). “Comparison of heat transfer conditions in tube bundle cross-flow for different tube shapes.” Int. J. Heat Mass Transfer, 49(5–6), 1027–1038.
Ibrahim, T. A., and Gomaa, A. (2009). “Thermal performance criteria of elliptic tube bundle in cross flow.” Int. J. Therm. Sci., 48(11), 2148–2158.
Khan, W. A., Culham, J. R., and Yovanovich, M. M. (2006). “Convection heat transfer from tube banks in cross flow: Analytical approach.” Int. J. Heat Mass Transfer, 49(25–26), 4831–4838.
Kim, T. (2013). “Effect of longitudinal pitch on convective heat transfer in cross flow over inline tube banks.” Ann. Nucl. Energy, 57, 209–215.
Lavasani, A. M., Bayat, H., and Maarefdoost, T. (2014). “Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow.” Appl. Therm. Eng., 65(1–2), 85–93.
Mandhani, V. K., Chhabra, R. P., and Eswaran, V. (2002). “Forced convection heat transfer in tube banks in cross flow.” Chem. Eng. Sci., 57(3), 379–391.
Nouri-Borujerdi, A., and Lavasani, A. M. (2007). “Experimental study of forced convection heat transfer from a cam shaped tube in cross flows.” Int. J. Heat Mass Transfer, 50(13–14), 2605–2611.
Wheeler, A. J., and Ganji, A. R. (2004). Introduction to engineering experimentation, 2nd Ed., Pearson Prentice Hall, New Jersey.
Wilson, A. S., and Bassiouny, B. K. (2000). “Modeling of heat transfer for flow across tube banks.” Chem. Eng. Process., 39(1), 1–14.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 22, 2015
Accepted: Aug 6, 2015
Published online: Sep 23, 2015
Discussion open until: Feb 23, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.