Effect of Paddle-Wheel Pulsating Velocity on the Hydrodynamic Performance of High-Rate Algal Ponds
Publication: Journal of Energy Engineering
Volume 141, Issue 4
Abstract
High-rate algae ponds (HRAPs) are widely used in increasing biofuel production because of their effective design in terms of cost and power consumption. Using modeling and simulation techniques is an economical approach for improving the design of raceways. Previous modeling studies reported the use of a flat velocity profile, thus failing to depict the real phenomena involved. However, in practice, the rotating paddle wheel in HRAPs produces a pulsating velocity that is necessary for culture growth. In this study, the hydrodynamic characteristics of algal ponds were investigated using a coupling algorithm to map the effects of a two-dimensional paddle wheel on a three-dimensional raceway model. HRAPs with and without paddle wheels were compared in terms of hydrodynamic mixing, dead zones, and power consumption. The results revealed that compared with a flat velocity at the inlet, the pulsating velocity of a paddle wheel produced a large dead zone volume with reduced power consumption, shear stress, and turbulence. A few pond design modifications were tested with this realistic situation and an additional recirculation zone was found near the paddle wheel. This zone needs to be addressed in future pond designs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Research Foundation (NRF) of Korea grant funded by the Korean government (MEST) (No. 2012R1A2A2A01046099), and a grant from the Priority Research Centers Program through the NRF, funded by MEST (No. 2012-0005856).
References
Bladé, E., Gómez-Valentín, M., Dolz, J., Aragón-Hernández, J. L., Corestein, G., and Sánchez-Juny, M. (2012). “Integration of 1D and 2D finite volume schemes for computations of water flow in natural channels.” Adv. Water Resour., 42, 17–29.
Borowitzka, M. A. (2005). “Culturing microalgae in outdoor ponds.” Algae culturing techniques, R. A. Andresen, ed., Elsevier Academic Press, Burlington, MA, 205–218.
Brune, D. E., Schwartz, G., Eversole, A. G., Collier, J. A., and Schwedler, T. E. (2003). “Intensification of pond aquaculture and high rate photosynthetic systems.” Aquacult. Eng., 28(1–2), 65–86.
Chen, C. J., and Jaw, S. Y. (1997). Fundamentals of turbulence modelling, Taylor & Francis, New York.
Chen, Y., Wang, Z., Liu, Z., and Zhu, D. (2012). “1D–2D coupled numerical model for shallow-water flows.” J. Hydraul. Eng., 122–132.
Chiaramonti, D., et al. (2013). “Review of energy balance in raceway ponds for microalgae cultivation: Re-thinking a traditional system is possible.” Appl. Energy, 102, 101–111.
Chisti, Y. (2007). “Biodiesel from microalgae.” Biotechnol. Adv., 25(3), 294–306.
COMSOL-Multiphysics [Computer software]. Burlington, MA, Comsol.
Contreras, A, Garcia, F., Molina, E., and Merchuk, J. C. (1998). “Interaction between CO2-mass transfer, light availability, and hydrodynamic stress in the growth of Phaeodactylum tricornutum in a concentric tube airlift photobioreactor.” Biotechnol. Bioeng., 60(3), 317–325.
Dempster, T. A., and Sommerfeld, M. R. (1998). “Effects of environmental conditions on growth and lipid accumulation in Nitzschia communis (Bacillariophyceae).” J. Phycol., 34(4), 712–721.
Dodd, J. C. (1986). “Elements of pond design and construction.” Handbook of microalgal mass culture, A. Richmond, ed., CRC Press, Boca Raton, FL, 265–283.
Finaud-Guyot, P., Delenne, C., Guinot, V., and Llovel, C. (2011). “1D–2D coupling for river flow modeling.” C.R. Mec., 339(4), 226–234.
Hadiyanto, H., Elmore, S., Van Gerven, T., and Stankiewicz, A. (2013). “Hydrodynamic evaluations in high rate algae pond (HRAP) design.” Chem. Eng. J., 217, 231–239.
Hafez, K. A., Elsamni, O. A., and Zakaria, K. Y. (2011). “Numerical investigation of the fully developed turbulent flow over a moving wavy wall using k–ε turbulence model.” Alexandria Eng. J., 50(2), 145–162.
He, Z., Wu, W., and Wang, S. S. Y. (2008). “Coupled finite–volume model for 2D surface and 3D subsurface flows.” J. Hydrol. Eng., 835–845.
Kawase, Y., and Moo-Young, M. (1990). “Mathematical models for design of bioreactors: Applications of Kolmogoroff’s theory of isotropic turbulence.” Chem. Eng. J., 43(1), B19–B41.
Liffman, K., Paterson, D. A., Liovic, P., and Bandopadhayay, P. (2013). “Comparing the energy efficiency of different high rate algal raceway pond designs using computational fluid dynamics.” Chem. Eng. Res. Des., 91(2), 221–226.
Mangelson, K. A., and Watters, G. Z. (1972). “Treatment efficiency of waste stabilization ponds.” J. Sanit. Eng. Div., 98(2), 407–425.
Mendoza, J. L., et al. (2013). “Fluid-dynamic characterization of real-scale raceway reactors for microalgae production.” Biomass Bioenergy, 54, 267–275.
Miley, G. H., Hawkins, G., and Englander, J. (2006). “Development of a coupled 2D-3D fuel cell model for flow field analysis.” Proc., COMSOL Users Conf., COMSOL, Boston.
Oswald, W. J. (1998). “Micro-algae and waste-water treatment.” Microalgal biotechnology, M. A. Borowitzka and L. J. Borowitzka, eds., Cambridge University Press, Cambridge, U.K., 305–328.
Pruvost, J., Cornet, J. F., and Legrand, J. (2008). “Hydrodynamics influence on light conversion in photobioreactors: An energetically consistent analysis.” Chem. Eng. Sci., 63(14), 3679–3694.
Radmann, E. M., Reinehr, C. O., and Costa, J. A. V. (2007). “Optimization of the repeated batch cultivation of microalga Spirulina platensis in open raceway ponds.” Aquaculture, 265(1–4), 118–126.
Richmond, A., and Grobbelaar, J. U. (1986). “Factors affecting the output rate of Spirulina platensis with reference to mass cultivation.” Biomass, 10(4), 253–264.
Rodi, W. (1993). Turbulence models and their application in hydraulics—A state of the art review, 3rd Ed., International Association for Hydro-Environment Engineering and Research (IAHR) Monograph, Balkema, Rotterdam, The Netherlands.
Sheehan, J., Dunahay, T., Benemann, J., and Roessler, P. (1998). “A look back at the U.S. Department of Energy’s aquatic species program—Biodiesel from algae.”, National Renewable Energy Laboratory, Golden, CO.
Shimamatsu, H. (1987). “A pond for edible Spirulina production and its hydraulic studies.” Hydrobiologia, 151–152(1), 83–89.
Thomas, W. H., and Gibson, C. H. (1990). “Effects of small-scale turbulence on microalgae,” J. Appl. Phycol., 2(1), 71–77.
Weissman, J. C., Goebel, R. P., and Benemann, J. R. (1988). “Photobioreactor design: Mixing, carbon utilization, and oxygen accumulation.” Biotechnol. Bioeng., 31(4), 336–344.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 141 • Issue 4 • December 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 4, 2014
Accepted: Jun 20, 2014
Published online: Aug 20, 2014
Discussion open until: Jan 20, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.