Simultaneous Assessment of Damage and Unknown Input for Large Structural Systems by UKF-UI
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Engineering Mechanics
Volume 147, Issue 10
Abstract
Much progress has been made in the assessment of structural damage and unknown input (UI) using incomplete and noisy measurement signals. The unscented Kalman filter (UKF) has proved to be a sophisticated approach to this task. A novel method using UKF with unknown input (UKF-UI) for recursive identification of a state-input system has been proposed by the authors. However, the purpose of this study was to propose the new UKF-UI framework and validate it with some simple structures. Although very limited research has been conducted on the UKF for health assessment of large structural systems, including two-dimensional (2D) and three-dimensional (3D) frame structures, it is based on a two-stage approach and requires full measurement of all acceleration, velocity, and displacement responses in the substructure containing the UI. Some implementations either have limitations in real-time identification or need assumptions on the time evolution of UI. One example is the random walk hypothesis, which heavily depends on the tuning of noise parameters. The application of UKF to large structural systems is still a challenging problem. This observation has prompted the authors to investigate the UKF-UI framework for identification of large structural systems. Here, it is extended to the assessment of damage and UI by the UKF-UI method for 2D and a 3D finite-element (FE) frame models. By the partially measured noise-polluted structural acceleration and displacement responses, the extent and location of damage is assessed at the element level. The unknown external excitations are simultaneously identified with no assumptions about the time evolutions of a one-stage identification process.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study are available from the corresponding author upon reasonable request.
Acknowledgments
This research is supported by the National Key R&D Program of China through Grant No. 2017YFC1500603 and by the National Natural Science Foundation of China (NSFC) through Grant No. 51678509.
References
Al-Hussein, A., and A. Haldar. 2015. “Novel unscented Kalman filter for health assessment of structural systems with unknown input.” J. Eng. Mech. 141 (7): 04015012. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000926.
Al-Hussein, A., and A. Haldar. 2017. “Structural damage prognosis of three-dimensional large structural systems.” Struct. Infrastruct. Eng. 13 (1): 1–13. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000926.
Astroza, R., H. Ebrahimian, Y. Li, and P. Joel. 2017. “Bayesian nonlinear structural FE model and seismic input identification for damage assessment of civil structures.” Mech. Syst. Signal Process. 93 (5): 661–687. https://doi.org/10.1016/j.ymssp.2017.01.040.
Azam, S. E., C. Chatzi, C. Papadimitriou, and A. W. Smyth. 2015a. “Experimental validation of the Kalman-type filters for online and real-time state and input estimation.” J. Vib. Control 23 (15): 2494–2519 https://doi.org/10.1177/1077546315617672.
Azam, S. E., E. Chatzi, and C. Papadimitriou. 2015b. “A dual Kalman filter approach for state estimation via output-only acceleration measurements.” Mech. Syst. Signal Process. 60 (Aug): 866–886. https://doi.org/10.1016/j.ymssp.2015.02.001.
Castiglione, J., R. Astroza, S. E. Azam, and D. Linzell. 2020. “Auto-regressive model based input and parameter estimation for nonlinear finite element models.” Mech. Syst. Signal Process. 143 (Sep): 106779. https://doi.org/10.1016/j.ymssp.2020.106779.
Chen, J. D., and C. H. Loh. 2017. “Two-stage damage detection algorithms of structure using modal parameters identified from recursive subspace identification.” Earthquake Eng. Struct. Dyn. 47 (2): 573–593. https://doi.org/10.1002/eqe.2980.
Dertimanis, V. K., E. Chatzi, S. E. Azam, and C. Papadimitriou. 2019. “Input-state-parameter estimation of structural systems from limited output information.” Mech. Syst. Sig. Process. 126 (8): 711–746. https://doi.org/10.1016/j.ymssp.2019.02.040.
Ding, Y., L. N. Guo, and B. Y. Zhao. 2017. “Parameter identification for nonlinear structures by a constrained Kalman filter with limited input information.” Int. J. Struct. Stab. Dyn. 17 (1): 1750010. https://doi.org/10.1142/S0219455417500109.
Ding, Y., B. Y. Zhao, B. Wu, X. Zhang, and L. Guo. 2015. “Simultaneous identification of structure and external excitation with improved unscented Kalman filter.” Adv. Struct. Eng. 18 (11): 1981–1998. https://doi.org/10.1260/1369-4332.18.11.1981.
Ebrahimian, H., R. Astroza, J. Conte, and C. Papadimitriou. 2018. “Bayesian optimal estimation for output-only nonlinear system and damage identification of civil structures.” Struct. Control Health Monit. 25 (4): e2128. https://doi.org/10.1002/stc.2128.
Erazo, K., and S. Nagarajaiah. 2017. “An offline approach for output-only Bayesian identification of stochastic nonlinear systems using unscented Kalman filtering.” J. Sound Vib. 397 (2): 222–240. https://doi.org/10.1016/j.jsv.2017.03.001.
Erazo, K., and S. Nagarajaiah. 2018. “Bayesian structural identification of a hysteretic negative stiffness earthquake protection system using unscented Kalman filtering.” Struct. Control Health Monit. 25 (9): e2203. https://doi.org/10.1002/stc.2203.
Ghanem, R. G., and M. Shinozuka. 1995. “Structural-system identification. I: Theory.” J. Eng. Mech. 121 (2): 255–264. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:2(255).
Guo, L. N., Y. Ding, Z. Wang, G. S. Xu, and B. Wu. 2018. “A dynamic load estimation method for nonlinear structures with unscented Kalman filter.” Mech. Syst. Sig. Process. 101 (12): 254–273. https://doi.org/10.1016/j.ymssp.2017.07.047.
Hoshiya, M., and E. Saito. 1984. “Structural identification by extended Kalman Filter.” J. Eng. Mech. 110 (12): 1757–1770. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:12(1757).
Hui, Y., S. S. Law, M. Liu, and S. Li. 2019. “Parameter and aerodynamic force identification of single-degree-of-freedom system in wind tunnel test.” J. Eng. Mech. 145 (1): 04018120. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001542.
Julier, S. J., and J. K. Uhlmann. 1997. “New extension of the Kalman filter to nonlinear systems.” In Signal processing, sensor fusion, and target recognition VI. Bellingham, WA: International Society for Optics and Photonics.
Julier, S. J., J. K. Uhlmann, and H. F. Durrant-Whyte. 1995. “A new approach for filtering nonlinear systems.” In Proc., American Control Conf. New York: IEEE.
Lei, Y., F. Chen, and H. Zhou. 2015. “A two-stage and two-step algorithm for the identification of structural damage and unknown excitations: numerical and experimental studies.” Smart Struct. Syst. 15 (1): 57–80.
Lei, Y., and Y. Jiang. 2012. “Structural damage detection technique with limited input and output measurement signals.” J. Vib. Meas. Diagn. 28 (5): 229–243. https://doi.org/10.1016/j.ymssp.2011.07.026.
Lei, Y., C. Liu, and L. J. Liu. 2014. “Identification of multistory shear buildings under unknown earthquake excitation using partial output measurements: Numerical and experimental studies.” Struct. Control Health Monit. 21 (5): 774–783. https://doi.org/10.1002/stc.1600.
Lei, Y., D. D. Xia, K. Erazo, and S. Nagarajaiah. 2019. “A novel unscented Kalman filter for recursive state-input-system identification of nonlinear systems.” Mech. Syst. Sig. Process. 127 (Jul): 120–135. https://doi.org/10.1016/j.ymssp.2019.03.013.
Liu, L. J., Y. Lei, and M. Y. He. 2016a. “A two-stage parametric identification of strong nonlinear structural systems with incomplete response measurements.” Int. J. Struct. Stab. Dyn. 16 (4): 1640022. https://doi.org/10.1142/S0219455416400228.
Liu, L. J., Y. Su, J. Zhu, and Y. Lei. 2016b. “Data fusion based EKF-UI for real-time simultaneous identification of structural systems and unknown external inputs.” Measurement 88 (16): 456–467. https://doi.org/10.1016/j.measurement.2016.02.002.
Loh, C. H., and J. D. Chen. 2017. “Tracking modal parameters from building seismic response data using recursive subspace identification algorithm.” Earthquake Eng. Struct. Dyn. 46 (13): 2163–2183. https://doi.org/10.1002/eqe.2900.
Olivier, A., and A. W. Smyth. 2017. “Review of nonlinear filtering for SHM with an exploration of novel higher-order Kalman filtering algorithms for uncertainty quantification.” J. Eng. Mech. 143 (11): 04017128. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001276.
Omrani, R., R. E. Hudson, and E. Taciroglu. 2013. “Parametric identification of nondegrading hysteresis in a laterally and torsionally coupled building using an unscented Kalman filter.” J. Eng. Mech. 139 (4): 452–468. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000498.
Ou, J., and H. Li. 2010. “Structural health monitoring in mainland China: Review and future trends.” Struct. Health Monit. Int. J. 9 (3): 219–231. https://doi.org/10.1177/1475921710365269.
Song, W. 2018. “Generalized minimum variance unbiased joint input-state estimation and its unscented scheme for dynamic systems with direct feedthrough” Mech. Syst. Sig. Process. 99 (56): 886–920. https://doi.org/10.1016/j.ymssp.2017.06.032.
Wang, Z. C., W. X. Ren, and G. D. Chen. 2012. “A Hilbert transform method for parameter identification of time-varying structures with observer techniques.” Smart Mater. Struct. 21 (10): 105007.
Yang, J. N., S. Lin, H. Huang, and Z. Li. 2010. “An adaptive extended kalman filter for structural damage identification.” Struct. Control Health Monit. 13 (4): 849–867.
Yang, J. N., S. Pan, and H. Huang. 2007a. “An adaptive extended Kalman filter for structural damage identifications. II: Unknown inputs.” Struct. Control Health Monit. 14 (3): 497–521. https://doi.org/10.1002/stc.171.
Yi, T. H., X. J. Yao, C. X. Qu, and H. N. Li. 2019. “Clustering number determination for sparse component analysis during output-only modal identification.” J. Eng. Mech. 145 (1): 04018122. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001557.
Yuen, K. V., and K. Huang. 2018. “Real-time substructural identification by boundary force modeling.” Struct. Control Health Monit. 25 (5): e2151–e2151.
Yuen, K. V., and H. Q. Mu. 2016. “Real-time system identification: An algorithm for simultaneous model class selection and parametric identification.” Comput.-Aided Civ. Infrastruct. Eng. 31 (3): 241. https://doi.org/10.1111/mice.12186.
Zhao, Y., M. Noori, W. A. Altabey, and S. B. Beheshti-Aval. 2017. “Mode shape-based damage identification for a reinforced concrete beam using wavelet coefficient differences and multiresolution analysis.” Struct. Control Health Monit. 25 (1): e2041. https://doi.org/10.1002/stc.2041.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 3, 2020
Accepted: May 5, 2021
Published online: Aug 12, 2021
Published in print: Oct 1, 2021
Discussion open until: Jan 12, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jian Guo, Zejun Liang, Kaijiang Ma, Jiyi Wu, Multirate UKF Damage Identification Based on Computer Vision Monitoring of Ship–Bridge Collisions, Journal of Bridge Engineering, 10.1061/JBENF2.BEENG-6880, 29, 11, (2024).