Generalized Plasticity Model for Sand with Enhanced State Parameters
Publication: Journal of Engineering Mechanics
Volume 144, Issue 12
Abstract
This paper presents a constitutive model for sand based on the framework of generalized plasticity and the concept of critical state soil mechanics. In order to model the nonlinear relationship between the critical void ratio and the pressure level more precisely, an enhanced version of the critical void ratio curve is proposed and included in a pressure and density dependent state parameter. In contrast to previous versions, the constitutive relation for the critical void ratio can be adjusted more accurately to a wider range of pressures. The new state parameter is embedded in the plastic modulus, loading vectors, and plastic flow direction vectors of a generalized plasticity model originally developed by Pastor, Zienkiewicz, and Chan. The simulation of a series of drained and undrained triaxial compression tests were used to validate the performance of the modified model under monotonic loading. The comparison between the results of numerical calculations with experimental data shows that the modified model can simulate the stress-strain characteristics of cohesionless sand in a wide range of initial densities and confining pressures with a single set of constitutive parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the CRSRI Open Research Program (Grant No. CKWV2016376/KY), the Key Laboratory of Failure Mechanism and Safety Control Techniques of Earth-rock Dam of the Ministry of Water Resources (Grant No. YK914019), the National Natural Science Foundation of China (Grant Nos. 51679073 and 51009055), and the Priority Academic Program Development of Jiangsu Higher Education Institution.
References
Bauer, E. 1995. “Constitutive modelling of critical states in hypoplasticity.” In Proc., 5th Int. Symp. on Numerical Models in Geomechanics, NUMOG-V, edited by G. N. Pande and S. Pietruszczak, 15–20. Rotterdam, Netherlands: A.A. Balkema.
Bauer, E. 1996. “Calibration of a comprehensive hypoplastic model for granular materials.” Soils Found. 36 (1): 13–26. https://doi.org/10.3208/sandf.36.13.
Bauer, E., L. Li, and M. Khosravi. 2017. “Modelling grain damage under plane strain compression using a micro-polar continuum.” In Proc., 11th Int. Workshop on Bifurcation and Degradation in Geomaterials Dedicated to Hans Muhlhaus, edited by E. Papamichos, P. Papanastasiou, E. Pasternak, and A. Dyskin. Cham, Switzerland: Springer.
Been, K., and M. G. Jefferies. 1985. “A state parameter for sands.” Géotechnique 35 (2): 99–112. https://doi.org/10.1680/geot.1985.35.2.99.
Borst, R. D. 1991. “Simulation of strain localisation: A reappraisal of the Cosserat continuum.” Eng. Comput. 8 (4): 317–332. https://doi.org/10.1108/eb023842.
Castro, G. 1969. “Liquefaction of sand.” Ph.D. thesis, Division of Engineering and Applied Physics, Harvard Univ.
Dafalias, Y. F., and M. T. Manzari. 2004. “Simple plasticity sand model accounting for fabric change effects.” J. Eng. Mech. 130 (6): 622–634. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(622).
Dafalias, Y. F., A. G. Papadimitriou, and X. S. Li. 2004. “Sand plasticity model accounting for inherent fabric anisotropy.” J. Eng. Mech. 130 (11): 1319–1333. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:11(1319).
Desai, C. S., and R. H. Gallagher. 1984. Mechanics of engineering materials. New York: Wiley.
Gudehus, G. 1996. “A comprehensive constitutive equation for granular materials.” Soils Found. 36 (1): 1–12. https://doi.org/10.3208/sandf.36.1.
Huang, W., and E. Bauer. 2003. “Numerical investigations of shear localization in a micro-polar hypoplastic material.” Int. J. Numer. Anal. Methods Geomech. 27 (4): 325–352. https://doi.org/10.1002/(ISSN)1096-9853.
Ishihara, K., and S. Okada. 1978. “Yielding of overconsolidated sand and liquefaction model under cyclic stresses.” Soils Found. 18 (1): 57–72. https://doi.org/10.3208/sandf1972.18.57.
Kolymbas, D. 1991. “An outline of hypoplasticity.” Arch. Appl. Mech. 61 (13): 143–151. https://doi.org/10.1007/BF00788048.
Li, H. E., Y. J. He, G. Y. Fan, T. C. Li, and M. Pastor. 2011. “Recent developments of generalized plasticity models for saturated and unsaturated soils.” Water Sci. Eng. 4 (3): 329–344. https://doi.org/10.3882/j.issn.1674-2370.2011.03.009.
Li, H. E., Z. Li, H. F. Xu, G. Y. Fan, and Y. J. He. 2016a. “Pastor-Zienkiewicz based constitutive model and determination method of its state parameters.” [In Chinese.] Rock Soil Mech. 6 (37): 1623–1632. https://doi.org/10.16285/j.rsm.2016.06.012.
Li, L., Z. Wang, S. Liu, and E. Bauer. 2016b. “Calibration and performance of two different constitutive models for rockfill materials.” Water Sci. Eng. 9 (3): 227–239. https://doi.org/10.1016/j.wse.2016.11.005.
Li, X. S., and Y. F. Dafalias. 2000. “Dilatancy for cohesionless soils.” Geotechnique 50 (4): 449–460. https://doi.org/10.1680/geot.2000.50.4.449.
Li, X. S., Y. F. Dafalias, and Z. L. Wang. 1999. “State-dependent dilatancy in critical-state constitutive modelling of sand.” Can. Geotech. J. 36 (4): 599–611. https://doi.org/10.1139/t99-029.
Ling, H. I., and S. Yang. 2006. “Unified sand model based on the critical state and generalized plasticity.” J. Eng. Mech. 132 (12): 1380–1391. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:12(1380).
Liu, H., and D. Zou. 2013. “Associated generalized plasticity framework for modeling gravelly soils considering particle breakage.” J. Eng. Mech. 139 (5): 606–615. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000513.
Luo, G., and J. M. Zhang. 2004. “Constitutive model for sand considering the variation of its physical state.” [In Chinese.] J. Hydraul. Eng. 7 (35): 26–31. https://doi.org/10.13243/j.cnki.slxb.2004.07.005.
Manzanal, D., M. J. A. Fernández, and M. Pastor. 2011a. “Generalized plasticity state parameter-based model for saturated and unsaturated soils. Part I: Saturated state.” Int. J. Numer. Anal. Methods Geomech. 35 (12): 1347–1362. https://doi.org/10.1002/nag.v35.12.
Manzanal, D., M. Pastor, and J. A. F. Merodo. 2011b. “Generalized plasticity state parameter-based model for saturated and unsaturated soils. Part II: Unsaturated soil modeling.” Int. J. Numer. Anal. Methods Geomech. 35 (18): 1899–1917. https://doi.org/10.1002/nag.v35.18.
Manzari, M. T., and Y. F. Dafalias. 1997. “A critical state two-surface plasticity model for sands.” Geotechnique 47 (2): 255–272. https://doi.org/10.1680/geot.1997.47.2.255.
Pastor, M., C. Zienkiewicz, and K. H. Leung. 1985. “Simple model for transient soil loading in earthquake analysis. II: Non-associative models for sands.” Int. J. Numer. Anal. Methods Geomech. 9 (5): 477–498. https://doi.org/10.1002/(ISSN)1096-9853.
Pastor, M., O. C. Zienkiewicz, and A. H. C. Chan. 1990. “Generalized plasticity and the modelling of soil behaviour.” Int. J. Numer. Anal. Methods Geomech. 14 (3): 151–190. https://doi.org/10.1002/(ISSN)1096-9853.
Rahman, M., S. C. R. Lo, and Y. F. Dafalias. 2014. “Modelling the static liquefaction of sand with low-plasticity fines.” Geotechnique 64 (11): 881–894. https://doi.org/10.1680/geot.14.P.079.
Richart, F. E., J. R. Hall, and R. D. Woods. 1970. Vibrations of soils and foundations: International series in theoretical and applied mechanics. Englewood Cliffs, NJ: Prentice-Hall.
Roscoe, K. H., A. N. Schofield, and C. P. Wroth. 1958. “On the yielding of soils.” Geotechnique 8 (1): 22–53. https://doi.org/10.1680/geot.1958.8.1.22.
Tejchman, J., and E. Bauer. 1996. “Numerical simulation of shear band formation with a polar hypoplastic constitutive model.” Comput. Geotech. 19 (3): 221–244. https://doi.org/10.1016/0266-352X(96)00004-3.
Verdugo, R., and K. Ishihara. 1996. “The steady state of sandy soils.” Soils Found. 36 (2): 81–91. https://doi.org/10.3208/sandf.36.2_81.
Wang, Z. J., S. S. Chen, and Z. Z. Fu. 2015. “Dilatancy behaviors and generalized plasticity constitutive model of rockfill materials.” [In Chinese.] Rock Soil Mech., 36 (7): 1931–1938. https://doi.org/10.16285/j.rsm.2015.07.013.
Wu, W., and E. Bauer. 1993. “A hypoplastic model for barotropy and pyknotropy of granular soils.” In Proc., Int. Workshop on Modern Approaches to Plasticity, 225–245. Amsterdam, Netherlands: Elsevier.
Xiao, Y., and H. Liu. 2017. “Elastoplastic constitutive model for rockfill materials considering particle breakage.” Int. J. Geomech. 17 (1): 04016041. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000681.
Xiao, Y., H. Liu, Y. Chen, and J. Jiang. 2014. “Bounding surface model for rockfill materials dependent on density and pressure under triaxial stress conditions.” J. Eng. Mech. 140 (4): 04014002. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000702.
Xiao, Y., H. Liu, Y. Chen, J. Jiang, and W. Zhang. 2015. “State-dependent constitutive model for rockfill materials.” Int. J. Geomech. 15 (5): 04014075. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000421.
Xiao, Y., Y. Sun, F. Yin, H. Liu, and J. Xiang. 2017. “Constitutive modeling for transparent granular soils.” Int. J. Geomech. 17 (7): 04016150. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000857.
Yao, Y. P., and Y. N. Yu. 2011. “Extended critical state constitutive model for sand based on unified hardening parameter.” [In Chinese.] Chin. J. Geotech. Eng. 12 (33): 1827–1832.
Yin, Z. Y., P. Y. Hicher, C. Dano, and Y. F. Jin. 2017. “Modeling mechanical behavior of very coarse granular materials.” J. Eng. Mech. 143 (1): C4016006. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001059.
Zienkiewicz, O. C., A. H. C. Chan, M. Pastor, B. A. Schrefler, and T. Shiomi. 1999. Computational geomechanics with special reference to earthquake engineering, 105–110. Chichester, UK: Wiley.
Zienkiewicz, O. C., K. H. Leung, and M. Pastor. 1985. “Simple model for transient soil loading in earthquake analysis. I: Basic model and its application.” Int. J. Numer. Anal. Methods Geomech. 9 (5): 453–476. https://doi.org/10.1002/(ISSN)1096-9853.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Feb 18, 2018
Accepted: Jun 5, 2018
Published online: Sep 18, 2018
Published in print: Dec 1, 2018
Discussion open until: Feb 18, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.