Hysteresis Simulation Using Least-Squares Support Vector Machine
Publication: Journal of Engineering Mechanics
Volume 144, Issue 9
Abstract
Hysteresis is a highly nonlinear phenomenon, which is observed in different branches of sciences. The behavior of the hysteretic systems is usually controlled by some nonmeasurable internal states. It makes hysteresis be a nonunique nonlinearity, and therefore hysteresis identification is a cumbersome task. In this paper, which uses the capability of the least-squares support vector machine (LS-SVM) in static function approximation, a new rate-dependent hysteresis model is proposed. First, the model converts the hysteresis’ nonunique nonlinearity into a one-to-one mapping by means of classical hysteresis operators. Second, the mapping is learned by an LS-SVM. The training algorithm of the model is introduced and how the model can be applied in different situations is discussed. The proposed model is assessed with different hystereses with different properties. The generalization capability of the proposed model is compared with a neural-based hysteresis model. Finally, the application of the proposal is investigated in the feed-forward control of the hysteretic systems with an example. The results show the high accuracy of the proposed model in hysteresis simulation and control even for the experimental data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author would like to thank the Research Affairs and Industrial Relations office of K. N. Toosi University of Technology, Tehran, Iran for partially supporting this study.
References
Aljanaideh, O., M. Al Janaideh, and M. Rakotondrabe. 2015. “Inversion-free feedforward dynamic compensation of hysteresis nonlinearities in piezoelectric micro/nano-positioning actuators.” In IEEE Int. Conf. on Robotics and Automation (ICRA), 2673–2678. Washington, DC: IEEE.
Al Janaideh, M., and P. Krejci. 2013. “Inverse rate-dependent Prandtl-Ishlinskii model for feedforward compensation of hysteresis in a piezomicropositioning actuator.” IEEE/ASME Trans. Mechatron. 18 (5): 1498–1507. https://doi.org/10.1109/TMECH.2012.2205265.
Boser, B. E., I. M. Guyon, and V. N. Vapnik. 1992. “A training algorithm for optimal margin classifiers.” In Proc., 5th Annual ACM Workshop on Computational Learning Theory, 144–152. New York: Association for Computing Machinery.
Brokate, M., and J. Sprekels. 1996. “Hysteresis and phase transitions.” Vol. 121 of Applied mathematical sciences. New York: Springer.
Ewing, J. A. 1885. “Experimental researches in magnetism.” Philos. Trans. R. Soc. London 176: 523–640. https://doi.org/10.1098/rstl.1885.0010.
Farrokh, M., and M. S. Dizaji. 2016. “Adaptive simulation of hysteresis using neuro-Madelung model.” J. Intell. Mater. Syst. Struct. 27 (13): 1713–1724. https://doi.org/10.1177/1045389X15604283.
Farrokh, M., M. S. Dizaji, and A. Joghataie. 2015. “Modeling hysteretic deteriorating behavior using generalized Prandtl neural network.” J. Eng. Mech. 141 (8): 04015024. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000925.
Farrokh, M., and A. Joghataie. 2014. “Adaptive modeling of highly nonlinear hysteresis using Preisach neural networks.” J. Eng. Mech. 140 (4): 06014002. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000700.
Flynn, D. 2004. “Application of the Preisach model in soil-moisture hysteresis.” Ph.D. thesis, Univ. College Cork.
Guyer, R. A., K. R. McCall, and G. N. Boitnott. 1995. “Hysteresis, discrete memory, and nonlinear wave propagation in rock: A new paradigm.” Phys. Rev. Lett. 74 (17): 3491–3494. https://doi.org/10.1103/PhysRevLett.74.3491.
Joghataie, A., and M. S. Dizaji. 2013. “Designing high-precision fast nonlinear dam neuro-modelers and comparison with finite-element analysis.” J. Eng. Mech. 139 (10): 1311–1324. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000572.
Joghataie, A., and M. Farrokh. 2008. “Dynamic analysis of nonlinear frames by Prandtl neural networks.” J. Eng. Mech. 134 (11): 961–969. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:11(961).
Joghataie, A., and M. Farrokh. 2011. “Matrix analysis of nonlinear trusses using Prandtl-2 neural networks.” J. Sound Vib. 330 (20): 4813–4826. https://doi.org/10.1016/j.jsv.2011.04.035.
John, S., G. Alici, and C. Cook. 2010. “Inversion-based feedforward control of polypyrrole trilayer bender actuators.” IEEE/ASME Trans. Mechatron. 15 (1): 149–156. https://doi.org/10.1109/TMECH.2009.2020732.
Leang, K., Q. Zou, and S. Devasia. 2009. “Feedforward control of piezoactuators in atomic force microscope systems.” IEEE Control Syst. Mag. 29 (1): 70–82. https://doi.org/10.1109/MCS.2008.930922.
Masing, G. 1926. “Eigenspannungen und verfestigung beim messing (Self stretching and hardening for brass).” In Proc., 2nd Int. Congress for Applied Mechanics, 332–335. Zurich, Switzerland.
Mayergoyz, I. D. 1986. “Mathematical models of hysteresis.” Phys. Rev. Lett. 56 (15): 1518–1521. https://doi.org/10.1103/PhysRevLett.56.1518.
Murphy, K. P. 2012. Machine learning a probabilistic perspective. Cambridge, MA: MIT Press.
Nelder, J. A., and R. Mead. 1965. “A simplex method for function minimization.” Comput. J. 7 (4): 308–313. https://doi.org/10.1093/comjnl/7.4.308.
Nelles, O. 2001. Nonlinear system identification. Berlin: Springer.
Ortin, J. 1992. “Preisach modeling of hysteresis for a pseudoelastic Cu-Zn-Al single crystal.” J. Appl. Phys. 71 (3): 1454.
Preisach, F. 1935. “Uber die magnetische nachwirkung.” Z. Phys. 94 (5–6): 277–302. https://doi.org/10.1007/BF01349418.
Serpico, C., and C. Visone. 1998. “Magnetic hysteresis modeling via feed-forward neural networks.” IEEE Trans. Magn. 34 (3): 623–628. https://doi.org/10.1109/20.668055.
Shirley, M. E. 2003. “Identification of Preisach measures.” Ph.D. thesis, Texas Tech Univ.
Stakvik, J. Å., M. R. Ragazzon, A. A. Eielsen, and J. T. Gravdahl. 2015. “On implementation of the Preisach model: Identification and inversion for hysteresis compensation.” Model. Ident. Control Norw. Res. Bull. 36 (3): 133–142. https://doi.org/10.4173/mic.2015.3.1.
Suykens, J., and J. Vandewalle. 1999. “Least squares support vector machine classifiers.” Neural Process. Lett. 9 (3): 293–300. https://doi.org/10.1023/A:1018628609742.
Tan, X., and J. Baras. 2005. “Adaptive identification and control of hysteresis in smart materials.” IEEE Trans. Autom. Control 50 (6): 827–839. https://doi.org/10.1109/TAC.2005.849215.
Tan, X., and J. S. Baras. 2004. “Modeling and control of hysteresis in magnetostrictive actuators.” Automatica 40 (9): 1469–1480. https://doi.org/10.1016/j.automatica.2004.04.006.
Visintin, A. 1994. “Differential models of hysteresis.” Vol. 111 of Applied mathematical sciences. Berlin: Springer.
Xavier-de Souza, S., J. Suykens, J. Vandewalle, and D. Bolle. 2010. “Coupled simulated annealing.” IEEE Trans. Syst. Man Cybern. Part B Cybern. 40 (2): 320–335. https://doi.org/10.1109/TSMCB.2009.2020435.
Xu, Q. 2013. “Identification and compensation of piezoelectric hysteresis without modeling hysteresis inverse.” IEEE Trans. Ind. Electron. 60 (9): 3927–3937. https://doi.org/10.1109/TIE.2012.2206339.
Xu, Q., and P. K. Wong. 2011. “Hysteresis modeling and compensation of a piezostage using least squares support vector machines.” Mechatronics 21 (7): 1239–1251. https://doi.org/10.1016/j.mechatronics.2011.08.006.
Zakerzadeh, M. R., M. Firouzi, H. Sayyaadi, and S. B. Shouraki. 2010. “Hysteresis identification of shape memory alloy actuators using a novel artificial neural network based Presiach model.” In Vol. 1 of ASME Conf. on Smart Materials, Adaptive Structures and Intelligent Systems, 653–660. New York: ASME.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 144 • Issue 9 • September 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 22, 2017
Accepted: Apr 4, 2018
Published online: Jun 29, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 29, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.