Modeling Time and Frequency Domain Viscoelastic Behavior of Architectured Foams
Publication: Journal of Engineering Mechanics
Volume 144, Issue 6
Abstract
The time-dependent behavior of architected lightweight cellular solids or foams is important to investigate for various structural applications. In this paper, the authors studied the linear viscoelastic properties of a novel architectured foam based on the mathematically known Schwarz primitive (P) triply periodic minimal surface (TPMS), referred to here as P-foam, in both time and frequency domains. Here, three dimensional (3D) representative volume elements (RVEs) at different relative densities (i.e., the ratio of the foam’s density to the density of its solid counterpart) were generated and studied using the finite-element method. The effective time-dependent response of P-foams as a function of relative density and frequencies is investigated. For the first time, an approach similar to the time-temperature superposition principle (TTSP) was adopted to create the master curve of the observed relative density–dependent mechanical responses in both time and frequency domains. Reduced uniaxial, bulk, and shear stiffness-loss map results suggested that the P-foam possesses the highest bulk response whereas the highest damping can be achieved under uniaxial responses. Depending on the applications and loading conditions, variable-stiffness P-foam dampers can be designed with unique and optimized dynamic mechanical properties. Comparison of the relaxation responses of various generic cellular architectures with P-foam showed that the uniaxial response of P-foam is similar to that of Kelvin foam. However, shear relaxation and bulk responses are higher than simple cubic, body centered cubic, reinforced body centered cubic, and Gibson-Ashby foams. Based on RVE micromechanical simulations, a macroscopic constitutive model is proposed for modeling the viscoelastic behavior of structural systems made of the P-foam.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the help of Diab W. Abueidda and Ahmed S. Dalaq from the Masdar Institute in generating the P-foam CAD files.
References
ABAQUS [Computer software]. Dassault Systèmes, Waltham, MA.
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Lee, D.-W., Khan, K. A., and Jasiuk, I. (2016). “Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces.” Mech. Mater., 95, 102–115.
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Younes, H. A., Al Ghaferi, A. A., and Shah, T. K. (2015a). “Electrical conductivity of 3D periodic architectured interpenetrating phase composites with carbon nanostructured-epoxy reinforcements.” Compos. Sci. Technol., 118, 127–134.
Abueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., and Jasiuk, I. (2017). “Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures.” Mater. Des., 122, 255–267.
Abueidda, D. W., Dalaq, A. S., Abu Al-Rub, R. K., and Jasiuk, I. (2015b). “Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites.” Compos. Struct., 133, 85–97.
Abueidda, D. W., Dalaq, A. S., Abu Al-Rub, R. K., and Younes, H. A. (2015c). “Finite element predictions of effective multifunctional properties of interpenetrating phase composites with novel triply periodic solid shell architectured reinforcements.” Int. J. Mech. Sci., 92, 80–89.
Al-Ketan, O., Al-Rub, R. K. A., and Rowshan, R. (2017). “Mechanical properties of a new type of architected interpenetrating phase composite materials.” Adv. Mater. Tech., 2(2), 1600235.
Avalle, M., and Scattina, A. (2014). “Mechanical properties and impact behavior of a microcellular structural foam.” Lat. Am. J. Solids Struct., 11(2), 200–222.
Banhart, J., Ashby, M. F., and Fleck, N. A. (1999). “Metal foams and foam metal structures.” Proc., 1st Int. Conf. on Metal Foams and Porous Metal Structures (MetFoam’99), MIT, Bremen, Germany.
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., and Kraft, O. (2014). “High-strength cellular ceramic composites with 3D microarchitecture.” Proc. Natl. Acad. Sci., 111(7), 2453–2458.
Challis, V. J., Roberts, A. P., and Wilkins, A. H. (2008). “Design of three dimensional isotropic microstructures for maximized stiffness and conductivity.” Int. J. Solids Struct., 45(14–15), 4130–4146.
Christensen, R. (2012). Theory of viscoelasticity: An introduction, Elsevier, New York.
Christensen, R. M., and Feng, W. W. (1983). “Nonlinear compressive deformation of viscoelastic porous materials.” Mech. Mater., 2(3), 239–247.
Dalaq, A. S., Abueidda, D. W., and Abu Al-Rub, R. K. (2016). “Mechanical properties of 3D printed interpenetrating phase composites with novel architectured 3D solid-sheet reinforcements.” Compos. Part A: Appl. Sci. Manuf., 84, 266–280.
Darabi, M. K., Abu Al-Rub, R. K., Masad, E. A., and Little, D. N. (2012). “A thermodynamic framework for constitutive modeling of time- and rate-dependent materials. II: Numerical aspects and application to asphalt concrete.” Int. J. Plast., 35, 67–99.
El Ghezal, M. I., Maalej, Y., and Doghri, I. (2013). “Micromechanical models for porous and cellular materials in linear elasticity and viscoelasticity.” Comput. Mat. Sci., 70, 51–70.
Galusha, J. W., Richey, L. R., Gardner, J. S., Cha, J. N., and Bartl, M. H. (2008). “Discovery of a diamond-based photonic crystal structure in beetle scales.” Phys. Rev. E, 77(5), 050904.
Gibson, L. J. (2005). “Biomechanics of cellular solids.” J. Biomech., 38(3), 377–399.
Gibson, L. J., and Ashby, M. F. (1997). Cellular solids: Structure and properties, Cambridge University Press, New York.
Gong, L., and Kyriakides, S. (2005). “Compressive response of open cell foams. II: Initiation and evolution of crushing.” Int. J. Solids Struct., 42(5–6), 1381–1399.
Han, S. C., Lee, J. W., and Kang, K. (2015). “A new type of low density material: Shellular.” Adv. Mater., 27(37), 5506–5511.
Huang, J. S., and Gibson, L. J. (1991). “Creep of polymer foams.” J. Mater. Sci., 26(3), 637–647.
Huber, A. T., and Gibson, L. J. (1988). “Anisotropy of foams.” J. Mater. Sci., 23(8), 3031–3040.
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., and Schröder-Turk, G. E. (2011). “Minimal surface scaffold designs for tissue engineering.” Biomaterials, 32(29), 6875–6882.
Khaderi, S. N., Deshpande, V. S., and Fleck, N. A. (2014). “The stiffness and strength of the gyroid lattice.” Int. J. Solids Struct., 51(23–24), 3866–3877.
Khan, K. A., and Abu Al-Rub, R. K. (2017). “Time dependent response of architectured Neovius foams.” Int. J. Mech. Sci., 126, 106–119.
Khan, K. A., and Muliana, A. H. (2009). “A multi-scale model for coupled heat conduction and deformations of viscoelastic functionally graded materials.” Compos. Part B: Eng., 40(6), 511–521.
Khan, K. A., and Muliana, A. H. (2012). “Fully coupled heat conduction and deformation analyses of visco-elastic solids.” Mech. Time-Depend. Mater., 16(4), 461–489.
Li, K., Gao, X.-L., and Roy, A. K. (2003). “Micromechanics model for three-dimensional open-cell foams using a tetrakaidecahedral unit cell and Castigliano’s second theorem.” Compos. Sci. Technol., 63(12), 1769–1781.
Li, S. (2008). “Boundary conditions for unit cells from periodic microstructures and their implications.” Compos. Sci. Technol., 68(9), 1962–1974.
Luxner, M. H., Stampfl, J., and Pettermann, H. E. (2005). “Finite element modeling concepts and linear analyses of 3D regular open cell structures.” J. Mater. Sci., 40(22), 5859–5866.
Luxner, M. H., Stampfl, J., and Pettermann, H. E. (2007). “Numerical simulations of 3D open cell structures—Influence of structural irregularities on elasto-plasticity and deformation localization.” Int. J. Solids Struct., 44(9), 2990–3003.
Luxner, M. H., Woesz, A., Stampfl, J., Fratzl, P., and Pettermann, H. E. (2009). “A finite element study on the effects of disorder in cellular structures.” Acta Biomater., 5(1), 381–390.
Markert, B. (2008). “A biphasic continuum approach for viscoelastic high-porosity foams: Comprehensive theory, numerics, and application.” Arch. Comput. Methods Eng., 15(4), 371–446.
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., and Grijpma, D. W. (2010). “Mathematically defined tissue engineering scaffold architectures prepared by stereolithography.” Biomaterials, 31(27), 6909–6916.
Mills, N. J. (2006). “Finite element models for the viscoelasticity of open-cell Polyurethane foam.” Cellular Polymers, 25(5), 293–316.
Muliana, A., and Khan, K. A. (2008). “A time-integration algorithm for thermo-rheologically complex polymers.” Comput. Mater. Sci., 41(4), 576–588.
Nie, S., and Basaran, C. (2005). “A micromechanical model for effective elastic properties of particulate composites with imperfect interfacial bonds.” Int. J. Solids Struct., 42(14), 4179–4191.
Pettermann, H. E., and Hüsing, J. (2012). “Modeling and simulation of relaxation in viscoelastic open cell materials and structures.” Int. J. Solids Struct., 49(19–20), 2848–2853.
Plateau, J. (1873). Statique expérimentale et théorique des liquides soumis aux seules forces moléculaires, Gauthier-Villars, Paris.
Ramakrishnan, N., and Arunachalam, V. S. (1990). “Effective elastic moduli of porous solids.” J. Mater. Sci., 25(9), 3930–3937.
Roberts, A. P., and Garboczi, E. J. (2002). “Elastic properties of model random three-dimensional open-cell solids.” J. Mech. Phys. Solids, 50(1), 33–55.
Schoen, A. H. (1970). Infinite periodic minimal surfaces without self-intersections, National Aeronautics and Space Administration, Washington, DC.
SolidWorks [Computer software]. Dassault Systèmes, Waltham, MA.
Surface Evolver version 2.70 [Computer software]. Susquehanna Univ., Selinsgrove, PA.
Tadmor, E. B., Miller, R. E., and Elliott, R. S. (2012). Continuum mechanics and thermodynamics: From fundamental concepts to governing equations, Cambridge University Press, New York.
Torquato, S., and Donev, A. (2004). “Minimal surfaces and multifunctionality.” Proc. Royal Soc. London A: Math. Phys. Eng. Sci., 460(2047), 1849–1856.
Torquato, S., Hyun, S., and Donev, A. (2002). “Multifunctional composites: Optimizing microstructures for simultaneous transport of heat and electricity.” Phys. Rev. Lett., 89(26), 266601.
Vigliotti, A., and Pasini, D. (2013). “Mechanical properties of hierarchical lattices.” Mech. Mater., 62, 32–43.
Wadley, H. N. (2002). “Cellular metals manufacturing.” Adv. Eng. Mater., 4(10), 726–733.
Wadley, H. N. (2006). “Multifunctional periodic cellular metals.” Philos. Trans. Royal Soc. London A: Math. Phys. Eng. Sci., 364(1838), 31–68.
Warren, W. E., and Kraynik, A. M. (1997). “Linear elastic behavior of a low-density Kelvin foam with open cells.” J. Appl. Mech., 64(4), 787–794.
Wineman, A. S., and Rajagopal, K. R. (2000). Mechanical response of polymers: An introduction, Cambridge University Press, New York.
Xia, Z., Zhang, Y., and Ellyin, F. (2003). “A unified periodical boundary conditions for representative volume elements of composites and applications.” Int. J. Solids Struct., 40(8), 1907–1921.
Yoo, D. (2012). “Heterogeneous minimal surface porous scaffold design using the distance field and radial basis functions.” Med. Eng. Phys., 34(5), 625–639.
Zhang, J., Wei, H., Wang, Z., and Zhao, L. (2015). “Dynamic crushing of uniform and density graded cellular structures based on the circle arc model.” Lat. Am. J. Solids Struct., 12(6), 1102–1125.
Zhu, H. X., Knott, J. F., and Mills, N. J. (1997). “Analysis of the elastic properties of open-cell foams with tetrakaidecahedral cells.” J. Mech. Phys. Solids, 45(3), 319–343.
Zhu, H. X., and Mills, N. J. (1999). “Modelling the creep of open-cell polymer foams.” J. Mech. Phys. Solids, 47(7), 1437–1457.
Zohdi, T. I., and Wriggers, P., eds. (2005). An introduction to computational micromechanics, lecture notes in applied and computational mechanics, Springer, Berlin.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Feb 7, 2017
Accepted: Nov 9, 2017
Published online: Mar 26, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 26, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.