Structural Damage Identification Using Mode Shape Slope and Curvature
Publication: Journal of Engineering Mechanics
Volume 143, Issue 9
Abstract
Mode shape–based structural damage detection is an emerging field of research. This study presents a vibration-based damage localization technique using the derivatives of mode shapes corresponding to undamaged and damaged states of a structure. First, mathematical expressions of the derivatives of mode shapes have been formulated and correlated with the damage location. The mathematical derivation shows that the difference in mode shape slopes attains a Dirac delta function at the location of the damage. Also, the difference in mode shape curvature is discontinuous at the damage location. However, it attains extreme values around the damage location. For illustration purposes, simulation studies on a shear building have been carried out to show the derivatives of the first few mode shapes to be sensitive to the damage location. An experimental case study involving a shake-table test has also been performed on a miniature model of a 6-story steel frame to investigate the efficiency of the proposed technique in real situations. Therefore, the mathematical formulation followed by the numerical study as well as the experimental investigation shows the competence of the proposed approach in structural damage identification.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author would like to thank Dr. Samit Ray-Chaudhuri (Associate Professor, Department of Civil Engineering, IIT Kanpur, India) for his timely suggestion while conducting the shake-table test. The assistance received from the Structural Engineering Laboratory, Department of Civil Engineering, IIT Kanpur, in conducting the shake-table experiment is greatly appreciated.
References
Alvandi, A., and Cremona, C. (2006). “Assessment of vibration-based damage identification techniques.” J. Sound Vibr., 292(1–2), 179–202.
Bracewell, R. (1999). The Fourier transform and its applications, 3rd Ed., McGraw-Hill Science/Engineering/Math, New York.
Caicedo, J. M. (2011). “Practical guidelines for the natural excitation technique (NExT) and the eigensystem realization algorithm (ERA) for modal identification using ambient vibration.” Exp. Tech., 35(4), 52–58.
Caicedo, J. M., Dyke, S. J., and Johnson, E. A. (2004). “Natural excitation technique and eigensystem realization algorithm for phase I of the IASC-ASCE benchmark problem: Simulated data.” J. Eng. Mech. ASCE, 49–60.
Cao, M., Ye, L., Zhou, L., Su, Z., and Bai, R. (2011). “Sensitivity of fundamental mode shape and static deflection for damage identification in cantilever beams.” Mech. Sys. Signal Process., 25(2), 630–643.
Catbas, F., Brown, D., and Aktan, A. (2006). “Use of modal flexibility for damage detection and condition assessment: Case studies and demonstrations on large structures.” J. Struct. Eng. ASCE, 1699–1712.
Catbas, F. N., Gul, M., and Burkett, J. L. (2008). “Damage assessment using flexibility and flexibility-based curvature for structural health monitoring.” Smart Mater. Struct., 17(1), 015024.
Cawley, P., and Adams, R. D. (1979). “The locations of defects in structures from measurements of natural frequencies.” J. Strain Anal., 14(2), 49–57.
Chang, M., and Pakzad, S. (2014). “Optimal sensor placement for modal identification of bridge systems considering number of sensing nodes.” J. Bridge Eng., 04014019.
Clough, R. W., and Penzien, J. (2003). Dynamics of structures, Computers & Structures, Inc., Berkeley, CA.
Doebling, S. W., Farrar, C. R., and Goodman, R. S. (1997). “Effects of measurement statistics on the detection of damage in the Alamosa Canyon Bridge.” 15th Int. Modal Analysis Conf., Washington, DC, 919–929.
Farrar, C. R., et al. (1994). “Dynamic characterization and damage detection in the I-40 bridge over the Rio Grande.”, Los Alamos National Laboratory, NM.
Farrar, C. R., Doebling, S. W., Cornwell, P. J., and Straser, E. G. (1997). “Variability of modal parameters measured on the Alamosa Canyon Bridge.” 15th Int. Modal Analysis Conf., Office of Scientific and Technical Information, Washington, DC, 257–263.
Grewal, B. S. (2002). Higher engineering mathematics, Khanna Publishers, New Delhi, India.
Juang, J. N., Cooper, J. E., and Wright, J. R. (1988). “An eigensystem realization algorithm using data correlations (ERA/DC) for modal parameter identification.” Control-Theory Adv. Technol., 4(1), 5–14.
Kim, J. T., Ryu, Y. S., Cho, H. M., and Stubbs, N. (2003). “Damage identification in beam-type structures: Frequency-based method vs mode-shape-based method.” Eng. Struct., 25(1), 57–67.
Lee, E. T., and Eun, H. C. (2008). “Damage detection of damaged beam by constrained displacement curvature.” J. Mech. Sci. Technol., 22(6), 1111–1120.
Lifshitz, J. M., and Rotem, A. (1969). “Determination of reinforcement unbonding of composites by a vibration technique.” J. Composite Mater., 3(3), 412–423.
Lin, J., and Xu, Y. (2016). “Two-stage covariance-based multisensing damage detection method.” J. Eng. Mech., B4016003.
National Instruments Corporation. (2011). “A global leader in test, measurement, and control solutions.” Austin, TX, ⟨www.ni.com⟩ (Jan. 10, 2015).
Oldham, K. B., Myland, J., and Spanier, J. (1987). An atlas of functions: With Equator, the atlas function calculator, Hemisphere, Carlsbad, CA.
Pandey, A. K., Biswas, M., and Samman, M. M. (1991). “Damage detection from changes in curvature mode shapes.” J. Sound Vibr., 145(2), 321–332.
Parks, T. W., and Burrus, C. S. (1987). Digital filter design, Wiley-Interscience, New York.
PCB (Piezotronics). (2013). “Sensors for research and development and machinery health monitoring.” MTS Systems Corporation, Depew, NY, ⟨www.pcb.com⟩ (Jun. 17, 2015).
Roy, K., and Ray-Chaudhuri, S. (2013). “Fundamental mode shape and its derivatives in structural damage localization.” J. Sound Vibr., 332(21), 5584–5593.
Salawu, O. (1997). “Detection of structural damage through changes in frequency: A review.” Eng. Struct., 19(9), 718–723.
Shi, Z., Law, S. S., and Zhang, L. M. (2000). “Damage localization by directly using incomplete mode shapes.” J. Eng. Mech., 656–660.
Sim, S., Spencer, B. J., and Nagayama, T. (2011). “Multimetric sensing for structural damage detection.” J. Eng. Mech., 22–30.
Simon, P., Goldack, A., and Narasimhan, S. (2016). “Mode shape expansion for lively pedestrian bridges through kriging.” J. Bridge Eng., 04016015.
Stubbs, N., and Osegueda, R. (1990). “Global non-destructive damage evaluation in solids.” Int. J. Anal. Exp. Modal Anal., 5(2), 67–79.
Wahab, M. M. A., and Roeck, G. D. (1999). “Damage detection in bridges using modal curvatures: Application to a real damage scenario.” J. Sound Vibr., 266(2), 217–235.
Whalen, T. M. (2008). “The behavior of higher order mode shape derivatives in damaged, beam-like structures.” J. Sound Vibr., 309(3–5), 426–464.
Xu, Z., and Wu, K. (2012). “Damage detection for space truss structures based on strain mode under ambient excitation.” J. Eng. Mech., 1215–1223.
Zhao, J., and DeWolf, J. (2002). “Dynamic monitoring of steel girder highway bridge.” J. Bridge Eng., 350–356.
Zhao, J., and DeWolf, J. T. (1999). “Sensitivity study for vibrational parameters used in damage detection.” J. Struct. Eng., 410–416.
Zhu, H., Li, L., and He, X. Q. (2011). “Damage detection method for shear buildings using the changes in the first mode shape slopes.” Comput. Struct., 89(9–10), 733–743.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 6, 2015
Accepted: Mar 14, 2017
Published online: Jul 14, 2017
Published in print: Sep 1, 2017
Discussion open until: Dec 14, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.