Fracture Mechanics Model of Anchor Group Breakout
Publication: Journal of Engineering Mechanics
Volume 143, Issue 4
Abstract
Linear elastic fracture mechanics-based discrete crack propagation simulations are presented as the pullout of an anchor group from a concrete matrix. The group was modeled as a periodic arrangement of anchors and load-carrying capacities and crack paths were determined as functions of relative depth and spacing. The results suggest that American Concrete Institute design formulas for predicting the capacity of group anchors are highly conservative, and that three-dimensional fracture mechanics-based simulations offer great promise for improving design formulas associated with specific anchor geometries and loadings.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI (American Concrete Institute). (1989). “Code requirements for nuclear safety.” ACI #349.1R, Detroit.
ACI (American Concrete Institute). (2006). “Code requirements for nuclear safety related concrete structures (ACI 349-06) and commentary (349R-06).” ACI 349-06, 349R-06, Detroit.
ACI (American Concrete Institute). (2008). “Building code requirements for structural concrete (ACI 318-08) and commentary (318R-08).” ACI 318-08, 318R-08, Detroit.
Ballarini, R., Keer, L. M., and Shah, S. P. (1987). “An analytical model for the pull-out of rigid anchors.” Int. J. Fract., 33(2), 75–94.
Ballarini, R., Shah, S. P., and Keer, L. M. (1986). “Failure characteristics of short anchor bolts embedded in a brittle material.” Proc. R. Soc. London, A404, 35–54.
Elfgren, L. (1998). “Round robin analyses and tests of anchor bolts in concrete structures.” RILEM technical committee 90-FMA: Fracture mechanics of concrete applications, RILEM, Cachan Cedex, France.
Elfgren, L., and Ohlsson, U. (1992). “Anchor bolts modeled with fracture mechanics.” Application of fracture mechanics to reinforced concrete, A. Carpinteri, ed., Elsevier, London.
Eligehausen, R., and Balogh, T. (1995). “Behavior of fasteners loaded in tension in cracked reinforced concrete.” ACI J., 92(3), 365–379.
Eligehausen, R., Mallée, R., and Silva, J. (2006). Anchorage in concrete construction, Ernst and Sohn, Berlin.
Eligehausen, R., and Sawade, G. (1989). “Analysis of anchorage behaviour (literature review).” Fracture mechanics of concrete structures: From theory to applications, L. Elfgren, ed., Chapman and Hall, London.
FRANC-2D [Computer software]. Cornell Fracture Group, Ithaca, NY.
Fuchs, W., Eligehausen, R., and Breen, J. E. (1995). “Concrete capacity design (CCD) approach for fastening to concrete.” ACI J., 92(1), 73–94.
Gordeliy, E., Piccinin, R., Napier, J. A. L., and Detournay, E. (2013). “Axisymmetric benchmark solutions in fracture mechanics.” Eng. Fract. Mech., 102, 348–357.
Karihaloo, B. L. (1996). “Pull-out of axisymmetric headed anchors.” Mater. Struct., 29(3), 152–157.
Klinger, R. E., and Mendonca, J. A. (1982). “Tensile capacity of short anchor bolts and welded studs: A literature review.” ACI J., 79(27), 270–279.
Krenchel, H., and Shah, S. P. (1985). “Fracture analysis of the pullout test.” Mater. Struct., 18(6), 439–446.
Ozbolt, J., and Eligehausen, R. (1992). “Fastening elements in concrete structures—Numerical simulations.” Proc., Fracture of Concrete and Rock, 2nd Int. Conf., H. P. Rossmanith, ed., E & FN Spon, London.
Ozbolt, J., Eligehausen, R., and Reinhardt, H. W. (1999). “Size effect on the concrete cone pull-out load.” Int. J. Fract., 95(1–4), 391–404.
Piccinin, R., Ballarini, R., and Cattaneo, S. (2010). “Linear elastic fracture mechanics pullout analyses of headed anchors in stressed concrete,” J. Eng. Mech., 761–768.
Piccinin, R., Ballarini, R., and Cattaneo, S. (2012). “Pullout capacity of headed anchors in prestressed concrete,” J. Eng. Mech., 877–887.
Vogel, A., and Ballarini, R. (1999). “Ultimate load capacities of plane and axisymmetric headed anchors.” J. Eng. Mech., 1276–1279.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Jun 7, 2016
Accepted: Sep 30, 2016
Published online: Nov 29, 2016
Published in print: Apr 1, 2017
Discussion open until: Apr 29, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.