Finite-Element Formulation for the Lateral Torsional Buckling of Plane Frames
Publication: Journal of Engineering Mechanics
Volume 139, Issue 4
Abstract
A finite-element formulation is developed for the lateral torsional buckling analysis of plane frames with moment connections consisting of two pairs of welded plate stiffeners. The finite element provides a realistic representation of the partial warping restraint provided by the joint to the adjoining members. The element consists of two nodes with four generalized buckling degrees of freedom per node and is thus devised to interface with two classical beam buckling elements connected at right angles. The new finite element extends the functionality of the classical beam finite element to predict the lateral buckling load for noncollinear structures, such as portal frames. A comparison with results based on shell finite-element analysis demonstrates the ability of the new formulation to reliably predict the lateral buckling resistance of plane frames at a fraction of the computational and modeling cost of shell-based finite-element solutions.
Get full access to this article
View all available purchase options and get full access to this article.
References
American National Standards Institute/AISC. (2005). “Specification for structural steel buildings.” ANSI/AISC-360, Chicago.
Barsoum, R. S., and Gallagher, R. H. (1970). “Finite element analysis of torsional and lateral stability problems.” Int. J. Numer. Methods Eng., 2(3), 335–352.
Basaglia, C., Camotim, D., and Silvestre, N. (2008). “Global buckling analysis of plane and space thin-walled frames in the context of GBT.” Thin-Walled Struct., 46(1), 79–101.
Basaglia, C., Camotim, D., and Silvestre, N. (2009). “GBT-based local, distortional and global buckling analysis of thin-walled steel frames.” Thin-Walled Struct., 47(11), 1246–1264.
Basaglia, C., Camotim, D., and Silvestre, N. (2012). “Torsion warping transmission at thin-walled framed joints: Kinematics, modelling and structural response.” J. Constr. Steel Res., 69(1), 39–53.
Bathe, K. J. (1996). Finite element procedures, Prentice Hall, Englewood Cliffs, NJ.
Bazant, Z. P., and Cedolin, L. (1991). Stability of structures, Oxford University Press, Oxford, U.K.
Budiansky, B. (1974). Theory of buckling and postbuckling behavior of elastic structures: Advances in applied mechanics 14, C. S. Yih, ed., Academic Press, New York.
Dabbas A. (2002). “Lateral stability of partially restrained cantilever supports.” M.Eng. Rep., Dept. of Civil Engineering, Univ. of Ottawa, Ottawa.
Erkmen, R. E., and Mohareb, M. (2008a). “Buckling analysis of thin-walled open members—A complementary energy variational principle.” Thin-Walled Struct., 46(6), 602–617.
Erkmen, R. E., and Mohareb, M. (2008b). “Buckling analysis of thin-walled open members—A finite element formulation.” Thin-Walled Struct., 46(6), 618–636.
Ettouney, M. M., and Kirby, J. B. (1981). “Warping restraint in three-dimensional frames.” J. Struct. Div., 107(8), 1643–1656.
European Committee for Standardization (CEN). (2005). “Eurocode 3: Design of steel structures–Part 1-1: General rules and rules for buildings.” EN 1993 1-1, Brussels, Belgium.
Hartmann, A. J., and Munse, W. H. (1966). “Flexural torsional buckling of planar frames.” J. Eng. Mech. Div., 92(2), 37–60.
Krenk, S., and Damkilde, L. (1991). “Warping of joints in I-beam assemblages.” J. Eng. Mech., 117(11), 2457–2474.
MacPhedran, I. J., and Grondin, G. Y. (2009). “Frame stability considering interaction and compatibility of warping deformations.” Rep. SER 283, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, AB, Canada.
Magued, M. H. (1971). “Elastic flexural-torsional buckling of rectangular frames.” M.S. Carlton Univ., Ottawa.
Masarira, A. (2002). “The effect of joints on the stability behaviour of steel frame beams.” J. Constr. Steel Res., 58(10), 1375–1390.
Minghini, F., Tullini, N., and Laudiero, F. (2009). “Elastic buckling analysis of pultruded FRP portal frames having semi-rigid connections.” Eng. Struct., 31(2), 292–299.
Mohareb, M., and Dabbas, A. (2003). “Lateral stability of partially restrained cantilever supports.” Proc. of the Annual Technical Session and Meeting, Structural Stability Research Council, Rolla, MO, 671–694.
Morrel, P. J. B. (1979). “The influence of joint detail on the torsional behaviour of thin-walled structures having an axial discontinuity.” Proc., Int. Conf. Thin-Walled Struct., Univ. of Strathclyde, Glasgow, Scotland, 539–556.
Nethercot, D. A. (1974). “Torsional-flexural buckling effects in portal frames.” J. Struct. Div., 100(9), 1985–1999.
Papangelis, J. P., Trahair, N. S., and Hancock, G. J. (1998). “Elastic flexural-torsional buckling of structures by computer.” Comput. Struct., 68(1–3), 125–137.
Pi, Y. L., and Trahair, N. S. (2000). “Distortion and warping at beam supports.” J. Struct. Eng., 126(11), 1279–1287.
Reddy, J. N. (1993). An introduction to the finite element method, McGraw Hill, New York.
Rizzi, N. V., and Varano, V. (2011). “The effects of warping on postbuckling behaviour of thin-walled structures.” Thin-Walled Struct., 49(9), 1091–1097.
Salvadori, M. G. (1953). “Stability of I-Beams under thrust and unequal end moments.” Proc., ASCE, 79(291), 1–25.
Sharman, P. W. (1985). “Analysis of structures with thin-walled open sections.” Int. J. Mech. Sci., 27(10), 665–677.
SIMULIA [Computer software]. Providence, RI, Dassault Systemes Simulia Corp.
Tong, G. S., Yan, X. X., and Zhang, L. (2005). “Warping and bimoment transmission through diagonally stiffened beam-to-column joints.” J. Constr. Steel Res., 61(6), 749–763.
Trahair, N. S. (1993). Flexural-torsional buckling of structures, CRC Press Boca Raton, FL.
Trahair, N. S. (2009). “Buckling analysis design of steel frames.” J. Constr. Steel Res., 65(7), 1459–1463.
Vacharajittiphan, P., and Trahair, N. S. (1974). “Warping and distortion at I-section Joints.” J. Struct. Div., 100(3), 547–564.
Wu, L. (2010). “Finite element formulations for lateral-torsional buckling of shear deformable planar frames.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Ottawa, Ottawa.
Wu, L., and Mohareb, M. (2011a). “Buckling formulation for shear deformable thin-walled members—I. Variational principle and analytical solutions.” Thin-Walled Struct., 49(1), 197–207.
Wu, L., and Mohareb, M. (2011b). “Buckling formulation for shear deformable thin-walled members—II. Finite element formulation.” Thin-Walled Struct., 49(1), 208–222.
Yang, Y. B., and McGuire, W. (1984). “A procedure for analysing space frames with partial warping restraint.” Int. J. Numer. Methods Eng., 20(8), 1377–1398.
Ziemian, R. D. (2010). Guide to stability design criteria for metal structures, 6th Ed., Wiley, Hoboken, NJ.
Zinoviev, I., and Mohareb, M. (2004). “Analysis and design of laterally unsupported portal frames for out-of-plane stability.” Can. J. Civ. Eng., 31(3), 440–452.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 16, 2011
Accepted: Jun 7, 2012
Published online: Jul 28, 2012
Published in print: Apr 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.