Three-Dimensional Dynamics of a Rigid Body with Wheels on a Moving Base
Publication: Journal of Engineering Mechanics
Volume 139, Issue 4
Abstract
For reasons more related to functionality than safety, it is not uncommon for heavy mechanical and electrical equipment to be placed on wheels. Examples of such devices are medical carts, mechanical equipment in hospitals, electrical transformers, and recently, even supercomputers. Although wheels facilitate the operation of these devices, they also affect the response of these objects during earthquakes, but not necessarily in a beneficial way. While a wheel rolling favors the translational displacement of the body in the horizontal direction parallel to its plane over rocking, rocking is still possible along the plane perpendicular to the plane of the wheel. Moreover, because the plane of the wheel is in most cases free to rotate with respect to the body, it is not easy to identify the directions that favor rocking or displacement at any time. The problem becomes even more complicated, if one considers that one of the wheels, which can swivel, may be locked. Thus, in the most general case, a body on wheels experiences three-dimensional displacements and rotations along with the three-dimensional dynamics of the wheels. In this work, a model for the dynamic behavior of bodies on wheels is presented and the corresponding response behavior is examined for several common cases.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the support of the U.S. National Science Foundation, which partially supported this research under Grant No. CMMI-1200859.
References
Brendel, L., and Dippel, S. (1998). “Lasting contacts in molecular dynamics simulations.” Physics of dry granular media, H. H. Hermann, J.-P. Hovi, and S. Luding, eds., Vol. 313, Kluwer Academic Publishers, Dordrecht, Netherlands.
Chatzis, M. N., and Smyth, A. W. (2012a). “Modeling of the 3D rocking problem.” Int. J. Nonlinear Mech., 47(4), 85–98.
Chatzis, M. N., and Smyth, A. W. (2012b). “Robust modeling of the rocking problem.” J. Eng. Mech., 138(3), 247–262.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
de Falco, D., Di Mass, G., and Pagano, S. (2010). “On the castor dynamic behavior.” J. Franklin Inst., 347(1), 116–129.
Giannakopoulos, A. E. (1989). “The return mapping method for the integration of friction constitutive relations.” Comp. Struct., 32(1), 157–167.
Greenwood, D. T. (2003). Advanced dynamics, Cambridge University Press, Cambridge, UK.
Hastings, S. P., and McLeod, J. B. (1993). “Chaotic motion of a pendulum with oscillatory forcing.” Am. Math. Mon., 100(6), 563–572.
Hollerbach, J. M. (1980). “A recursive Lagrangian formulation of maniputator dynamics and a comparative study of dynamics formulation complexity.” IEEE Trans. Syst. Man Cybernet., 10(11), 730–736.
Housner, G. W. (1963). “The behavior of inverted pendulum structures during earthquakes.” Bull. Seismol. Soc. Am., 53(2), 403–417.
Hubbard, J. H. (1999). “The forced damped pendulum: Chaos, complication and control.” Am. Math. Mon., 106, 741–758.
Ishiyama, Y. (1982). “Motion of rigid bodies and criteria for overturning by earthquake excitations.” J. Earthquake Eng. Struct. Dyn., 10(10), 635–650.
Koh, A., and Hsiung, C. M. (1991). “Base isolation benefits of 3d rocking and uplift. I: Theory.” J. Eng. Mech., 117(1), 1–18.
Konstantinidis, D., and Makris, N. (2007). “The dynamics of a rocking block in three dimensions.” 8th Hellenic Soc. of Theor. and Appl. Mech. (HSTAM) Int. Congress on Mechanics, Patras, Greece.
Kraus, P. R., Fredriksson, A., and Kumar, V. (1997). “Modeling of frictional contacts for dynamic simulation.” Proc., IROS 1997 Workshop on Dynamic Simulation: Methods and Applications, IROS '97 1997 IEEE/RSJ Int. Conf. on Intelligent Robotics and Systems, Grenoble, France.
Lai, Y.-C., and Tél, T. (2011). Transient chaos complex dynamics on finite time scales, Springer, New York.
Le Saux, C., Leine, R. I., and Glocker, C. (2005). “Dynamics of a rolling disk in the presence of dry friction.” J. Nonlinear Sci., 15(1), 27–61.
Li, Y., and Shi, B. (2008). “Response of 3D free axisymmetrical rigid objects under seismic excitations.” 〈http://adsabs.harvard.edu/abs/2008arXiv0807.2101Y〉 (Jul. 2008).
Luding, S. (2008). “Cohesive, frictional powders: Contact models for tension.” Granul. Matter, 10(4), 235–246.
O’Reilly, O. M. (1996). “The dynamics of rolling disks and sliding disks.” Nonlinear Dyn., 10(3), 287–305.
Pacific Earthquake Engineering Research Center. (2011). PEER ground motion database. 〈http://peer.berkeley.edu/products/strong_ground_motion_db.html〉 (May 18. 2011).
Psycharis, I. N., and Jennings, P. C. (1983). “Rocking of slender rigid bodies allowed to uplift.” Earthquake Eng. Struct. Dynam., 11(1), 57–76.
Shenton, H., and Jones, N. (1991). “Base excitation of rigid bodies. 1: Formulation.” J. Eng. Mech., 117(10), 2286–2306.
Srinivasan, M., and Ruina, A. (2008). “Rocking and rolling: A can that appears to rock might actually roll.” Phys. Rev. E Stat. Nonlin. Soft Matter Phys., 78(6), 066609.
Stépán, G. (1991). “Chaotic motion of wheels.” Veh. Syst. Dyn., 20(6), 341–351.
Wriggers, P., Vu Van, T., and Stein, E. (1990). “Finite element formulation of large deformation impact-contact problems with friction.” Comp. Struct., 37(3), 319–331.
Zhang, J., and Makris, N. (2001). “Rocking response of free-standing blocks under cycloidal pulses.” J. Eng. Mech., 127(5), 473–483.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 9, 2011
Accepted: Apr 19, 2012
Published online: Apr 23, 2012
Published in print: Apr 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.