Modeling Stress-Dilatancy for Sand under Compression and Extension Loading Conditions
Publication: Journal of Engineering Mechanics
Volume 136, Issue 6
Abstract
Experimental results show very different stress-dilatancy behavior for sand under compression and extension loading conditions. In order to describe the behavior in both compression and extension conditions, two separate dilatancy equations are needed; one for each case. Furthermore, the effect of inherent anisotropy has not been considered in those equations. In this paper, a new micromechanics based method is presented, by which the stress dilatancy relation is obtained by considering the slip mechanism of the interparticle contacts in all orientations. The method also accounts for the effect of inherent anisotropy in sand. Experimental results on Hostun sand and LSI-30 sand are used for illustration the proposed method.
Get full access to this article
View all available purchase options and get full access to this article.
References
Biarez, J., and Hicher, P. Y. (1994). “Elementary mechanics of soil behavior.” Balkema, Rotterdam, The Netherlands, 208.
Chang, C. S., and Hicher, P. Y. (2005). “An elastic-plastic model for granular materials with microstructural consideration.” Int. J. Solids Struct., 42(14), 4258–4277.
Chang, C. S., and Misra, A. (1990). “Application of uniform strain theory to heterogeneous granular solids.” J. Eng. Mech., 116(10), 2310–2328.
Christofferson, J., Mehrabadi, M. M., and Nemat-Nassar, S. (1981). “A micromechanical description on granular material behavior.” ASME J. Appl. Mech., 48, 339–344.
Doanh, T., Ibraim, E., and Matiotti, R. (1997). “Undrained instability of very loose Hostun sand in triaxial compression and extension. Part 1: Experimental observations.” Mech. Cohesive-Frict. Mater., 2(1), 47–70.
Gajo, A., and Muir Wood, D. (1999). “Severn-Trent sand: A kinematic hardening constitutive model: The q-p formulation.” Geotechnique, 49(5), 595–614.
Ishihara, K., and Towhata, I. (1983). “Cyclic behavior of sand during rotation of principal axes.” Mechanics of granular materials: New models and constitutive relations, Elsevier Science, Amsterdam, The Netherlands, 55–73.
Jefferies, M. G. (1993). “NorSand: A simple critical state model for sand.” Geotechnique, 43, 91–103.
Lade, P. V., and Bopp, P. A. (2005). “Relative density effects on drained sand behavior at high pressures.” Soils Found., 45, 1–13.
Lanier, J., and Zitouni, Z. (1988). “Development of a data base using the grenoble true triaxial apparatus.” Constitutive equations for granular non-cohesive soils, A. Saada and G. Bianchinin, eds., Balkema, Rotterdam, The Netherlands, 47–58.
Li, X. S., Dafalias, Y. F., and Wang, Z. L. (1999). “State-dependent dilatancy in critical-state constitutive modeling of sand.” Can. Geotech. J., 36, 599–611.
Luong, M. P. (1980). “Stress-strain aspects of cohesionless soils under cyclic and transient loading.” Proc., Int. Symp. on Soils under Cyclic and Transient Loading, Balkema, Rotterdam, The Netherlands, 253–376.
Manzari, M. T., and Dafalias, Y. F. (1997). “A critical state two-surface plasticity model for sands.” Geotechnique, 47(2), 255–272.
Miura, S., and Toki, S. (1984). “Anisotropy in mechanical properties and its simulation of sands sampled from natural deposits.” Soils Found., 24(3), 69–84.
Nova, R. (1982). “A constitutive model for soil under monotonic and cyclic loading.” Soil mechanics transient and cyclic loads, G. N. Pande and O. C. Zienkiewicz, eds., Wiley, New York, 343–373.
Reynolds, O. (1885). “On the dilatancy of media composed of rigid particles in contact, with experimental illustrations.” Philos. Mag., 5(20), 469–481.
Roscoe, K. H., Schofield, A. N., and Thurairajah, A. (1963). “Yielding of clays in states wetter than critical.” Geotechnique, 13(3), 211–240.
Rothenburg, L. and Selvadurai, A. P. S., and (1981). “Micromechanical definitions of the Cauchy stress tensor for particular media.” Mechanics of structured media, A. P. S. Selvadurai, ed., Elsevier, Amsterdam, The Netherlands, 469–486.
Rowe, P. W. (1962). “The stress-dilatancy relations for static equilibrium of an assembly of particles in contact.” Proc. R. Soc. London, Ser. A, 269, 500–527.
Rowe, P. W. (1969). “The relation between the shear strength of sand in triaxial compression, plane strain and direct shear.” Geotechnique, 19(1), 75–86.
Saada, A., Puccini, P., and Bianchini, G. (1988). “Information package.” Constitutive equations for granular non-cohesive soils, A. Saada and G. Bianchinin, eds., Balkema, Rotterdam, The Netherlands, 81–87.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw-Hill, London.
Taiebat, M., and Dafalias, Y. F. (2008). “SANISAND: Simple anisotropic sand plasticity model.” Int. J. Numer. Analyt. Meth. Geomech., 32(8), 915–948.
Taylor, D. W. (1948). Fundamentals of soil mechanics, Wiley, New York.
Wan, R. G., and Guo, P. J. (2001). “Drained cyclic behavior of sand with fabric dependence.” J. Eng. Mech., 127(11), 1106–1116.
Yamada, Y., and Ishihara, K. (1979). “Anisotropic deformation characteristics of sand under three-dimensional stress conditions.” Soils Found., 19, 79–94.
Yang, Y., and Muraleetharan, K. K. (2003). “Middle surface concept and its application to elastoplastic behavior of saturated sands.” Geotechnique, 53(4), 421–431.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Sep 25, 2009
Accepted: Nov 6, 2009
Published online: Nov 9, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.