Engineered Injection and Extraction for In Situ Remediation of Sorbing Solutes in Groundwater
Publication: Journal of Environmental Engineering
Volume 141, Issue 6
Abstract
Engineered injection and extraction (EIE) is a method of in situ remediation of contaminated groundwater in which a treatment chemical that reacts with the contaminant is injected into the contaminated aquifer, and a series of injections and extractions of clean water are performed in nearby wells to promote the spreading of the treatment chemical throughout the contaminated aquifer. Numerical simulations are used to investigate the use of EIE for sorbing groundwater contaminants. The aquifer is homogeneous and confined with negligible ambient groundwater flow. A range of sorption parameters are considered for both linear equilibrium sorption and linear kinetic sorption, and both instantaneous and rate-limited bimolecular reactions are discussed. An effective EIE sequence is developed for a sorbing contaminant and is compared with a sequence developed for aqueous, nonsorbing contaminants. The results show that for contaminants that exhibit fast sorption and fast reaction, the EIE sequence developed for sorbing contaminants can achieve nearly complete contaminant degradation. For contaminants with linear equilibrium sorption and rate-limited reaction, the sequence can achieve nearly complete degradation if the duration of the remediation process is scaled with the inverse of the reaction rate constant. For contaminants that exhibit slow sorption, the EIE sequence designed for aqueous, nonsorbing contaminants achieves higher overall contaminant degradation, but requires more energy and higher injection and extraction rates.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the National Science Foundation under grants EAR-1113996, EAR-1114060, EAR-1417005, and EAR-1417017. The authors thank John Brodt for developing a reaction algorithm that was used in this work. The authors also thank two anonymous reviewers for their helpful comments.
References
Bahr, J. M., and Rubin, J. (1987). “Direct comparison of kinetic and local equilibrium formulations for solute transport affected by surface reactions.” Water Resour. Res., 23(3), 438–452.
Cirpka, O. A. (2005). “Effects of sorption on transverse mixing in transient flows.” J. Contam. Hydrol., 78(3), 207–229.
Cirpka, O. A., de Barros, F. P. J., Chiogna, G., Rolle, M., and Nowak, W. (2011). “Stochastic flux-related analysis of transverse mixing in two-dimensional heterogeneous porous media.” Water Resour. Res., 47(6), W06515.
Dagan, G., Bellin, A., and Rubin, Y. (1996). “Lagrangian analysis of transport in heterogeneous formations under transient flow conditions.” Water Resour. Res., 32(4), 891–899.
Dentz, M., Le Borgne, T., Englert, A., and Bijeljic, B. (2011). “Mixing, spreading and reaction in heterogeneous media: A brief review.” J. Contam. Hydrol., 120–121, 1–17.
Funakoshi, M. (2008). “Chaotic mixing and mixing efficiency in a short time.” Fluid Dyn. Res., 40(1), 1–33.
Huang, W., Peng, P., Yu, Z., and Fu, J. (2003). “Effects of organic matter heterogeneity on sorption and desorption of organic contaminants by soils and sediments.” Appl. Geochem., 18(7), 955–972.
Le Bornge, T., Dentz, M., Bolster, D., Carrera, J., de Druezy, J.-R., and Davy, P. (2010). “Non-Fickian mixing: Temporal evolution of the scalar dissipation rate in heterogeneous porous media.” Adv. Water Resour., 33(12), 1468–1475.
Li, D., and Kaplan, D. I. (2012). “Sorption coefficients and molecular mechanisms of Pu, U, Np, Am and Tc to Fe(hydr)oxides: A review.” J. Hazard. Mater., 243, 1–18.
Li, X., Huang, H., and Meakin, P. (2008). “Level set simulation of coupled advection-diffusion and pore structure evolution due to mineral precipitation in porous media.” Water Resour. Res., 44(12), W12407.
Luo, J., et al. (2007). “Modeling in-situ uranium(VI) bioreduction by sulfate-reducing bacteria.” J. Contam. Hydrol., 92(1–2), 129–148.
Mays, D. C., and Neupauer, R. M. (2012). “Plume spreading in groundwater by stretching and folding.” Water Resour. Res., 48(7), W07501.
Morrison, S. J., Mushovic, P. S., and Niesen, P. L. (2006). “Early breakthrough of molybdenum and uranium in a permeable reactive barrier.” Environ. Sci. Technol., 40(6), 2018–2024.
Oya, S., and Valocchi, A. J. (1997). “Characterization of traveling waves and analytical estimation of pollutant removal in one-dimensional subsurface bioremediation modeling.” Water Resour. Res., 33(5), 1117–1127.
Oya, S., and Valocchi, A. J. (1998). “Analytical approximation of biodegradation rate for in situ bioremediation of groundwater under ideal radial flow conditions.” J. Contam. Hydrol., 31(3–4), 275–293.
Piscopo, A. N., Neupauer, R. M., and Mays, D. C. (2013). “Engineered injection and extraction to enhance reaction for improved in situ remediation.” Water Resour. Res., 49(6), 3618–3625.
Schirmer, M., Durrant, G. C., Molson, J. W., and Frind, E. O. (2000). “Influence of transient flow on contaminant biodegradation.” Ground Water, 39(2), 276–282.
Selim, H. M. (2013). “Transport and retention of heavy metal in soils: Competitive sorption.” Adv. Agron., 119, 275–308.
Tebes-Stevens, C. L., Espinosa, F., and Valocchi, A. J. (2001). “Evaluating the sensitivity of a substrate multicomponent reactive transport model with respect to transport and reaction parameters.” J. Contam. Hydrol., 52(1–4), 3–27.
Valocchi, A. J. (1985). “Validity of the local equilibrium assumption for modeling sorbing solute transport through homogeneous soils.” Water Resour. Res., 21(6), 808–820.
Valocchi, A. J., and Quinodoz, H. A. (1989). “Application of the random walk method to simulate the transport of kinetically adsorbing solutes.” Proc., Int. Association of Hydrological Sciences Third Scientific Assembly: Groundwater Contamination, IAHS Press, Wallingford, U.K., 35–38.
Yan, Y. E., and Schwartz, F. W. (1999). “Oxidative degradation and kinetics of chlorinated ethylenes by potassium permanganate.” J. Contam. Hydrol., 37(3–4), 343–365.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 141 • Issue 6 • June 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 20, 2014
Accepted: Oct 21, 2014
Published online: Dec 15, 2014
Discussion open until: May 15, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.