Effects of Coagulation on the Ceramic Membrane Fouling during Surface Water Treatment
Publication: Journal of Environmental Engineering
Volume 141, Issue 5
Abstract
Evaluating the pretreatment conditions and fouling behavior is a prerequisite to the effective implementation of the coagulation-ceramic membrane hybrid processes for surface water treatment. Little is known about the performance of the hybrid processes; previous studies have dealt mainly with polymeric membranes. A coagulation-ceramic microfiltration system performed better in the treatment of select U.S. surface waters than a polymeric counterpart in terms of relative pressure in a constant-flux mode and normalized flux in a constant-pressure mode. The operating pressure for the filtration of river waters with the ceramic membrane system was 2.1–2.8 times the pressure for pure water, while it was 3.7–5.6 times with the polymeric membrane system, and the normalized flux in a constant pressure mode was higher with the ceramic membrane system (0.54 and 0.44 for ceramic and polymeric systems, respectively). Less severe fouling and higher cleaning efficiency observed in the ceramic hybrid system suggest that the coagulation would be a robust pretreatment option for the application of ceramic filtration for the surface water treatment.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Water Research Foundation (Project No. 04292). The authors thank Dr. James E. Amburgey and Amir Y. Alansari at University of North Carolina at Charlotte, North Carolina, for sharing the water samples and for fruitful discussions.
References
Akhondi, E., Wicaksana, F., and Fane, A. G. (2014). “Evaluation of fouling deposition, fouling reversibility and energy consumption of submerged hollow fiber membrane systems with periodic backwash.” J. Membr. Sci., 452, 319–331.
Ariza, M. J., and Benavente, J. (2001). “Streaming potential along the surface of polysulfone membranes: A comparative study between two different experimental systems and determination of electrokinetic and adsorption parameters.” J. Membr. Sci., 190(1), 119–132.
Arnot, T. C., Field, R. W., and Koltuniewicz, A. B. (2000). “Cross-flow and dead-end microfiltration of oily-water emulsions: Part II. Mechanisms and modelling of flux decline.” J. Membr. Sci., 169(1), 1–15.
Bagga, A., Chellam, S., and Clifford, D. A. (2008). “Evaluation of iron chemical coagulation and electrocoagulation pretreatment for surface water microfiltration.” J. Membr. Sci., 309(1–2), 82–93.
Berube, P. R., Mavinic, D. S., Hall, E. R., Kenway, S. E., and Roett, K. (2002). “Evaluation of adsorption and coagulation as membrane pretreatment steps for the removal of organic material and disinfection-by-product precursors.” J. Environ. Eng. Sci., 1(6), 465–476.
Bolton, G., LaCasse, D., and Kuriyel, R. (2006). “Combined models of membrane fouling: Development and application to microfiltration and ultrafiltration of biological fluids.” J. Membr. Sci., 277(1–2), 75–84.
Carroll, T., King, S., Gray, S. R., Bolto, B. A., and Booker, N. A. (2000). “The fouling of microfiltration membranes by NOM after coagulation treatment.” Water Res., 34(11), 2861–2868.
Cho, J., Amy, G., and Pellegrino, J. (2000). “Membrane filtration of natural organic matter: Factors and mechanisms affecting rejection and flux decline with charged ultrafiltration (UF) membrane.” J. Membr. Sci., 164(1–2), 89–110.
Crozes, G. F., Jacangelo, J. G., Anselme, C., and Laine, J. M. (1997). “Impact of ultrafiltration operating conditions on membrane irreversible fouling.” J. Membr. Sci., 124(1), 63–76.
Diez, V., Ezquerra, D., Cabezas, J. L., García, A., and Ramos, C. (2014). “A modified method for evaluation of critical flux, fouling rate and in situ determination of resistance and compressibility in MBR under different fouling conditions.” J. Membr. Sci., 453, 1–11.
Edzwald, J. K. (1993). “Coagulation in drinking-water treatment: Particles, organics and coagulants.” Water Sci. Technol., 27(11), 21–35.
Edzwald, J. K., and Tobiason, J. E. (1999). “Enhanced coagulation: US requirements and a broader view.” Water Sci. Technol., 40(9), 63–70.
Guo, H. L., and Hu, J. Y. (2012). “Effect of hybrid coagulation-membrane filtration on downstream UV disinfection.” Desalination, 290, 115–124.
Hofs, B., Ogier, J., Vries, D., Beerendonk, E. F., and Cornelissen, E. R. (2011). “Comparison of ceramic and polymeric membrane permeability and fouling using surface water.” Sep. Purif. Technol., 79(3), 365–374.
Howe, K. J., and Clark, M. M. (2006). “Effect of coagulation pretreatment on membrane filtration performance.” J. Am. Water Works Assoc., 98(4), 133–146.
Howe, K. J., Marwah, A., Chiu, K. P., and Adham, S. S. (2006). “Effect of coagulation on the size of MF and MF membrane foulants.” Environ. Sci. Technol., 40(24), 7908–7913.
Hu, J., Song, H., Addison, J. W., and Karanfil, T. (2010). “Halonitromethane formation potentials in drinking waters.” Water Res., 44(1), 105–114.
Huang, H., Schwab, K., and Jacangelo, J. G. (2009). “Pretreatment for low pressure membranes in water treatment: A review.” Environ. Sci. Technol., 43(9), 3011–3019.
Jones, K. L., and O’Melia, C. R. (2000). “Protein and humic acid adsorption onto hydrophilic membrane surfaces: Effects of pH and ionic strength.” J. Membr. Sci., 165(1), 31–46.
Karanfil, T., Schlautman, M. A., Kilduff, J. E., and Weber, W. J. (1996). “Adsorption of organic macromolecules by granular activated carbon. 2. Influence of dissolved oxygen.” Environ. Sci. Technol., 30(7), 2195–2201.
Kim, K. S., Lee, K. H., Cho, K., and Park, C. E. (2002). “Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment.” J. Membr. Sci., 199(1–2), 135–145.
Kwon, B., Lee, S., Cho, J., Ahn, H., Lee, D., and Shin, H. S. (2005). “Biodegradability, DBP formation, and membrane fouling potential of natural organic matter: Characterization and controllability.” Environ. Sci. Technol., 39(3), 732–739.
LabVIEW [Computer software]. Austin, TX, National Instrutments.
Lee, E. K., Chen, V., and Fane, A. G. (2008). “Natural organic matter (NOM) fouling in low pressure membrane filtration—Effect of membranes and operation modes.” Desalination, 218(1–3), 257–270.
Lee, J. D., Lee, S. H., Jo, M. H., Park, P. K., Lee, C. H., and Kwak, J. W. (2000). “Effect of coagulation conditions on membrane filtration characteristics in coagulation-microfiltration process for water treatment.” Environ. Sci. Technol., 34(17), 3780–3788.
Lee, S.-J., Dilaver, M., Park, P.-K., and Kim, J.-H. (2013). “Comparative analysis of fouling characteristics of ceramic and polymeric microfiltration membranes using filtration models.” J. Membr. Sci., 432, 97–105.
Lee, S.-J., and Kim, J.-H. (2014). “Differential natural organic matter fouling of ceramic versus polymeric ultrafiltration membranes.” Water Res., 48, 43–51.
Lee, Y. G., Lee, Y. S., Kim, D. Y., Park, M., Yang, D. R., and Kim, J. H. (2012). “A fouling model for simulating long-term performance of SWRO desalination process.” J. Membr. Sci., 401–402, 282–291.
Lehman, S. G., Adham, S., and Liu, L. (2008). “Performance of new generation ceramic membranes using hybrid coagulation pretreatment.” J. Environ. Eng. Manage., 18(4), 257–260.
Li, M., Wu, G., Guan, Y., and Zhang, X. (2011). “Treatment of river water by a hybrid coagulation and ceramic membrane process.” Desalination, 280(1–3), 114–119.
Loi-Brügger, A., et al. (2006). “Ceramic membranes for direct river water treatment applying coagulation and microfiltration.” Water Sci. Technol. Water Supply, 6(4), 89–98.
Matsui, Y., et al. (2003). “Virus inactivation in aluminum and polyaluminum coagulation.” Environ. Sci. Technol., 37(22), 5175–5180.
Mo, L., and Huang, X. (2003). “Fouling characteristics and cleaning strategies in a coagulation-microfiltration combination process for water purification.” Desalination, 159(1), 1–9.
Shah, A. D., Dotson, A. D., Linden, K. G., and Mitch, W. A. (2011). “Impact of UV disinfection combined with chlorination/chloramination on the formation of halonitromethanes and haloacetonitriles in drinking water.” Environ. Sci. Technol., 45(8), 3657–3664.
Shao, J., Hou, J., and Song, H. (2011). “Comparison of humic acid rejection and flux decline during filtration with negatively charged and uncharged ultrafiltration membranes.” Water Res., 45(2), 473–482.
Sondhi, R., and Bhave, R. (2001). “Role of backpulsing in fouling minimization in crossflow filtration with ceramic membranes.” J. Membr. Sci., 186(1), 41–52.
Tabatabai, S. A. A., Gaulinger, S. I., Kennedy, M. D., Amy, G. L., and Schippers, J. C. (2009). “Optimization of inline coagulation in integrated membrane systems: A study of FeCl3.” Desalin. Water Treat., 10(1–3), 121–127.
Taniguchi, M., Kilduff, J. E., and Belfort, G. (2003). “Modes of natural organic matter fouling during ultrafiltration.” Environ. Sci. Technol., 37(8), 1676–1683.
Wan, M. W., Futalan, C. M., Chang, C. H., and Kan, C. C. (2012). “Effect of coagulation mechanisms on the fouling and ultrasonic cleaning of PTFE membrane.” Water Sci. Technol., 66(11), 2291–2298.
Yonekawa, H., Tomita, Y., and Watanabe, Y. (2004). “Behavior of micro-particles in monolith ceramic membrane filtration with pre-coagulation.” Water Sci. Technol., 50(12), 317–325.
Zhang, M. M., Li, C., Benjamin, M. M., and Chang, Y. J. (2003). “Fouling and natural organic matter removal in adsorben/membrane systems for drinking water treatment.” Environ. Sci. Technol., 37(8), 1663–1669.
Zhao, Y. J., Xing, W. H., Xu, N. P., and Wong, F. S. (2005). “Effects of inorganic electrolytes on zeta potentials of ceramic microfiltration membranes.” Sep. Purif. Technol., 42(2), 117–121.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 141 • Issue 5 • May 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 24, 2014
Accepted: Oct 16, 2014
Published online: Nov 20, 2014
Discussion open until: Apr 20, 2015
Published in print: May 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.