Effect of Cold Temperatures on Performance of Concrete under Impact Loading
Publication: Journal of Cold Regions Engineering
Volume 34, Issue 3
Abstract
This study investigated the effect of cold temperatures on impact resistance and mechanical properties of a number of self-consolidating and vibrated concretes. Different mixture compositions were developed and tested under compression, four-point bending, and drop-weight impact loading. All tests were conducted at four different temperatures: +20°C, 0°C, −10°C, and −20°C. The studied variables were supplementary cementing materials (SCMs) [including fly ash (FA), slag (SL), silica fume (SF), and metakaolin (MK)]; the nominal maximum coarse aggregate size (10 and 20 mm), coarse-to-fine (C/F) aggregate ratio (0.7 and 2), and binder content (250 and 500 kg/m3). In addition, 35-mm steel fibers were introduced in one self-consolidating concrete (SCC) mixture for comparison. The experimental results indicated that the compressive strength, flexural strength, and impact resistance of all developed mixtures were generally improved as the temperature decreased. These improvements were more pronounced in mixtures with a relatively low binder content of 250 kg/m3 and mixtures with a higher C/F aggregate ratio. On the other hand, the lowest improvements were observed in higher strength mixtures and mixtures with more reactive SCMs such as SF or MK. Colder temperatures also boosted the role of fibers in improving the flexural strength and impact resistance of concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the NSERC CRD for sponsoring this work as part of a larger research project.
References
Abouhussien, A. A., and A. A. A. Hassan. 2014. “Application of statistical analysis for mixture design of high-strength self-consolidating concrete containing metakaolin.” J. Mater. Civ. Eng. 26 (6): 04014016. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000944.
ACI (American Concrete Institute). 1999. Measurement of properties of fiber reinforced concrete. ACI 544.2R-89. West Conshohocken, PA: ACI.
ASTM. 2010. Standard test method for flexural strength of concrete (using simple beam with third-point loading). ASTM C78. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M. West Conshohocken, PA: ASTM.
ASTM. 2012a. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard specification for Portland cement. ASTM C150/C150M. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard specification for chemical admixtures for concrete. ASTM C494/C494. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard specification for slag cement for use in concrete and mortars. ASTM C989/C989M. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard specification for silica fume used in cementitious mixtures. ASTM C1240. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for slump of hydraulic-cement concrete. ASTM C143/C143M. West Conshohocken, PA: ASTM.
Atis, C. D., and O. Karahan. 2009. “Properties of steel fiber reinforced fly ash concrete.” Constr. Build. Mater. 23 (1): 392–399. https://doi.org/10.1016/j.conbuildmat.2007.11.002.
Berry, M., J. Johnson, and K. McDevitt. 2017. “Effect of cold temperatures on the behavior and ultimate capacity of GFRP-reinforced concrete beams.” Cold Reg. Sci. Technol. 136: 9–16. https://doi.org/10.1016/j.coldregions.2017.01.003.
Cai, X. P., W. C. Yang, J. Yuan, Y. Ge, and B. S. Zhang. 2011. “Effect of low temperature on mechanical properties of concrete with different strength grade.” Key Eng. Mater. 477: 308–312. https://doi.org/10.4028/www.scientific.net/KEM.477.308.
Chen, Y., and I. M. May. 2009. “Reinforced concrete members under drop-weight impacts.” Proc. Inst. Civ. Eng. Struct. Build. 162 (1): 45–56. https://doi.org/10.1680/stbu.2009.162.1.45.
Chung, C. W., S. C. Shon, and S. Y. Kim. 2010. “Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze–thaw cycles.” Constr. Build. Mater. 24 (9): 1739–1745. https://doi.org/10.1016/j.conbuildmat.2010.02.015.
EFNARC (European Federation for Specialist Construction Chemicals and Concrete Systems). 2005. The European guidelines for self-compacting concrete specification, production and use. English ed. Norfolk, UK: EFNARC.
Filiatrault, A., and M. Holleran. 2001. “Stress–strain behavior of reinforcing steel and concrete under seismic strain rates and low temperatures.” Mater. Struct. 34 (5): 235–239. https://doi.org/10.1007/BF02480594.
Gautier, D. L., et al. 2009. “Assessment of undiscovered oil and gas in the Arctic.” Science 324 (5931): 1175–1179. https://doi.org/10.1126/science.1169467.
Goto, Y., and T. Miura. 1979. “Experimental studies on properties of concrete cooled to about minus 160 °C.” Technol. Rep. Tohoku Univ. 44 (2): 357–385.
Hassan, A. A. A., M. K. Ismail, and J. Mayo. 2015. “Mechanical properties of self-consolidating concrete containing lightweight recycled aggregate in different mixture compositions.” J. Build. Eng. 4: 113–126. https://doi.org/10.1016/j.jobe.2015.09.005.
Hassan, A. A. A., M. Lachemi, and K. M. A. Hossain. 2012. “Effect of metakaolin and silica fume on the durability of self-consolidating concrete.” Cem. Concr. Compos. 34 (6): 801–807. https://doi.org/10.1016/j.cemconcomp.2012.02.013.
Hooton, R. D. 1993. “Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing and alkali-silica reactivity.” ACI Mater. J. 90 (2): 143–151.
Ismail, M. K., and A. A. A. Hassan. 2016. “Use of metakaolin on enhancing the mechanical properties of self-consolidating concrete containing high percentages of crumb rubber.” J. Cleaner Prod. 125: 282–295. https://doi.org/10.1016/j.jclepro.2016.03.044.
Ismail, M. K., and A. A. A. Hassan. 2017. “Use of steel fibers to optimize self-consolidating concrete mixtures containing crumb rubber.” ACI Mater. J. 114 (4): 581–594. https://doi.org/10.14359/51689714.
Ismail, M. K., A. A. A. Hassan, and M. Lachemi. 2018. “Effect of fiber type on impact and abrasion resistance of engineered cementitious composite.” ACI Mater. J. 115 (6): 957–968.
Ismail, M. K., A. A. A. Hassan, and M. Lachemi. 2019. “Performance of self-consolidating engineered cementitious composite under drop-weight impact loading.” J. Mater. Civ. Eng. 31 (3): 04018400. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002619.
Koehler, E. P., and D. W. Fowler. 2007. Aggregates in self-consolidating concrete. Research Rep. No. ICAR 108-2F. Alexandria, VA: Aggregates Foundation for Technology, Research and Education.
Larbi, J. A. 1993. Microstructure of the interfacial zone around aggregate particles in concrete. NASA STI/Recon Technical Rep. No. 94. Washington, DC: NASA.
Lee, G. C., T. S. Shih, and K. C. Chang. 1988. “Mechanical properties of concrete at low temperature.” J. Cold Reg. Eng. 2 (1): 13–24. https://doi.org/10.1061/(ASCE)0887-381X(1988)2:1(13).
Lok, T. S., and J. S. Pei. 1996. “Impact resistance and ductility of steel fibre reinforced concrete panels.” HKIE Trans. 3 (3): 7–16. https://doi.org/10.1080/1023697X.1996.10667703.
MacLean, T. J., and A. Lloyd. 2019. “Compressive stress–strain response of concrete exposed to low temperatures.” J. Cold Reg. Eng. 33 (4): 04019014. https://doi.org/10.1061/(ASCE)CR.1943-5495.0000199.
Madandoust, R., and S. Y. Mousavi. 2012. “Fresh and hardened properties of self-compacting concrete containing metakaolin.” Constr. Build. Mater. 35: 752–760. https://doi.org/10.1016/j.conbuildmat.2012.04.109.
Montejo, L. A., J. E. Sloan, M. J. Kowalsky, and T. Hassan. 2008. “Cyclic response of reinforced concrete members at low temperatures.” J. Cold Reg. Eng. 22 (3): 79–102. https://doi.org/10.1061/(ASCE)0887-381X(2008)22:3(79).
Ohlsson, U., P. A. Daerga, and L. Elfgren. 1990. “Fracture energy and fatigue strength of unreinforced concrete beams at normal and low temperatures.” Eng. Fract. Mech. 35 (1–3): 195–203. https://doi.org/10.1016/0013-7944(90)90197-O.
Olivito, R. S., and F. A. Zuccarello. 2010. “An experimental study on the tensile strength of steel fiber reinforced concrete.” Compos. Part B: Eng. 41 (3): 246–255. https://doi.org/10.1016/j.compositesb.2009.12.003.
Pigeon, M., and R. Cantin. 1998. “Flexural properties of steel fiber-reinforced concretes at low temperatures.” Cem. Concr. Compos. 20 (5): 365–375. https://doi.org/10.1016/S0958-9465(98)00017-1.
Pu, L., and C. Unluer. 2018. “Durability of carbonated MgO concrete containing fly ash and ground granulated blast-furnace slag.” Constr. Build. Mater. 192: 403–415. https://doi.org/10.1016/j.conbuildmat.2018.10.121.
Şahmaran, M., S. B. Keskin, G. Ozerkan, and I. O. Yaman. 2008. “Self-healing of mechanically-loaded self-consolidating concretes with high volumes of fly ash.” Cem. Concr. Compos. 30 (10): 872–879. https://doi.org/10.1016/j.cemconcomp.2008.07.001.
Singh, N., P. Kumar, and P. Goyal. 2019. “Reviewing the behaviour of high volume fly ash based self compacting concrete.” J. Build. Eng. 26: 100882. https://doi.org/10.1016/j.jobe.2019.100882.
Sloan, J. E. 2005. “The seismic behavior of reinforced concrete members at low temperature.” M.S. thesis, Dept. of Civil Construction and Environmental Engineering, North Carolina State Univ.
Verian, K. P., and A. Behnood. 2018. “Effects of deicers on the performance of concrete pavements containing air-cooled blast furnace slag and supplementary cementitious materials.” Cem. Concr. Compos. 90: 27–41. https://doi.org/10.1016/j.cemconcomp.2018.03.009.
Xie, J., X. Li, and H. Wu. 2014. “Experimental study on the axial-compression performance of concrete at cryogenic temperatures.” Constr. Build. Mater. 72: 380–388. https://doi.org/10.1016/j.conbuildmat.2014.09.033.
Xie, J., and J. B. Yan. 2017. “Experimental studies and analysis on compressive strength of normal-weight concrete at low temperatures.” Struct. Concr. 19 (4): 1235–1244. https://doi.org/10.1002/suco.201700009.
Yan, J. B., and J. Xie. 2017. “Behaviours of reinforced concrete beams under low temperatures.” Constr. Build. Mater. 141: 410–425. https://doi.org/10.1016/j.conbuildmat.2017.03.029.
Yang, L. H., Z. Han, and C. F. Li. 2011. “Strengths and flexural strain of CRC specimens at low temperature.” Constr. Build. Mater. 25 (2): 906–910. https://doi.org/10.1016/j.conbuildmat.2010.06.094.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Oct 28, 2019
Accepted: Apr 23, 2020
Published online: Jun 23, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 23, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.