Abstract
The quality of building products is vital for the safety of construction and building occupants. The application of off-site construction (OSC) has been increasing in the industry, one of the reasons being its potential for improving project quality. Yet, various quality problems have been reported, such as cracks and air pockets of prefabricated components, sleeve grouting noncompactness in key nodes, which hinders the development of the OSC sector. It is urgent to carry out quality control (QC) for OSC projects. Substantial research efforts have thus been devoted to these topics in recent decades, resulting in a certain amount of literature regarding QC for OSC. The objective of this study is to conduct a state-of-the-art review of QC for OSC projects to deeply understand its knowledge gaps and future research directions. An integrated review method was used to carry out bibliometric analysis and in-depth qualitative content analysis based on selecting targeted articles. Results show that the identified knowledge gaps include: (1) OSC lacks suitable QC rules, (2) QC means for OSC is out of date, (3) QC information technology for OSC is immature, and (4) existing limitation connotation of QC for OSC. Finally, based on the identified knowledge gaps, corresponding future research directions were suggested, including quality risk transmission control for OSC, supply chain quality management for OSC projects, BIM-based quality data management for OSC, blockchain technology and quality traceability for OSC, and performance and assessment model of QC for OSC. This research contributes to an in-depth and comprehensive understanding of QC for OSC, which offers valuable implications for the quality improvement of the OSC industry.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data generated or analyzed during the study are included in the published paper, and the basic data information is primarily listed in Tables 1–3.
Acknowledgments
The work was financially supported by the National Key R&D Program of China (Grant No. 2016YFC0701810 in 2016YFC0701800), the Fundamental Research Funds for the Central Universities in China (Grant No. 2019CDSKXYJSG0041).
References
Altaf, M. S., A. Bouferguene, H. X. Liu, M. Al-Hussein, and H. T. Yu. 2018. “Integrated production planning and control system for a panelized home prefabrication facility using simulation and RFID.” Autom. Constr. 85 (Jan): 369–383. https://doi.org/10.1016/j.autcon.2017.09.009.
Androwis, N., R. J. Sweis, A. Tarhini, A. Moarefi, and M. Hosseini Amiri. 2018. “Total quality management practices and organizational performance in the construction chemicals companies in Jordan.” Benchmarking 25 (8): 3180–3205. https://doi.org/10.1108/BIJ-05-2017-0094.
Arif, M., and C. Egbu. 2010. “Making a case for offsite construction in China.” Eng. Constr. Archit. Manage. 17 (6): 536–548. https://doi.org/10.1108/09699981011090170.
Ashokkumar, D. 2014. “Study of quality management in construction industry.” Int. J. Innov. Res. Sci. Eng. Technol. 3 (1): 36–43.
Azman, N. S., M. Z. Ramli, and M. H. Zawawi. 2018. “Factors affecting quality management of construction project using industrialized building system: A review.” Int. J. Eng. Technol. 7 (4): 307–311. https://doi.org/10.14419/ijet.v7i4.35.22751.
Barbeito, I., S. Zaragoza, J. Tarrío-Saavedra, and S. Naya. 2017. “Assessing thermal comfort and energy efficiency in buildings by statistical quality control for autocorrelated data.” Appl. Energy 190 (Dec): 1–17. https://doi.org/10.1016/j.apenergy.2016.12.100.
Basu, R. 2014. “Managing quality in projects: An empirical study.” Int. J. Project Manage. 32 (1): 178–187. https://doi.org/10.1016/j.ijproman.2013.02.003.
Blismas, N., M. Arif, and R. Wakefield. 2009. “Drivers, constraints and the future of offsite manufacture in Australia.” Constr. Innov. 9 (1): 72–83. https://doi.org/10.1108/14714170910931552.
Bortolini, R., C. T. Formoso, and D. D. Viana. 2019. “Site logistics planning and control for engineer-to-order prefabricated building systems using BIM 4D modeling.” Autom. Constr. 98 (11): 248–264. https://doi.org/10.1016/j.autcon.2018.11.031.
Bowden, S., A. Dorr, A. Thorpe, and C. J. Anumba. 2004. “Mapping site processes for the introduction of mobile IT.” ECPPM 4 (11): 491–498.
Brell-Cokcan, S., and E. Lublasser. 2016. “Novel technologies in the construction process for quality management in sustainable building production.” Bauingenieur 91 (Jul): 317–321.
Bull, K., J. J. Castro, and K. Nakada. 2018. “Quality control acceptance criteria improvements for pre-stressed high strength concrete pile driving operations in Japanese building construction.” J. Asian Archit. Build. Eng. 17 (3): 519–524. https://doi.org/10.3130/jaabe.17.519.
Butlin, J. 1989. “Our common future. By world commission on environment and development.” J. Int. Dev. 1 (2): 284–287. https://doi.org/10.1002/jid.3380010208.
Cai, B. 2010. ISO 9000 quality management system. Norwalk, CT: Mechanical Industry Press.
Carvajal-Arango, D., S. Bahamón-Jaramillo, P. Aristizábal-Monsalve, A. Vásquez-Hernández, and L. F. B. Botero. 2019. “Relationships between lean and sustainable construction: Positive impacts of lean practices over sustainability during construction phase.” J. Cleaner Prod. 234 (May): 1322–1337. https://doi.org/10.1016/j.jclepro.2019.05.216.
Chahal, K. S., and P. Emerson. 2007. “Quality control and quality assurance in building design and construction.” J. Inst. Eng. India: Archit. Eng. Div. 88 (29): 16–20.
Chen, C. 2017. “Science mapping: A systematic review of the literature.” J. Data Inf. Sci. 2 (2): 1–40. https://doi.org/10.1515/jdis-2017-0006.
Chen, L., and H. Luo. 2014. “A BIM-based construction quality management model and its applications.” Autom. Constr. 46 (5): 64–73. https://doi.org/10.1016/j.autcon.2014.05.009.
Chen, W., X. J. Sun, Z. H. Wang, R. L. Chen, and H. Li. 2020. “SD model of quality chain management and control of prefabricated building components.” J. Civ. Eng. Manage. 37 (6): 14–20. https://doi.org/10.13579/j.cnki.2095-0985.2020.06.003.
Cheng, Y., Y. Chen, R. Wei, and H. Luo. 2015. “Development of a construction quality supervision collaboration system based on a SAAS private cloud.” J. Intell. Rob. Syst. 79 (3–4): 613–627. https://doi.org/10.1007/s10846-014-0108-8.
Chin, S., K. Kim, and Y.-S. Kim. 2004. “A process-based quality management information system.” Autom. Constr. 13 (2): 241–259. https://doi.org/10.1016/j.autcon.2003.08.010.
Colicchia, C., R. Wilding, and F. Strozzi. 2012. “Supply chain risk management: A new methodology for a systematic literature review.” Supply Chain Manage. Int. J. 17 (4): 403–418. https://doi.org/10.1108/13598541211246558.
Corona-Suárez, G. A., S. M. Abourizk, and S. Karapetrovic. 2014. “Simulation-based fuzzy logic approach to assessing the effect of project quality management on construction performance.” J. Qual. Reliab. Eng. 2014 (1): 1–24. https://doi.org/10.1155/2014/203427.
Čuš-Babič, N., D. Rebolj, M. Nekrep-Perc, and P. Podbreznik. 2014. “Supply-chain transparency within industrialized construction projects.” Comput. Indus. 65 (2): 345–353. https://doi.org/10.1016/j.compind.2013.12.003.
Dong, R. R. 2017. “The application of BIM technology in building construction quality management and talent training.” Eurasia J. Math. Sci. Technol. Educ. 13 (7): 4311–4317. https://doi.org/10.12973/eurasia.2017.00860a.
Gan, X., R. Chang, J. Zuo, T. Wen, and G. Zillante. 2018a. “Barriers to the transition towards off-site construction in China: An interpretive structural modeling approach.” J. Cleaner Prod. 197 (May): 8–18. https://doi.org/10.1016/j.jclepro.2018.06.184.
Gan, X. L., R. D. Chang, C. Langston, and T. Wen. 2019. “Exploring the interactions among factors impeding the diffusion of prefabricated building technologies fuzzy cognitive maps.” Eng. Constr. Archit. Manage. 26 (3): 535–553. https://doi.org/10.1108/ECAM-05-2018-0198.
Gan, X. L., R. D. Chang, and T. Wen. 2018b. “Overcoming barriers to off-site construction through engaging stakeholders: A two-mode social network analysis.” J. Cleaner Prod. 201 (7): 735–747. https://doi.org/10.1016/j.jclepro.2018.07.299.
Gan, Y., L. Shen, J. Chen, V. W. Y. Tam, Y. Tan, and I. Illankoon. 2017. “Critical factors affecting the quality of industrialized building system projects in China.” Sustainability 9 (2): 216. https://doi.org/10.3390/su9020216.
Garg, A., and V. R. Kamat. 2014. “Virtual prototyping for robotic fabrication of rebar cages in manufactured concrete construction.” J. Archit. Eng. 20 (1): 06013002. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000134.
Gransberg, D. D., and K. Molenaar. 2004. “Analysis of owner’s design and construction quality management approaches in design/build projects.” J. Manage. Eng. 20 (4): 162–169. https://doi.org/10.1061/(ASCE)0742-597X(2004)20:4(162).
Hong, J., Y. Liao, Y. Zhang, and Z. Yu. 2019. “The effect of supply chain quality management practices and capabilities on operational and innovation performance: Evidence from Chinese manufacturers.” Int. J. Prod. Econ. 212 (Jan): 227–235. https://doi.org/10.1016/j.ijpe.2019.01.036.
Hong, J. K., G. Q. P. Shen, Z. D. Li, B. Y. Zhang, and W. Q. Zhang. 2018. “Barriers to promoting prefabricated construction in China: A cost-benefit analysis.” J. Cleaner Prod. 172 (Jan): 649–660. https://doi.org/10.1016/j.jclepro.2017.10.171.
Hosseini, M. R., I. Martek, E. K. Zavadskas, A. A. Aibinu, M. Arashpour, and N. Chileshe. 2018. “Critical evaluation of off-site construction research: A scientometric analysis.” Autom. Constr. 87 (12): 235–247. https://doi.org/10.1016/j.autcon.2017.12.002.
Huang, H. Z. 2019. “Research on quality chain management of prefabricated buildings.” Constr. Econ. 40 (9): 90–94. https://doi.org/10.14181/j.cnki.1002-851x.201909090.
Hutchinson, T. C., and Z. J. Chen. 2006. “Improved image analysis for evaluating concrete damage.” J. Comput. Civ. Eng. 20 (3): 210–216. https://doi.org/10.1061/(ASCE)0887-3801(2006)20:3(210).
Jaillon, L., and C. S. Poon. 2010. “Design issues of using prefabrication in Hong Kong building construction.” Construct. Manage. Econ. 28 (10): 1025–1042. https://doi.org/10.1080/01446193.2010.498481.
Jang, S., and G. Lee. 2018. “Process, productivity, and economic analyses of BIM based multi-trade prefabrication—A case study.” Autom. Constr. 89 (Dec): 86–98. https://doi.org/10.1016/j.autcon.2017.12.035.
Ji, Y., L. Qi, Y. Liu, X. Liu, H. Li, and Y. Li. 2018a. “Assessing and prioritising delay factors of prefabricated concrete building projects in China.” Appl. Sci. 8 (11): 2324. https://doi.org/10.3390/app8112324.
Ji, Y. B., K. J. Li, G. W. Liu, A. Shrestha, and J. X. Jing. 2018b. “Comparing greenhouse gas emissions of precast in-situ and conventional construction methods.” J. Cleaner Prod. 173 (Feb): 124–134. https://doi.org/10.1016/j.jclepro.2016.07.143.
Ji, Y. B., X. S. Wang, Y. Qi, F. Y. Yao, and Y. W. Wang. 2015. “Research on the technology integration of building industrialization based on BIM technology.” In Proc., 2015 Int. Conf. on Applied Science and Engineering Innovation, 364–371. Paris: Atlantis Press.
Jiang, S., and W. Cai. 2018. “Ultrasonic testing method of grouting sleeve compactness.” J. Vib. Shock 37 (10): 43–49. https://doi.org/10.13465/j.cnki.jvs.2018.10.007.
Jin, R. Y., S. Gao, A. Cheshmehzangi, and E. Aboagye-Nimo. 2018. “A holistic review of off-site construction literature published between 2008 and 2018.” J. Cleaner Prod. 202 (195): 1202–1219. https://doi.org/10.1016/j.jclepro.2018.08.195.
Johnsson, H., and J. H. Meiling. 2009. “Defects in offsite construction: Timber module prefabrication.” Construct. Manage. Econ. 27 (7): 667–681. https://doi.org/10.1080/01446190903002797.
Kamali, M., and K. Hewage. 2016. “Life cycle performance of modular buildings: A critical review.” Renewable Sustainable Energy Rev. 62 (31): 1171–1183. https://doi.org/10.1016/j.rser.2016.05.031.
Kamali, M., K. Hewage, and A. S. Milani. 2018. “Life cycle sustainability performance assessment framework for residential modular buildings: Aggregated sustainability indices.” Build. Environ. 138 (4): 21–41. https://doi.org/10.1016/j.buildenv.2018.04.019.
Kim, M. K., Q. Wang, S. Yoon, and H. Sohn. 2019. “A mirror-aided laser scanning system for geometric quality inspection of side surfaces of precast concrete elements.” Measurement 141 (4): 420–428. https://doi.org/10.1016/j.measurement.2019.04.060.
Kim, M.-K., H. Sohn, and C.-C. Chang. 2014. “Automated dimensional quality assessment of precast concrete panels using terrestrial laser scanning.” Autom. Constr. 45 (5): 163–177. https://doi.org/10.1016/j.autcon.2014.05.015.
Knyziak, P. 2016. “The quality and reliability in the structural design, production, execution and maintenance of the precast residential buildings in Poland in the past and now.” Key Eng. Mater. 691 (98): 420–431. https://doi.org/10.4028/www.scientific.net/KEM.691.420.
Knyziak, P. 2019. “The impact of construction quality on the safety of prefabricated multi-family dwellings.” Eng. Fail. Anal. 100 (2): 37–48. https://doi.org/10.1016/j.engfailanal.2019.02.042.
Laefer, D. F., M. Fitzgerald, E. M. Maloney, D. Coyne, D. Lennon, and S. W. Morrish. 2009. “Lateral image degradation in terrestrial laser scanning.” 19 (2): 184–189. https://doi.org/10.2749/101686609788220196.
Li, C. Z. D., R. Y. Zhong, F. Xue, G. Y. Xu, K. Chen, G. G. Q. Huang, and G. Q. P. Shen. 2017. “Integrating RFID and BIM technologies for mitigating risks and improving schedule performance of prefabricated house construction.” J. Cleaner Prod. 165 (7): 1048–1062. https://doi.org/10.1016/j.jclepro.2017.07.156.
Li, D., and H. Liu. 2019. “Detection of sleeve grouting connection defects in fabricated structural joints based on ultrasonic guided waves.” Smart Mater. Struct. 28 (8): 085033. https://doi.org/10.1088/1361-665X/ab29b0.
Li, X., R. Gao, Q. Xu, Z. Wang, F. Zhang, and Y. Xie. 2018. “Study on inspection technology for sleeve grouting connection quality of precast shear wall based on X-ray digital radiography method.” Build. Struct. 48 (7): 58–61. https://doi.org/10.19701/j.jzjg.2018.07.011.
Li, X., G. Q. Shen, P. Wu, and T. Yue. 2019. “Integrating building information modeling and prefabrication housing production.” Autom. Constr. 100 (12): 46–60. https://doi.org/10.1016/j.autcon.2018.12.024.
Li, Z. D., G. Q. Shen, and X. L. Xue. 2014. “Critical review of the research on the management of prefabricated construction.” Habitat Int. 43 (4): 240–249. https://doi.org/10.1016/j.habitatint.2014.04.001.
Liu, H., X. Li, and Q. Xu. 2017. “Test on detection of grouting compactness of grout sleeve by impact-echo method.” Non-Destr. Test. 39 (4): 12–16. https://doi.org/10.11973/wsjc201704003.
Ma, Y., S. Li, Y. Wu, D. Wang, and M. Liu. 2019. “Acoustic emission testing method for the sleeve grouting compactness of fabricated structure.” Constr. Build. Mater. 221 (Jun): 800–810. https://doi.org/10.1016/j.conbuildmat.2019.06.124.
Mao, C., Q. P. Shen, W. Pan, and K. H. Ye. 2015. “Major barriers to off-site construction: The developer’s perspective in China.” J. Manage. Eng. 31 (3): 8. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000246.
Meijer, F., and H. Visscher. 2017. “Quality control of constructions: European trends and developments.” Int. J. Law Built. Environ. 9 (2): 143–161. https://doi.org/10.1108/IJLBE-02-2017-0003.
Miaozhong, X., and Z. Yixuan. 2001. “Techniques of 3d component database establishing and quality control for wooden building.” Geo-Spatial Inf. Sci. 4 (3): 73–77. https://doi.org/10.1007/BF02826928.
Moaveni, S., S. Y. Banihashemi, and M. Mojtahedi. 2019. “A conceptual model for a safety-based theory of lean construction.” Buildings 9 (1): 23. https://doi.org/10.3390/buildings9010023.
Nahmens, I., and L. H. Ikuma. 2012. “Effects of lean construction on sustainability of modular homebuilding.” J. Archit. Eng. 18 (2): 155–163. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000054.
Nguyen, P. T., K. D. Vo, P. T. Phan, V. D. B. Huynh, T. A. Nguyen, T. M. Cao, and Q. L. Nguyen. 2018. “Construction project quality management using building information modeling 360 field.” Int. J. Adv. Comput. Sci. Appl. 9 (10): 228–233. https://doi.org/10.14569/IJACSA.2018.091028.
Pheng, L. S., and S. H. Hong. 2005. “Strategic quality management for the construction industry.” TQM Mag. 17 (1): 35–53. https://doi.org/10.1108/09544780510573048.
Puri, N., and Y. Turkan. 2017. “Toward automated dimensional quality control of precast concrete elements using design BIM.” WIT Trans. Built Environ. 169 (1): 203–210. https://doi.org/10.2495/bim170191.
Qi, Y., S. Chang, Y. Ji, and K. Qi. 2018. “BIM-based incremental cost analysis method of prefabricated buildings in China.” Sustainability 10 (11): 4293. https://doi.org/10.3390/su10114293.
Rousseau, D. M., J. Manning, and D. Denyer. 2008. “Evidence in management and organizational science: Assembling the field’s full weight of scientific knowledge through syntheses.” Acad. Manage. Ann. 2 (51): 475–515. https://doi.org/10.5465/19416520802211651.
Sabharwal, A., M. Syal, and M. Hastak. 2009. “Impact of manufactured housing component assembly redesign on facility layout and production process.” Constr. Innov. 9 (1): 58–71. https://doi.org/10.1108/14714170910931543.
Silva, L. P., J. Y. Ruwanpura, and K. N. Hewage. 2009. “Virtual supervision in construction projects.” In Proc., ASCE Construction Research Congress, 487–496. Reston, VA: ASCE.
Sonego, M., M. E. Soares Echeveste, and H. G. Debarba. 2018. “The role of modularity in sustainable design: A systematic review.” J. Cleaner Prod. 176 (12): 196–209. https://doi.org/10.1016/j.jclepro.2017.12.106.
Su, H.-N., and P.-C. Lee. 2010. “Mapping knowledge structure by keyword co-occurrence: A first look at journal papers in technology foresight.” Scientometrics 85 (1): 65–79. https://doi.org/10.1007/s11192-010-0259-8.
Tam, V. W. Y., I. W. H. Fung, M. C. P. Sing, and S. O. Ogunlana. 2015. “Best practice of prefabrication implementation in the Hong Kong public and private sectors.” J. Cleaner Prod. 109 (Dec): 216–231. https://doi.org/10.1016/j.jclepro.2014.09.045.
Tam, V. W. Y., C. M. Tam, S. X. Zeng, and W. C. Y. Ng. 2007. “Towards adoption of prefabrication in construction.” Build. Environ. 42 (10): 3642–3654. https://doi.org/10.1016/j.buildenv.2006.10.003.
Tan, T., K. Chen, F. Xue, and W. Lu. 2019. “Barriers to building information modeling (BIM) implementation in China’s prefabricated construction: An interpretive structural modeling (ISM) approach.” J. Cleaner Prod. 219 (Feb): 949–959. https://doi.org/10.1016/j.jclepro.2019.02.141.
Tao, X. Y., C. Mao, F. Y. Xie, G. W. Liu, and P. P. Xu. 2018. “Greenhouse gas emission monitoring system for manufacturing prefabricated components.” Autom. Constr. 93 (May): 361–374. https://doi.org/10.1016/j.autcon.2018.05.015.
Turner, J. R. 2009. The handbook of project-based management. New York: McGraw-Hill Companies.
Vaha, P., T. Heikkila, P. Kilpelainen, M. Jarviluoma, and E. Gambao. 2013. “Extending automation of building construction—Survey on potential sensor technologies and robotic applications.” Autom. Constr. 36 (Jan): 168–178. https://doi.org/10.1016/j.autcon.2013.08.002.
van Eck, N., and L. J. S. Waltman. 2009. “Software survey: VOSviewer, a computer program for bibliometric mapping.” Scientometrics 84 (2): 523–538. https://doi.org/10.1007/s11192-009-0146-3.
van Eck, N. J., and L. Waltman. 2014. “CitNetExplorer: A new software tool for analyzing and visualizing citation networks.” J. Inform. 8 (4): 802–823. https://doi.org/10.1016/j.joi.2014.07.006.
Wang, Q., J. C. P. Cheng, and H. Sohn. 2017. “Automated estimation of reinforced precast concrete rebar positions using colored laser scan data.” Comput.-Aided Civ. Infrastruct. Eng. 32 (9): 787–802. https://doi.org/10.1111/mice.12293.
Wang, Q., M.-K. Kim, J. C. P. Cheng, and H. Sohn. 2016. “Automated quality assessment of precast concrete elements with geometry irregularities using terrestrial laser scanning.” Autom. Constr. 68 (5): 170–182. https://doi.org/10.1016/j.autcon.2016.03.014.
Wang, Z., H. Hu, and J. Gong. 2018. “Simulation based multiple disturbances evaluation in the precast supply chain for improved disturbance prevention.” J. Cleaner Prod. 177 (Dec): 232–244. https://doi.org/10.1016/j.jclepro.2017.12.188.
Wang, Z., T. Wang, H. Hu, J. Gong, X. Ren, and Q. Xiao. 2020. “Blockchain-based framework for improving supply chain traceability and information sharing in precast construction.” Autom. Constr. 111 (Mar): 103063. https://doi.org/10.1016/j.autcon.2019.103063.
Wu, P., Y. D. Xu, R. Y. Jin, Q. Q. Lu, D. Madgwick, and C. M. Hancock. 2019. “Perceptions towards risks involved in off-site construction in the integrated design & construction project delivery.” J. Cleaner Prod. 213 (Mar): 899–914. https://doi.org/10.1016/j.jclepro.2018.12.226.
Yao, F., Y. Ji, W. Tong, H. X. Li, and G. Liu. 2021. “Sensing technology based quality control and warning systems for sleeve grouting of prefabricated buildings.” Autom. Constr. 123 (Mar): 103537. https://doi.org/10.1016/j.autcon.2020.103537.
Yin, X., H. Liu, Y. Chen, and M. Al-Hussein. 2019. “Building information modelling for off-site construction: Review and future directions.” Autom. Constr. 101 (May): 72–91. https://doi.org/10.1016/j.autcon.2019.01.010.
Yu, T., Q. Man, Y. Wang, G. Q. Shen, J. Hong, J. Zhang, and J. Zhong. 2019. “Evaluating different stakeholder impacts on the occurrence of quality defects in offsite construction projects: A Bayesian-network-based model.” J. Cleaner Prod. 241 (Sep): 118390. https://doi.org/10.1016/j.jclepro.2019.118390.
Zelinska, H., L. Boldyrieva, and I. Amelina. 2018. “Logistic quality management of transport process in construction.” Int. J. Eng. Technol. 7 (3): 32–35. https://doi.org/10.14419/ijet.v7i3.2.14371.
Zeng, W., M. Y. K. Tse, and M. Tang. 2018. “Supply chain quality management: An investigation in the Chinese construction industry.” Intern. J. Eng. Bus. Manage. 10 (Nov): 1847979018810619. https://doi.org/10.1177/1847979018810619.
Zhang, H., H. Zheng, G. Li, and D. Zhang. 2015. “Study on the quality control index weight for main structure of assembled steel residential buildings.” Shenyang Jianzhu Daxe Xuebao 31 (3): 485–491. https://doi.org/10.11717/j.issn: 2095-1922.2015.03.13.
Zhang, X. L., M. Skitmore, and Y. Peng. 2014. “Exploring the challenges to industrialized residential building in China.” Habitat Int. 41 (Mar): 176–184. https://doi.org/10.1016/j.habitatint.2013.08.005.
Zhang, Z., Z. Yuan, G. Ni, H. Lin, and Y. Lu. 2020. “The quality traceability system for prefabricated buildings using blockchain: An integrated framework.” Front. Eng. Manage. 7 (4): 528–546. https://doi.org/10.1007/s42524-020-0127-z.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 148 • Issue 8 • August 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Published online: Jun 6, 2022
Published in print: Aug 1, 2022
Discussion open until: Nov 6, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Seung Ho Song, Jin Ouk Choi, Hunhee Cho, Transportation-Induced Impact on a Prefinished Volumetric Modular House Using Trailer Bogie: Case Study, Journal of Construction Engineering and Management, 10.1061/JCEMD4.COENG-14567, 150, 7, (2024).
- Clyde Zhengdao Li, Shu Wen, Wen Yi, Hengqin Wu, Vivian W. Y. Tam, Offsite Construction Supply Chain Challenges: An Integrated Overview, Journal of Construction Engineering and Management, 10.1061/JCEMD4.COENG-14444, 150, 7, (2024).
- Ke Chen, Yunhan Zhang, Weili Fang, Tan Tan, Knowledge Engineering-Based Quality Management in Prefabricated Construction, ICCREM 2023, 10.1061/9780784485217.116, (1171-1179), (2023).
- Shulan Yang, Zhiwei Hou, Hongbo Chen, Network Model Analysis of Quality Control Factors of Prefabricated Buildings Based on the Complex Network Theory, Buildings, 10.3390/buildings12111874, 12, 11, (1874), (2022).