Fall Prevention from Scaffolding Using Computer Vision and IoT-Based Monitoring
Publication: Journal of Construction Engineering and Management
Volume 148, Issue 7
Abstract
Fall from height (FFH) is the most significant cause of occupational fatalities in the construction industry, accounting for approximately 54% of all accidents. Such fatalities have decreased considerably due to the use of personal protective equipment (PPE). However, the manual monitoring of compliance to PPE is complex and challenging for site managers. Automation in construction safety presents multiple solutions for monitoring safety at sites. In this study, a smart safety hook (SSH) monitoring method is proposed to eliminate the risk associated with FFH accidents by integrating computer vision [closed-circuit TV (CCTV)-imagery] and Internet-of-Things (IoT)-based [inertial measurement unit (IMU)IMU and altimeter] monitoring technologies. The proposed monitoring approach is validated through five real-time scenarios: (1) attached to the scaffolding and (6 ft), (2) attached to the worker and , (3) unattached and , (4) , and (5) outside of the risk zone. The proposed technique aims to relieve the site manager’s or safety engineer’s workload by smartly and instantaneously alerting of workers’ unsafe behavior (via alarm, LED blinking, and bounding box on live camera feed). Moreover, the IoT-based hardware setup goes to low power to extend the battery life when there is no unsafe behavior. The experimental results demonstrate that the proposed solution exhibits more than 98% accuracy for real-time detection and classification. Furthermore, it can be extended to monitor several workers and their location data in the future.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Relevant data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2020R1A4A4078916) and by the Chung-Ang University Young Scientist Scholarship 2020.
References
Ammad, S., W. S. Alaloul, S. Saad, and A. H. Qureshi. 2021. “Personal protective equipment (PPE) usage in construction projects: A systematic review and smart PLS approach.” Ain Shams Eng. J. 12 (4): 3495–3507. https://doi.org/10.1016/j.asej.2021.04.001.
Anjum, S., R. Khalid, M. Khan, N. Khan, and C. Park. 2021. “A pull-reporting approach for floor opening detection using deep-learning on embedded devices.” In Proc., 38th Int. Symp. on Automation and Robotics in Construction. 395–402. https://doi.org/10.22260/ISARC2021/0055.
Asadzadeh, A., M. Arashpour, H. Li, T. Ngo, A. Bab-Hadiashar, and A. Rashidi. 2020. “Sensor-based safety management.” Autom. Constr. 113 (May): 103128. https://doi.org/10.1016/j.autcon.2020.103128.
Awolusi, I., E. Marks, and M. Hallowell. 2018. “Wearable technology for personalized construction safety monitoring and trending: Review of applicable devices.” Autom. Constr. 85 (Jan): 96–106. https://doi.org/10.1016/j.autcon.2017.10.010.
Bangaru, S. S., C. Wang, S. A. Busam, and F. Aghazadeh. 2021. “ANN-based automated scaffold builder activity recognition through wearable EMG and IMU sensors.” Autom. Constr. 126 (Jun): 103653. https://doi.org/10.1016/j.autcon.2021.103653.
Bosch. 2013. Datasheet BMP180 digital pressure sensor. Gerlingen, Germany: Bosch Company.
Bureau of Labor Statistics. 2017. “U.S. Department of Labor, the economics daily, fatal work-related falls to a lower level increased 26 Percent from 2011 to 2016.” Accessed May 3, 2021. https://www.bls.gov/opub/mlr/2017/home.htm.
Bureau of Labor Statistics. 2018. “Fatal work-related falls to a lower level increased 26 percent from 2011 to 2016.” Accessed May 3, 2021. https://www.bls.gov/opub/ted/2018/fatal-work-related-falls-to-a-lower-level-increased-26-percent-from-2011-to-2016.htm.
Bureau of Labor Statistics. 2019. 2019 industrial accidents occurrence status. Washington, DC: Bureau of Labor Statistics.
Chansik, P., L. Doyeop, and K. Numan. 2020. “An Analysis on safety risk judgment patterns towards computer vision based construction safety management.” In Proc., Creative Construction e-Conference 2020, 31–38. Budapest, Hungary: Budapest Univ. of Technology. https://doi.org/10.3311/ccc2020-052.
Ding, L., W. Fang, H. Luo, P. E. D. Love, B. Zhong, and X. Ouyang. 2018. “A deep hybrid learning model to detect unsafe behavior: Integrating convolution neural networks and long short-term memory.” Autom. Constr. 86 (Feb): 118–124. https://doi.org/10.1016/j.autcon.2017.11.002.
Fabiano, B., F. Currò, A. P. Reverberi, and R. Pastorino. 2008. “A statistical study on temporary work and occupational accidents: Specific risk factors and risk management strategies.” Saf. Sci. 46 (3): 535–544. https://doi.org/10.1016/j.ssci.2007.05.004.
Fang, Q., H. Li, X. Luo, L. Ding, H. Luo, and C. Li. 2018a. “Computer vision aided inspection on falling prevention measures for steeplejacks in an aerial environment.” Autom. Constr. 93 (May): 148–164. https://doi.org/10.1016/j.autcon.2018.05.022.
Fang, W., L. Ding, P. E. D. Love, H. Luo, H. Li, F. Peña-Mora, B. Zhong, and C. Zhou. 2020. “Computer vision applications in construction safety assurance.” Autom. Constr. 110 (Feb): 103013. https://doi.org/10.1016/j.autcon.2019.103013.
Fang, W., L. Ding, H. Luo, and P. E. D. Love. 2018b. “Falls from heights: A computer vision-based approach for safety harness detection.” Autom. Constr. 91 (Jul): 53–61. https://doi.org/10.1016/j.autcon.2018.02.018.
Fang, W., B. Zhong, N. Zhao, P. E. D. Love, H. Luo, J. Xue, and S. Xu. 2019. “A deep learning-based approach for mitigating falls from height with computer vision: Convolutional neural network.” Adv. Eng. Inf. 39 (Jan): 170–177. https://doi.org/10.1016/j.aei.2018.12.005.
Golparvar-Fard, M., F. Peña-Mora, and S. Savarese. 2015. “Automated progress monitoring using unordered daily construction photographs and IFC-based building information models.” J. Comput. Civ. Eng. 29 (1): 04014025. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000205.
Guo, B. H. W., Y. Zou, Y. Fang, Y. Miang, and P. X. W. Zou. 2021. “Computer vision technologies for safety science and management in construction: A critical review and future research directions.” Saf. Sci. 135 (Mar): 105130. https://doi.org/10.1016/j.ssci.2020.105130.
Hanapi, N. M., M. M. M. Kamal, M. I. Ismail, and I. A. P. Abdullah. 2013. “Identifying root causes and mitigation measures of construction fall accidents.” Gading Bus. Manage. J. 17 (1): 65–79.
Health and Safety Executive. 2021. “U.K. fatal injuries arising from accidents at work in Great Britain: Headline results 2019/20.” Accessed May 3, 2021. http://www.hse.gov.uk/statistics/fatals.htm.
Heidari, A., S. Olbina, and S. Glick. 2021. “Automated positioning of anchors for personal fall arrest systems for steep-sloped roofs.” Buildings 11 (1): 1–26. https://doi.org/10.3390/buildings11010010.
Helen Lingard, S. M. R. 2005. Occupational health and safety in construction project management. London: Routledge.
Hinze, J., M. Hallowell, and K. Baud. 2013. “Construction-safety best practices and relationships to safety performance.” J. Constr. Eng. Manage. 139 (10): 04013006. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000751.
Huang, X., and J. Hinze. 2003. “Analysis of construction worker fall accidents.” J. Constr. Eng. Manage. 129 (3): 262–271. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:3(262).
Jebelli, H., C. R. Ahn, and T. L. Stentz. 2016. “Fall risk analysis of construction workers using inertial measurement units: Validating the usefulness of the postural stability metrics in construction.” Saf. Sci. 84 (Apr): 161–170. https://doi.org/10.1016/j.ssci.2015.12.012.
Jeon, S., S. Kim, S. Kang, and K. Kim. 2020. “Smart safety hook monitoring system for construction site.” In Proc., 2020 IEEE Int. Conf. on Consumer Electronics—Asia, ICCE—Asia 2020, 19–22. New York: IEEE. https://doi.org/10.1109/ICCE-Asia49877.2020.9277155.
Jin, R., H. Zhang, D. Liu, and X. Yan. 2020. “IoT-based detecting, locating and alarming of unauthorized intrusion on construction sites.” Autom. Constr. 118 (May): 103278. https://doi.org/10.1016/j.autcon.2020.103278.
JISHA (Japan Industrial Safety & Health Association). 2017. “Industrial accidents statistics in Japan.” Accessed May 3, 2021. https://www.jisha.or.jp/english/statistics/accidents_in_detail_2017.html.
Jo, B. W., Y. S. Lee, J. H. Kim, and R. M. A. Khan. 2017. “Trend analysis of construction industrial accidents in Korea from 2011 to 2015.” Sustainability 9 (8): 1297. https://doi.org/10.3390/su9081297.
Kang, Y., S. Siddiqui, S. J. Suk, S. Chi, and C. Kim. 2017. “Trends of fall accidents in the US construction industry.” J. Constr. Eng. Manage. 143 (8): 04017043. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001332.
Kaskutas, V., A. M. Dale, H. Lipscomb, and B. Evanoff. 2013. “Fall prevention and safety communication training for foremen: Report of a pilot project designed to improve residential construction safety.” J. Saf. Res. 44 (1): 111–118. https://doi.org/10.1016/j.jsr.2012.08.020.
Khan, M., R. Khalid, S. Anjum, N. Khan, and C. Park. 2021a. “IMU based smart safety hook for fall prevention at construction sites.” In Proc., IEEE Region 10 Symp. (TENSYMP), 1–6. New York: IEEE. https://doi.org/10.1109/TENSYMP52854.2021.9550944.
Khan, M. S., J. Park, and J. Seo. 2021b. “Geotechnical property modeling and construction safety zoning based on GIS and BIM integration.” Appl. Sci. 11 (9): 4004. https://doi.org/10.3390/app11094004.
Khan, N., M. Khan, S. Cho, and C. Park. 2021c. “Towards the adoption of vision intelligence for construction safety: Grounded theory methodology based safety regulations analysis.” In Proc., European Group for Intelligent Computing in Engineering (EG-ICE), 250–259. Berlin: Universitätsverlag der TU Berlin.
Kim, Y., H. Jung, B. Koo, J. Kim, T. Kim, and Y. Nam. 2020. “Detection of pre-impact falls from heights using an inertial measurement unit sensor.” Sensors 20 (18): 5388. https://doi.org/10.3390/s20185388.
Kines, P., and K. L. Mikkelsen. 2003. “Effects of firm size on risks and reporting of elevation fall injury in construction trades.” J. Occup. Environ. Med. 45 (10): 1074–1078. https://doi.org/10.1097/01.jom.0000085887.16564.3a.
Labour Dept. of Hong Kong. 2021. “Occupational safety and health statistics.” Accessed May 3, 2021. https://www.labour.gov.hk/eng/osh/content10.htm.
Levitt, R. E., and N. M. Samelson. 1993. Construction safety management. 2nd ed. New York: Wiley.
Liao, C. W., and Y. H. Perng. 2008. “Data mining for occupational injuries in the Taiwan construction industry.” Saf. Sci. 46 (7): 1091–1102. https://doi.org/10.1016/j.ssci.2007.04.007.
Lipscomb, H. J., A. L. Schoenfisch, W. Cameron, K. L. Kucera, D. Adams, and B. A. Silverstein. 2014. “How well are we controlling falls from height in construction? Experiences of union carpenters in Washington State, 1989–2008.” Am. J. Ind. Med. 57 (1): 69–77. https://doi.org/10.1002/ajim.22234.
Liu, W., D. Anguelov, D. Erhan, C. Szegedy, S. Reed, C.-Y. Fu, and A. C. Berg. 2016. “SSD: Single shot multibox detector.” In Computer science (including subseries lecture notes in artificial intelligence and lecture notes in bioinformatics): 9905 LNCS, 21–37. Cham, Switzerland: Springer.
Macedo, A. C., and I. L. Silva. 2005. “Analysis of occupational accidents in Portugal between 1992 and 2001.” Saf. Sci. 43 (5–6): 269–286. https://doi.org/10.1016/j.ssci.2005.06.004.
Marín, L. S., and C. Roelofs. 2017. “Promoting construction supervisors’ safety-efficacy to improve safety climate: Training intervention trial.” J. Constr. Eng. Manage. 143 (8): 04017037. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001330.
Mneymneh, B. E., M. Abbas, and H. Khoury. 2018. “Vision-based framework for intelligent monitoring of hardhat wearing on construction sites.” J. Comput. Civ. Eng. 33 (2): 04018066. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000813.
Nath, N. D., A. H. Behzadan, and S. G. Paal. 2020. “Deep learning for site safety: Real-time detection of personal protective equipment.” Autom. Constr. 112 (Apr): 103085. https://doi.org/10.1016/j.autcon.2020.103085.
Naticchia, B., M. Vaccarini, and A. Carbonari. 2013. “A monitoring system for real-time interference control on large construction sites.” Autom. Constr. 29 (Jan): 148–160. https://doi.org/10.1016/j.autcon.2012.09.016.
Navon, R., and O. Kolton. 2007. “Algorithms for automated monitoring and control of fall hazards.” J. Comput. Civ. Eng. 21 (1): 21–28. https://doi.org/10.1061/(ASCE)0887-3801(2007)21:1(21).
Nnaji, C., A. Jafarnejad, and J. Gambatese. 2020a. “Effects of wearable light systems on safety of highway construction workers.” Pract. Period. Struct. Des. Constr. 25 (2): 04020003. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000469.
Nnaji, C., I. Okpala, and I. Awolusi. 2020b. “Wearable sensing devices: Potential impact & current use for incident prevention.” Prof. Saf. 65 (4): 16–24.
Okpala, I., C. Nnaji, and A. A. Karakhan. 2020. “Utilizing emerging technologies for construction safety risk mitigation.” Pract. Period. Struct. Des. Constr. 25 (2): 04020002. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000468.
OSHA (Occupational Safety and Health Administration). 2015. Protecting roofing workers. Ithaca, NY: Cornell Univ.
OSHA (Occupational Safety and Health Administration). 2022. “Safety and health regulations for construction | 1926.502 – Fall protection systems criteria and practices.” Accessed November 11, 2021. https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.502#1926.502(f)(2).
Ranju Warrier. 2021. “Top causes of global construction fatalities, and how to avoid site risks.” Accessed May 3, 2021. https://www.constructionweekonline.com/people/training/255830-top-10-causes-of-construction-deaths-and-how-to-prevent-site-accidents.
Roberts, D., and M. Golparvar-Fard. 2019. “End-to-end vision-based detection, tracking and activity analysis of earthmoving equipment filmed at ground level.” Autom. Constr. 105 (Sep): 102811. https://doi.org/10.1016/j.autcon.2019.04.006.
Salminen, S., and T. Tallberg. 1996. “Human errors in fatal and serious occupational accidents in Finland.” Ergonomics 39 (7): 980–988. https://doi.org/10.1080/00140139608964518.
Seo, J., S. Han, S. Lee, and H. Kim. 2015. “Computer vision techniques for construction safety and health monitoring.” Adv. Eng. Inf. 29 (2): 239–251. https://doi.org/10.1016/j.aei.2015.02.001.
Skibniewski, M. 2014. “Research trends in information technology applications in construction safety engineering and management.” Front. Eng. Manage. 1 (3): 246–259. https://doi.org/10.15302/J-FEM-2014034.
Socias-Morales, C. M., C. K. Chaumont Menéndez, and S. M. Marsh. 2018. “Fatal work-related falls in the United States, 2003-2014.” Am. J. Ind. Med. 61 (3): 204–215. https://doi.org/10.1002/ajim.22810.
Sunindijo, R. Y., and P. X. W. Zou. 2012. “Political skill for developing construction safety climate.” J. Constr. Eng. Manage. 138 (May): 605–612. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000482.
Teizer, J., and P. A. Vela. 2009. “Personnel tracking on construction sites using video cameras.” Adv. Eng. Inf. 23 (4): 452–462. https://doi.org/10.1016/j.aei.2009.06.011.
Wang, C.-Y., and H.-Y. M. Liao. 2021. Scaled-YOLOv4: Scaling cross stage partial network. Ithaca, NY: Cornell Univ. https://doi.org/10.1016/j.aei.2009.06.011.
Wang, M., P. Wong, H. Luo, S. Kumar, V. Delhi, and J. Cheng. 2019. “Predicting safety hazards among construction workers and equipment using computer vision and deep learning techniques.” In Proc., 36th Int. Symp. on Automation and Robotics in Construction, ISARC 2019, 399–406. London: International Association for Automation and Robotics in Construction. https://doi.org/10.22260/ISARC2019/0054.
Yang, K., C. R. Ahn, M. C. Vuran, and S. S. Aria. 2016. “Semi-supervised near-miss fall detection for ironworkers with a wearable inertial measurement unit.” Autom. Constr. 68 (Aug): 194–202. https://doi.org/10.1016/j.autcon.2016.04.007.
Yang, K., S. Aria, C. R. Ahn, and T. L. Stentz. 2014. “Automated detection of near-miss fall incidents in iron workers using inertial measurement units.” In Construction Research Congress 2014: Construction in a Global Network, 935–944. Reston, VA: ASCE. https://10.1061/9780784413517.096.
Yang, X., Y. Yu, S. Shirowzhan, S. Sepasgozer, and H. Li. 2020. “Automated PPE-Tool pair check system for construction safety using smart IoT.” J. Build. Eng. 32 (Nov): 101721. https://doi.org/10.1016/j.jobe.2020.101721.
Ye, H., K. Dong, and T. Gu. 2018. “HiMeter: Telling you the height rather than the altitude.” Sensors 18 (6): 1712. https://doi.org/10.3390/s18061712.
Zhang, H., X. Yan, H. Li, R. Jin, and H. Fu. 2019. “Real-time alarming, monitoring, and locating for non-hard-hat use in construction.” J. Constr. Eng. Manage. 145 (3): 04019006. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001629.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 27, 2021
Accepted: Jan 26, 2022
Published online: Apr 25, 2022
Published in print: Jul 1, 2022
Discussion open until: Sep 25, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- He Huang, Hao Hu, Feng Xu, Zhipeng Zhang, Kinesiology-Inspired Assessment of Intrusion Risk Based on Human Motion Features, Journal of Construction Engineering and Management, 10.1061/JCEMD4.COENG-13638, 150, 7, (2024).
- Raissa Marchiori, Siyuan Song, Solomon Ajasa, Peiyi Lyu, Assessing Usability, Frequency, and Efficiency of Fall Hazard Prevention Devices in Construction: Development of a Comprehensive Questionnaire for Evaluation, Construction Research Congress 2024, 10.1061/9780784485293.052, (518-527), (2024).
- Solomon Sesesie Ajasa, Siyuan Song, Detecting and Preventing Falls Using a Hybrid Technology System: A Review, Computing in Civil Engineering 2023, 10.1061/9780784485248.048, (400-408), (2024).
- Ziyu Jin, John Gambatese, Development of a Cost-Effective Proximity Warning System for Fall Protection, Computing in Civil Engineering 2023, 10.1061/9780784485248.045, (375-382), (2024).
- Guiqiang Chen, Pinsheng Duan, Jianliang Zhou, Qian Shi, Network Modeling and Characterization of Unsafe Behaviour in Fall-from-Height Accidents in Construction, ICCREM 2023, 10.1061/9780784485217.020, (202-213), (2023).
- Hunsang Choo, Bogyeong Lee, Hyunsoo Kim, Byungjoo Choi, Automated detection of construction work at heights and deployment of safety hooks using IMU with a barometer, Automation in Construction, 10.1016/j.autcon.2022.104714, 147, (104714), (2023).
- María del Carmen Rey-Merchán, Antonio López-Arquillos, José Manuel Soto-Hidalgo, Prevention of Falls from Heights in Construction Using an IoT System Based on Fuzzy Markup Language and JFML, Applied Sciences, 10.3390/app12126057, 12, 12, (6057), (2022).
- Jeeyoung Lim, Dae Gyo Jung, Chansik Park, Dae Young Kim, Computer Vision Process Development regarding Worker’s Safety Harness and Hook to Prevent Fall Accidents: Focused on System Scaffolds in South Korea, Advances in Civil Engineering, 10.1155/2022/4678479, 2022, (1-12), (2022).
- Sharjeel Anjum, Syed Farhan Alam Zaidi, Rabia Khalid, Chansik Park, Artificial Intelligence-based Safety Helmet Recognition on Embedded Devices to Enhance Safety Monitoring Process, 2022 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET), 10.1109/IICAIET55139.2022.9936839, (1-4), (2022).