Innovation in Construction Megaprojects
Publication: Journal of Construction Engineering and Management
Volume 142, Issue 11
Abstract
The construction industry is often criticized for its lack of innovation. Yet, that same industry designs and builds the largest projects of the world—megaprojects. This discrepancy begs the question, whether lack of innovation is a valid description of the construction industry. A megaproject seems ideal to test the construction industry for its innovation potential. For the collection and analysis of data, longitudinal action research, combined with a case study approach, provides the required level of detail and an understanding of interdependencies. The BangNa Expressway in Thailand serves as the focal case; it is the largest bridge in the world. The following aspects are primary contributions to the stock of knowledge: we identify 58 innovations, some are product or construction technology innovations, others are within the technical, management, or contractual organization. This magnitude attests to the ability of the construction industry to innovate on a level not yet identified. The whole project is embedded in a system of interdependent innovations, and strings of incremental innovation lead to very important changes. There are many innovative features on the world level which different champions sponsored. The construction industry, with its bewildering diversity of products and services, provides results on a continuum from repetition to innovation, with megaprojects situated at the innovative end.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbot, C., Barrett, P., Ruddock, L., and Sexton, M. (2007). “Hidden innovation in the construction and property sectors.” RICS Res. Paper Ser., 7(20), 1–20.
Baregheh, A., Rowley, J., and Sambrook, S. (2009). “Towards a multi-disciplinary definition of innovation.” Manage. Decis., 47(8), 1323–1339.
Blayse, A., and Manley, K. (2004). “Key influences on construction innovation.” Constr. Innovation, 4(3), 143–154.
Bröchner, J. (2010). “Construction contractors as service innovators.” Build. Res. Inf., 38(3), 235–246.
Brockmann, C. (2000). “Precast elements for segmental bridge construction of the Bang Na Expressway, Bangkok.” Proc., PCI/FHWA/FIB Int. Symp. on High Performance Concrete, L. S. Johal, ed., Precast/Prestressed Concrete Institute, Chicago, 368–376.
Brockmann, C. (2001). “Temperature-induced and time-dependent deformations in wide-spanning bridge segments.” Proc., 5th Congress of the Croatian Structural Engineers, Croatian Association of Civil Engineers, Cavtat, Croatia, 79–84.
Brockmann, C., and Kähkönen, K. (2012). “Evaluating construction project complexity.” Proc., MCRP Congress 2012, Birmingham School of Built Environment, Birmingham, U.K., 716–727.
Brockmann, C., and Rogenhofer, H. (2000). “Bang Na Expressway, Bangkok, Thailand—World’s longest bridge and largest precasting operation.” PCI J., 45(1), 26–38.
Coughlan, P., and Coghlan, D. (2002). “Action research for operations management.” Int. J. Oper. Prod. Manage., 22(2), 220–240.
Dibner, D., and Lemer, A. (1992). The role of public agencies in fostering new technology and innovation in building, National Academy Press, Washington, DC.
Dubois, A., and Gadde, L. (2002). “The construction industry as a loosely coupled system: Implications for productivity and innovation.” Constr. Manage. Econ., 20(7), 621–631.
Fischer, O., and Krill, A. (1998). “The BangNa Expressway—A full-scale loading test of a precast segmental box girder bridge for 6 lanes of traffic.” Proc., 13th FIP-Congress, A. A. Balkema, Rotterdam, Netherlands, 503–506.
Freeman, C., and Soete, L. (1997). The economics of industrial innovation, 3rd Ed., Continuum, London.
Gambatese, J., and Hallowell, M. (2011). “Enabling and measuring innovation in the construction industry.” Constr. Manage. Econ., 29(6), 553–567.
Gann, D. (2003). “Guest editorial: Innovation in the built environment.” Constr. Manage. Econ., 21(6), 553–555.
Gann, D., and Salter, A. (2000). “Innovation in project-based, service enhanced firms: The construction of complex products and systems.” Res. Policy, 29(7), 955–972.
Harty, C. (2005). “Innovation in construction: A sociology of technology approach.” Build. Res. Inf., 33(6), 512–522.
Harty, C. (2008). “Implementing innovation in construction: Contexts, relative boundedness and actor-network theory.” Constr. Manage. Econ., 26(10), 1029–1041.
Henderson, R., and Clark, K. (1990). “Architectural innovation: The reconfiguration of existing product technologies and the failure of established firms.” Administrative Sci. Q., 35(1), 9–30.
Hofstede, G., and Hofstede, G. (2005). Cultures and organizations: Software of the mind, McGraw-Hill, New York.
Johnson, J., and Tatum, C. (1993). “Technology in marine construction firms.” J. Constr. Eng. Manage., 148–162.
Koskela, L., and Vrijhoef, R. (2001). “Is the current theory of construction a hindrance to innovation?” Build. Res. Inf., 29(3), 197–207.
Krill, A., and Eibl, S. (1999). “Tragverhalten der geneigten Elastomerlager des Bang-Na Expressway [Behavior of the inclined elastomeric bearings of the BangNa Expressway].” Bauingenieur, 74(4), 183–187 (in German).
Laborde, M., and Sanvido, V. (1994). “Introducing new process technologies into construction companies.” J. Constr. Eng. Manage., 488–508.
Lewin, K. (1946). “Action research and minority problems.” J. Soc. Issues, 2(4), 34–46.
Loosemore, M. (2014). Innovation, strategy and risk in construction: Turning serendipity into capability, Routledge, London.
Lu, S., and Sexton, M. (2006). “Innovation in small construction knowledge-intensive professional service firms: A case study of an architectural practice.” Constr. Manage. Econ., 24(12), 1269–1282.
Luhmann, N. (2013). Introduction to systems theory, Polity Press, Cambridge, U.K.
Manley, K. (2006). “The innovation competence of repeat public sector clients in the Australian construction industry.” Constr. Manage. Econ., 24(12), 1295–1304.
Mintzberg, H. (2009). Managing, Berrett-Koehler, San Francisco.
Nam, C., and Tatum, C. (1997). “Leaders and champions for construction innovation.” Constr. Manage. Econ., 15(3), 259–270.
OECD (Organisation for Economic Co-operation and Development). (2005). Oslo manual: Guidelines for collecting and interpreting innovation data, 3rd Ed., Paris.
Ozorhon, B. (2013). “Analysis of construction innovation process at project level.” J. Manage. Eng., 455–463.
Podolny, W., and Muller, J. (1982). Construction and design of prestressed concrete segmental bridges, Wiley, New York.
Popper, K. (2002). Logic of scientific discovery, Routledge, London.
Prade, W., and Surbeck, H. (1998). “Segment-Verlegegeräte für die Hochstraßen in Bangkok [Segment erection girders for the expressways in Bangkok].” Bauingenieur, 73(9), 366–380 (in German).
Reichstein, T., Salter, A., and Gann, D. (2005). “Last among equals: A comparison of innovation in construction, services and manufacturing in the U.K.” Constr. Manage. Econ., 23(6), 631–644.
Sexton, M., and Barrett, P. (2003a). “A literature synthesis of innovation in small construction firms: Insights, ambiguities and questions.” Constr. Manage. Econ., 21(6), 613–622.
Sexton, M., and Barrett, P. (2003b). “Appropriate innovation in small construction firms.” Constr. Manage. Econ., 21(6), 623–633.
Slaughter, S. (1993). “Builders as sources of construction innovation.” J. Constr. Eng. Manage., 532–549.
Slaughter, S. (1998). “Models of construction innovation.” J. Constr. Eng. Manage., 226–231.
Slaughter, S., and Shimizu, H. (2000). “‘Clusters’ of innovations in recent long span and multi-segmental bridges.” Constr. Manage. Econ., 18(3), 269–280.
Sullivan, G., Barthorpe, S., and Robbins, S. (2010). Managing construction logistics, Wiley-Blackwell, Oxford, U.K.
Tatum, C. (1987). “Process of innovation in construction firm.” J. Constr. Eng. Manage., 648–663.
Tatum, C. (1988). “Classification system for construction technology.” J. Constr. Eng. Manage., 344–363.
Taylor, J. (1995). Economics, Houghton Mifflin, Boston.
Tushman, M., and Nelson, R. (1990). “Introduction: Technology, organizations and innovation.” Administrative Sci. Q., 35(1), 1–8.
Vainio, T. (2011). “Building renovation—A new industry?” Proc., Conf. on Management and Innovation for a Sustainable Built Environment, International Council for Research and innovation in Building and Construction, Delft, Netherlands.
Van de Ven, A. (1986). “Central problems in the management of innovation.” Manage. Sci., 32(5), 590–607.
Walker, D., Hampson, K., and Ashton, S. (2003). “Developing an innovative culture through relationship-based procurement systems.” Procurement strategies, D. Walker, and K. Hampson, eds., Blackwell, Oxford, U.K., 236–257.
Winch, G. (1998). “Zephyrs of creative destruction: Understanding the management of innovation in construction.” Build. Res. Inf., 26(5), 268–279.
Winch, G. (2003). “How innovative is construction? Comparing aggregated data on construction innovation and other sectors—A case of apples and pears.” Constr. Manage. Econ., 21(6), 651–654.
Woodhuysen, J., and Abbey, I. (2004). Why is the construction industry so backward? Wiley, Chichester, U.K.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Sep 2, 2015
Accepted: Feb 23, 2016
Published online: May 10, 2016
Discussion open until: Oct 10, 2016
Published in print: Nov 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.