Abstract
Currently, there is no comprehensive benchmark of life-cycle assessment for the rigid pavement alternatives for highway rehabilitation. To fill this gap, the major objective of this study is to investigate the environmental, economic, and social impacts of the three most widely adopted rigid pavement choices through a life-cycle assessment approach with custom-built economic input-output life-cycle assessment (EIO-LCA) models. Quantity takeoffs were performed for each alternative assuming a 1-lane-km highway rehabilitation. Subsequently, the construction costs of each alternative were computed in order to determine the present values for a life span of 50 years, while at the same time accounting for a different life expectancy for each pavement rehabilitation strategy. The present values were then incorporated into a corresponding EIO-LCA model. The results clearly indicate that continuously reinforced concrete pavement (CRCP) is the most sustainable choice and much preferable to the other alternatives for minimizing negative environmental, economic and social impacts from the life-cycle perspective. This finding champions a wider adoption of CRCP for future sustainable transportation infrastructure development projects, as CRCP’s relatively high initial construction cost can be recouped by long-term sustained benefits. The results and findings of this study can serve as a solid foundation for industry practitioners and decision-makers to make better-informed project decisions when choosing the most sustainable pavement alternatives from a life-cycle perspective.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1993). “AASHTO guide for design of pavement structures 1993.” Washington, DC.
AISI (American Iron and Steel Institute). (2012). “Continuously reinforced concrete pavement: Roads for this generation and the next.” 〈http://www.steel.org/en/The%20New%20Steel/∼/media/Files/SMDI/Construction/CRCP%20-%20Marketing%20-%20CRCP%20Brochure.ashx〉 (Apr. 8, 2013).
Berthiaume, R., and Bouchard, C. (1999). “Energy analysis of the environmental impact of paving material manufacture.” Trans. Can. Soc. Mech. Eng., 23(1B), 187–196.
BTS (Bureau of Transportation Statistics). (2010). “National transportation statistics.” Washington, DC.
Caltrans (California Department of Transportation). (2010). “Life-cycle cost analysis procedures manual.” Sacramento, CA.
Caltrans (California Department of Transportation). (2011). “Highway design manual.” 〈http://www.dot.ca.gov/hq/oppd/hdm/hdmtoc.htm〉 (Dec. 11, 2013).
Cass, D., and Mukherjee, A. (2011). “Calculation of greenhouse gas emissions for highway construction operations by using a hybrid life-cycle assessment approach: Case study for pavement operations.” J. Constr. Eng. Manage., 1015–1025.
Choi, K., and Kwak, Y. (2012). “Decision-support model for incentives/disincentives time-cost tradeoff.” Int. J. Autom. Construct., 21(1), 219–228.
Choi, K., Kwak, Y. H., Pyeon, J., and Son, K. (2012). “Schedule effectiveness of alternative contracting strategies for transportation infrastructure improvement projects.” J. Constr. Eng. Manage., 323–330.
CMU (Carnegie Mellon University). (2011). “EIO-LCA: Free, fast, easy life cycle assessment.” 〈http://www.eiolca.net〉 (Dec. 2, 2011).
CRSI (Concrete Reinforcing Steel Institute). (2012). “Paving the prairie states: CRCP’s success in north and south Dakota.” 〈http://www.conveyinc.com/things/crsi58.pdf〉 (Apr. 10, 2012).
Eccleston, C. (2008). NEPA and environmental planning: Tools, techniques, and approaches for practitioners, CRC Press, Boca Raton, FL.
FHWA (Federal Highway Administration). (2006a). “Geotechnical aspects of pavements.” 〈http://www.fhwa.dot.gov/engineering/geotech/pubs/05037/05037.pdf〉 (Mar. 10, 2013).
FHWA (Federal Highway Administration). (2006b). “Highway statistics 2005.” Washington, DC.
FHWA (Federal Highway Administration). (2007). “Long-life concrete pavements: Best practices and directions from the states.” 〈http://www.fhwa.dot.gov/pavement/concrete/pubs/07030/07030.pdf〉 (Jun. 25, 2013).
Guinee, J. (2002). “Handbook on life cycle assessment operational guide to the ISO standards.” Int. J. Life Cycle Assess., 7(5), 311–313.
Hendrickson, C., Horvath, A., Joshi, S., and Lave, L. (1998). “Economic input-output models for environmental life-cycle assessment.” Environ. Sci. Technol., 32(7), 184–191.
Hendrickson, C., Lave, L., and Matthews, H. (2005). Environmental life cycle assessment of goods and services: An input-output approach, Resources for the Future Press, London.
Horvath, A. (1997). “Estimation of environmental implications of construction materials and designs using life cycle assessment techniques.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Carnegie Mellon Univ., Pittsburgh.
Horvath, A., and Hendrickson, C. (1998a). “Comparison of environmental implications of asphalt and steel-reinforced concrete pavements.”, Transportation Research Board, Washington, DC, 105–113.
Horvath, A., and Hendrickson, C. (1998b). “Steel versus steel-reinforced concrete bridges: Environmental assessment.” J. Infrastruct. Syst., 111–117.
Kim, B., Lee, H., Park, H., and Kim, H. (2012). “Framework for estimating greenhouse gas emissions due to asphalt pavement construction.” J. Constr. Eng. Manage., 1312–1321.
MoDOT. (2004). “Pavement design and type selection process.” Jefferson City, MO.
Ochoa, L., Hendrickson, C., and Matthews, H. (2002). “Economic input-output life-cycle assessment of US residential buildings.” J. Infrastruct. Syst., 132–138.
Park, K., Hwang, Y., Seo, S., and Seo, H. (2003). “Quantitative assessment of environmental impacts on life cycle of highways.” J. Constr. Eng. Manage., 25–31.
Roudebush, W. (1999). Environmental value engineering assessment of concrete and asphalt pavement, Portland Cement Association, Skokie, IL.
RS Means. (2002). “Heavy civil construction cost data.” Kingston, MA.
Santero, N. J., Masanet, E., and Horvath, A. (2011). “Life-cycle assessment of pavements. Part I: Critical review.” Resour. Conserv. Recycl., 55(9–10), 801–809.
Treloar, G., Love, P., and Crawford, R. (2004). “Hybrid life-cycle inventory for road construction and use.” J. Constr. Eng. Manage., 43–49.
U.S. EPA. (2011). “Defining life cycle assessment.” 〈http://www.gdrc.org/uem/lca/lca-define.html〉 (Nov. 24, 2012).
Weiland, C., and Muench, S. T. (2010). “Life-cycle assessment of reconstruction options for interstate highway pavement in Seattle, Washington.”, Transportation Research Board, Washington, DC, 18–27.
WSDOT (Washington State Department of Transportation). (2011). “WSDOT pavement guide.” 〈http://training.ce.washington.edu/wsdot/〉 (Nov. 24, 2012).
Zapata, P., and Gambatese, J. (2005). “Energy consumption of asphalt and reinforced concrete pavement materials and construction.” J. Infrastruct. Syst., 9–20.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 19, 2014
Accepted: Jul 22, 2015
Published online: Sep 30, 2015
Published in print: Feb 1, 2016
Discussion open until: Feb 29, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.