Causes of Time Buffer and Duration Variation in Construction Project Tasks: Comparison of Perception to Reality
Publication: Journal of Construction Engineering and Management
Volume 140, Issue 6
Abstract
Due to the inherent nature of the construction industry, all construction projects have some amount and type of uncertainty. This uncertainty can lead to variation in project task durations from what was originally planned. As a result, construction personnel compensate for the uncertainty by adding a time buffer to absorb variations in the work plan. For the purpose of this research, a time buffer is defined as the amount of time included in task durations to compensate for uncertainty and to protect against variation. Variation is defined as the difference between the planned and actual task duration. Although previous research acknowledges time buffer additions, the root causes for adding a buffer have not been thoroughly researched. A nationwide survey was administered to project managers, superintendents, and foremen to identify the most severe reasons for adding time buffers to construction task durations. The root causes of variation have been previously identified and are used as the comparison benchmark. Contributions to the body of knowledge include (1) comparing and contrasting the overall most severe causes of time buffers with the most severe causes of duration variation to identify disconnects between the perception of concerns about uncertainty and the reality of what causes task duration variations at different levels of management; and (2) the use of factor analysis to quantitatively identify the underlying structure of time buffer factors. The findings of this research will help construction managers understand what drives the need for buffers in their construction schedules and allow them to focus efforts on strategically addressing the most critical areas of concern and uncertainty. Furthermore, the research reveals similarities and disconnects in the effects of uncertainty on planning and task execution.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alves, T. C. L., and Tommelein, I. D. (2004). “Simulation of buffering and batching practices.” Proc., 12th Conf. of the Int. Group for Lean Construction (IGLC 12), Lean Construction Institute, Arlington, VA, 277–290.
Ballard, G. (2005). “Construction: One type of project production system.” Proc., 13th the Int. Group for Lean Construction (IGLC 13), Lean Construction Institute, Arlington, VA, 29–35.
Ballard, G., and Howell, G. (1995). “Toward construction JIT.” Proc., 1995 ARCOM Conf., Association of Researchers in Construction Management, Univ. of York, York, England.
Borcherding, J., and Garner, D. (1981). “Work force motivation and productivity on large jobs.” J. Constr. Div., 107(3), 443–453.
Chan, E. H. W., and Au, M. C. Y. (2009). “Factors influencing building contractors’ pricing for time-related risks in tenders.” J. Constr. Eng. Manage., 135–145.
Dai, J., Goodrum, P. M., and Maloney, W. F. (2009). “Construction craft workers’ perceptions of the factors affecting their productivity.” J. Constr. Eng. Manage., 217–226.
Doloi, H. (2007). “Twinning motivation, productivity and management strategy in construction projects.” Eng. Manage. J., 19(3), 30–40.
Galbraith, J. R. (1977). Organizational design, Addison–Wesley, Reading, MA.
Gorsuch, R. L. (1983). Factor analysis, 2nd Ed., Lawrence Erlbaum, Hillsdale, NJ.
Günhan, S., and Arditi, D. (2007). “Budgeting owner’s construction contingency.” J. Constr. Eng. Manage., 492–497.
Harbuck, R. H. (2004). “Competitive bidding for highway construction projects.” Proc., 48th AACE Int. Meeting, AACE International, Morgantown, WV, ES.9.1–ES.9.4.
Harmon, H. H. (1976). Modern factor analysis, 3rd Ed., University of Chicago Press, Chicago.
Higgins, D., Fryer, S., Stratton, R., Simpson, D., and Reginato, J. (2012). “Using the forward thinking index to reduce delays related to request for information process.” Proc., 20th Conf. of the Int. Group for Lean Construction (IGLC 20), Lean Construction Institute, Arlington, VA, 1–10.
Hopp, W. J., and Spearman, M. L. (2008). Factory physics, 3rd Ed., McGraw-Hill, New York, 72.
Horman, M., and Kenley, R. (1998). “Process dynamics: Identifying a strategy for the deployment of buffers in building projects.” Int. J. Logist. Res. Appl., 1(3), 221–237.
Horman, M., and Thomas, H. R. (2005). “Role of inventory buffers in construction labor performance.” J. Constr. Eng. Manage., 834–843.
Hornby, A. S., ed. (1974). Oxford advanced learner’s dictionary of current English, Oxford University Press, Oxford, U.K.
Howell, G. A., Ballard, G., Tommelein, I. D., and Koskela, I. (2004). “Discussion of ‘reducing variability to improve performance as a lean construction principle.” J. Constr. Eng. Manage., 299–304.
Howell, G. A., Laufer, A., and Ballard, G. (1993). “Interaction between sub-cycles: One key to improved methods.” J. Constr. Eng. Manage., 714–728.
Kaiser, H. F. (1974). “An index of factorial simplicity.” Psychometrika, 39(1), 31–36.
Kim, J. O., and Mueller, C. W. (1978). “Introduction to factor analysis.”, Sage Publications, Newbury Park, CA.
Kimpland, S. L. (2009). 2009 contractor productivity survey results, FMI Corporation, Raleigh, NC.
Kline, P. (1994). An easy guide to factor analysis, Routledge, New York.
Koskela, L. J. (2000). “An exploration towards a production theory and its application to construction.” Ph.D. thesis, Teknillinen Korkeakoulu, Helsinki, Finland.
Lee, S., Pena-Mora, F., and Park, M. (2006). “Reliability and stability buffering approach: Focusing on the issues of errors and changes in concurrent design and construction projects.” J. Constr. Eng. Manage., 452–464.
Liberda, M., Ruwanpura, J., and Jergeas, G. (2003). “Construction productivity improvement: A study of human, management and external issues.” Proc., Construction Research Congress, ASCE, Reston, VA.
Lu, W., Shen, L., and Yam, M. C. H. (2008). “Critical success factors for competitiveness of contractors: China study.” J. Constr. Eng. Manage., 972–982.
Mak, S., and Picken, D. (2000). “Using risk analysis to determine construction project contingencies.” J. Constr. Eng. Manage., 130–136.
Oglesby, C. H., Parker, H. W., and Howell, G. A. (1989). Productivity improvement in construction, McGraw-Hill, New York.
Ohno, T. (1988). Toyota production system: Beyond large-scale production, Productivity Press, London.
Ott, R. L., and Longnecker, M. T. (2001). An introduction to statistical methods and data analysis, 5th Ed., Duxberry Press, Pacific Grove, CA.
Portas, J., and AbouRizk, S. (1997). “Neural network model for estimating construction productivity.” J. Constr. Eng. Manage., 399–410.
Rilett, L. R. (1998). “Identifying component variability of end product specification tests.” J. Constr. Eng. Manage., 133–138.
Risner, R. (2010). Auditing construction contingency, Association of Healthcare Internal Auditors, Wheat Ridge, CO, 37–38.
Smith, G. R., and Bohn, C. M. (1999). “Small to medium contractor contingency and assumption of risk.” J. Constr. Eng. Manage., 101–108.
Somnez, R., and Rowlings, J. E., (1998). “Construction labor productivity modeling with neural networks.” J. Constr. Eng. Manage., 498–504.
Spearman, C. (1927). The abilities of man, Macmillan, Oxford, U.K.
Stevens, J. (1986). Applied multivariate statistics for the social sciences, Lawrence Erlbaum Associates, Hillsdale, NJ.
Thomas, H. R., Horman, M. J., Lemes de Souza, U. E., Zavrski, I. (2002). “Reducing variability to improve performance as a lean construction principle.” J. Constr. Eng. Manage., 144–154.
Thomas, H. R., Riley, D. R., and Messner, J. I. (2005). “Fundamental principles of site material management.” J. Constr. Eng. Manage., 808–815.
Thomas, H. R., and Sakarcan, A. S. (1994). “Forecasting labor productivity using factor model.” J. Constr. Eng. Manage., 228–239.
Tommelein, I. D., Riley, D. R., and Howell, G. A. (1999). “Parade game: Impact of work flow variability on trade performance.” J. Constr. Eng. Manage., 304–310.
Trost, S. M., and Oberlender, G. D. (2003). “Predicting accuracy of early cost estimates using factor analysis and multivariate regression.” J. Constr. Eng. Manage., 198–204.
Wambeke, B. W., Hsiang, S., and Liu, M. (2011). “Causes of variation in construction project task starting times and duration.” J. Constr. Eng. Manage., 663–677.
Womack, J. P., and Jones, D. T. (1996). Lean thinking: Banish waste and create wealth in your corporation, Simon and Shuster, New York.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 140 • Issue 6 • June 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 22, 2012
Accepted: Nov 5, 2013
Published online: Mar 17, 2014
Published in print: Jun 1, 2014
Discussion open until: Aug 17, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.