Safety Climate Improvement: Case Study in a Chinese Construction Company
Publication: Journal of Construction Engineering and Management
Volume 137, Issue 1
Abstract
A positive safety climate can improve employees’ safety awareness and reduce workers’ unsafe behaviors. Having consistent key factors that comprise safety climate is paramount in facilitating the measurement and comparison of safety climate over time which helps identify effective approaches to improve safety performance. This paper examines the consistency of safety climate factor structure and safety climate improvements over time in a Chinese construction company. It adopts a case study approach and reports on using the same safety climate instrument to carry out two surveys, three years apart. The exploratory factor analysis showed that the obtained four-factor structure of safety climate remained consistent across the two surveys. Moreover, the confirmatory factor analysis demonstrated that the second-order factor of safety climate was unchanged. Statistically significant improvements were also found on all four identified factors. The governmental or organizational strategies and/or tactics that could stimulate positive improvements on safety climate factors (referred to as stimulators hereinafter) were then identified via interviews with safety management officers in the company. The most effective stimulators were found to include constituting the safety regulations and safety rules, as well as increasing the intensity of safety training and safety promotion. Implications on the consistent factor structure of safety climate and the stimulators are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support from the Natural Science Foundation of China (Grant Nos. NSF70172005 and NSF70572007) and the National Science and Technology Planning Project (Grant No. UNSPECIFIED2006BAJ01B04-03) are gratefully acknowledged.
References
Brown, M. W., and Cudeck, R. (1993). “Alternative ways of assessing model fit.” Testing structural equation models, K. A. Bollen and J. S. Long, eds., Sage, Newbury Park, Calif., 136–162.
Brown, R. L., and Holmes, H. (1986). “The use of a factor-analytic procedure for assessing the validity of an employee safety climate model.” Accid. Anal Prev., 18(6), 455–470.
Choudhry, R. M., Fang, D., and Mohamed, S. (2007). “The nature of safety culture: A survey of the state-of-the-art.” Safety Sci., 45(10), 993–1012.
Clarke, S., and Ward, K. (2006). “The role of leader influence tactics and safety climate in engaging employees’ safety participation.” Risk Anal., 26(5), 1175–1185.
Cooper, M. D. (2000). “Towards a model of safety culture.” Safety Sci., 36(2), 111–136.
Cooper, M. D., and Philips, R. A. (1994). “Validation of a safety climate measure.” Proc., Annual Occupational Psychology Conf., British Psychological Society, Birmingham, U.K.
Cooper, M. D., and Phillips, R. A. (2004). “Exploratory analysis of the safety climate and safety behavior relationship.” J. Safety Res., 35(5), 497–512.
Coyle, I. R., et al. (1995). “Safety climate.” J. Safety Res., 26(4), 247–254.
Díaz, R. I., and Cabrera, D. D. (1997). “Safety climate and attitude as evaluation measures of organizational safety.” Accid. Anal Prev., 29(5), 643–650.
Fang, D. P., and Chen, Y. (2006). “Safety climate in the construction industry: A case study in Hong Kong.” J. Constr. Eng. Manage., 132(6), 573–584.
Flin, R., Mearns, K., O’Connor, P., and Bryden, R. (2000). “Measuring safety climate: Identifying the common features.” Safety Sci., 34(1–3), 177–192.
Floyd, F. J., and Widaman, K. F. (1995). “Factor analysis in the development and refinement of clinical assessment instruments.” Psychol. Assess., 7(3), 286–299.
Glendon, A. I., and Litherland, D. K. (2001). “Safety climate factors, group differences and safety behaviour in road construction.” Safety Sci., 39(3), 157–188.
Glendon, A. I., and Stanton, N. A. (2000). “Perspectives on safety culture.” Safety Sci., 34(1–3), 193–214.
Glendon, I. (2008). “Safety culture: Snapshot of a developing concept.” Int. J. Occup. Health Saf, 24, 179–189.
Glennon, D. P. (1982a). “Measuring organisational safety climate.” Australian Safety News, January/February, 23–28.
Glennon, D. P. (1982b). “Safety climate in organisations.” Proc., 19th Annual Conf. of the Ergonomics Society of Australia and New Zealand, 17–31.
Guldenmund, F. W. (2000). “The nature of safety culture: A review of theory and research.” Safety Sci., 34(1–3), 215–257.
Hair, J. F., et al. (1998). Multivariate data analysis, Prentice-Hall, Upper Saddle River, N.J.
Hau, K. T., Wen, Z., and Cheng, Z. (2004). Structural equation model and its applications, Education Science Press, Beijing.
Havold, J. I. (2005). “Safety-culture in a Norwegian shipping company.” Proc., Traffic Records Forum, Vol. 36, Pergamon-Elsevier Science Ltd., Oxford, U.K., 441–458.
Hofmann, D. A., Morgeson, F. P., and Gerras, S. J. (2003). “Climate as a moderator of the relationship between leader-member exchange and content specific citizenship: Safety climate as an exemplar.” J. Appl. Psychol., 88(1), 170–178.
Hu, L., and Bentler, P. M. (1999). “Cutoff criteria for fit indexes in covariance structure analysis: Conventional versus new alternatives.” Struct. Equation Model., 6(1), 1–55.
Huang, Y. H., Ho, M., Smith, G. S., and Chen, P. Y. (2006). “Safety climate and self-reported injury: Assessing the mediating role of employee safety control.” Accid. Anal Prev., 38(3), 425–433.
Kim, J., and Mueller, C. W. (1978). Introduction to factor analysis: What it is and how to do it, Sage Publications, Beverly Hills, Calif.
Larsson, S., Pousette, A., and Torner, M. (2008). “Psychological climate and safety in the construction industry-mediated influence on safety behaviour.” Proc., 3rd Int. Conf. Working on Safety (WOS2006), Vol. 46, Elsevier Science BV, Amsterdam, The Netherlands, 405–412.
Luria, G. (2008). “Climate strength—How leaders form consensus.” Leadership Q., 19(1), 42–53.
McDonald, R. P., and Ho, M. -H. R. (2002). “Principles and practice in reporting structural equation analyses.” Psychol. Methods, 7(1), 64–82.
Mohamed, S. (2002). “Safety climate in construction cite environments.” J. Constr. Eng. Manage., 128(5), 375–384.
Naveh, E., Katz-Navon, T., and Stern, Z. (2005). “Treatment errors in healthcare: A safety climate approach.” Manage. Sci., 51(6), 948–960.
Neal, A., Griffin, M. A., and Hart, P. M. (2000). “The impact of organizational climate on safety climate and individual behavior.” Safety Sci., 34(1–3), 99–109.
Niskanen, T. (1994). “Safety climate in the road administration.” Safety Sci., 17(4), 237–255.
Pousette, A., Larsson, S., and Torner, M. (2008). “Safety climate cross-validation, strength and prediction of safety behaviour.” Proc., 3rd Int. Conf. Working on Safety (WOS2006), Vol. 46, Elsevier Science BV, Amsterdam, The Netherlands, 398–404.
Seo, D. C., Torabi, M. R., Blair, E. H., and Ellis, N. T. (2004). “A cross-validation of safety climate scale using confirmatory factor analytic approach.” J. Safety Res., 35(4), 427–445.
Siu, O., Phillips, D. R., and Leung, T. (2004). “Safety climate and safety performance among construction workers in Hong Kong: The role of psychological strains as mediators.” Accid. Anal Prev., 36(3), 359–366.
Tharaldsen, J. E., Olsen, E., and Rundmo, T. (2008). “A longitudinal study of safety climate on the Norwegian continental shelf.” Proc., 3rd Int. Conf. Working on Safety (WOS2006), Vol. 46, Elsevier Science BV, Amsterdam, The Netherlands, 427–439.
Toll, B. A., O’Malley, S. S., McKee, S. A., Salovey, P., and Krishnan-Sarin, S. (2007). “Confirmatory factor analysis of the Minnesota nicotine withdrawal scale.” Psychol. Addict. Behav., 21(2), 216–225.
Varonen, U., and Mattila, M. (2000). “The safety climate and its relationship to safety practices, safety of the work environment and occupational accidents in eight wood-processing companies.” Accid. Anal Prev., 32(6), 761–769.
Williamson, A. M., Feyer, A. M., Cairns, D., and Biancotti, D. (1997). “The development of a measure of safety climate: The role of safety perceptions and attitudes.” Safety Sci., 25(1–3), 15–27.
Zhou, Q., Fang, D., and Wang, X. (2008). “A method to identify strategies for the improvement of human safety behavior by considering safety climate and personal experience.” Safety Sci., 46(10), 1406–1419.
Zohar, D. (1980). “Safety climate in industrial organizations: Theoretical and applied implications.” J. Appl. Psychol., 65(1), 96–102.
Zohar, D. (2008). “Safety climate and beyond: A multi-level multi-climate framework.” Proc., 3rd Int. Conf. Working on Safety (WOS2006), Vol. 46, Elsevier Science BV, Amsterdam, The Netherlands, 376–387.
Zohar, D., and Luria, G. (2005). “A multilevel model of safety climate: Cross-level relationships between organization and group-level climates.” J. Appl. Psychol., 90(4), 616–628.
Zohar, D., and Tenne-Gazit, O. (2008). “Transformational leadership and group interaction as climate antecedents: A social network analysis.” J. Appl. Psychol., 93(4), 744–757.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 137 • Issue 1 • January 2011
Pages: 86 - 95
Copyright
© 2011 ASCE.
History
Received: Nov 20, 2008
Accepted: May 24, 2010
Published online: Jun 4, 2010
Published in print: Jan 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.