Integrated Fatigue Life Evaluation Method for Members in Riveted Steel Truss Bridges
Publication: Journal of Performance of Constructed Facilities
Volume 35, Issue 4
Abstract
The riveted steel truss bridge, which is commonly subjected to railway traffic loads, suffers from a potential severe threat of fatigue failure. Therefore, it is imperative to evaluate its fatigue performance. An integrated fatigue life evaluation method is proposed, and three main improvements are included: (1) fatigue evaluation is conducted with a consideration of both the stress ratio effect and load sequence effect; (2) a modified rainflow method maintaining the load sequence is introduced to consider the load sequence; and (3) a whole-range modeling methodology is applied to extend the partially known S-N curve to an S-N curve applicable to the whole range of fatigue regions, which is essential when considering the load sequence effect. To illustrate the effectiveness of the proposed method, the long-term monitoring stress data of an old riveted steel truss bridge are used in the analysis. The fatigue conditions of the monitored members are investigated, the effects of both the stress ratio and load sequence are analyzed, and a key point of fatigue life evaluation is proposed. It is shown that the longitudinal beam of the deck is the critical fatigue member among all monitored members, the stress ratio effect differs with member type and measured point, fatigue life evaluation results are obviously influenced by the effects of both the stress ratio and load sequence, and the load sequence effect is greater than that of the stress ratio effect on the fatigue life evaluation. The proposed integrated method lays a solid foundation for fatigue life evaluation of members in riveted steel truss bridges, which can provide meaningful guidance for maintenance. At the same time, sufficient attention should be devoted to the optimal sensor layout for fatigue life evaluation, which is vital for assessing a structure’s life cycle performance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some data that support the findings of this study are available from the corresponding author upon reasonable request, such as the measured points’ daily fatigue damage indicators based on Miner’s rule and the classical rainflow method.
Acknowledgments
The authors would like to express their gratitude for the financial support received from the National Natural Science Foundation of China (51778106), the Liaoning Revitalization Talents Program (XLYC1907060), the Liaoning BaiQianWan Talents Program, and the Key Program of the Fundamental Research Funds for the Central Universities of China (DUT19ZD203).
References
AASHTO. 1994. LRFD bridge design specifications. Washington, DC: AASHTO.
AASHTO. 2011. The manual for bridge evaluation. Washington, DC: AASHTO.
AASHTO. 2014. LRFD bridge design specifications. Washington, DC: AASHTO.
An, Y. H., D. L. Guan, Y. L. Ding, and J. P. Ou. 2017. “Fast warning method for rigid hangers in a high-speed railway arch bridge using long-term monitoring data.” J. Perform. Constr. Facil. 31 (6): 04017103. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001097.
Anthes, R. J. 1997. “Modified rainflow counting keeping the load sequence.” Int. J. Fatigue 19 (7): 529–535. https://doi.org/10.1016/S0142-1123(97)00078-9.
ASCE Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division. 1982. “Fatigue reliability. Parts 1–4.” J. Struct. Div. 108 (ST1): 3–88. https://doi.org/10.1061/JSDEAG.0005869.
Bai, Y., and W. L. Jin. 2016. Marine structural design. 2nd ed. Amsterdam, Netherlands: Elsevier.
CEN (European Committee for Standardization). 2003a. Actions on structures. Part 2: Traffic loads on bridges. Eurocode 1. EN 1991-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2003b. Design of steel structures. Part 1–9: Fatigue. Eurocode 3. EN 1993-1-9. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005a. Design of steel structures. Part 1–9: Fatigue. Eurocode 3. EN 1993-1-9. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005b. Design of steel structures. Part 2: Steel bridges. Eurocode 3. EN 1993-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2008. Design of steel structures. Part 1–9: Fatigue. Eurocode 3. EN 1993-1-9. Brussels, Belgium: CEN.
Cha, H., B. Y. Liu, A. Prakash, and A. H. Varma. 2016. “Effect of local damage caused by overweight trucks on the durability of steel bridges.” J. Perform. Constr. Facil. 30 (1): 04014183. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000685.
Chinese Standard. 1988. Carbon structural steels. GB 700-88. Beijing: State Science and Technology Commission of the People’s Republic of China.
Cremona, C., B. Eichler, B. Johansson, and T. Larsson. 2013. “Improved assessment methods for static and fatigue resistance of old metallic railway bridges.” J. Bridge Eng. 18 (11): 1164–1173. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000466.
Cui, C., Q. H. Zhang, Y. Luo, H. Hao, and J. Li. 2018. “Fatigue reliability evaluation of deck-to-rib welded joints in OSD considering stochastic traffic load and welding residual stress.” Int. J. Fatigue 111 (Jun): 151–160. https://doi.org/10.1016/j.ijfatigue.2018.02.021.
De Jesus, A. M. P., A. L. L. da Silva, and J. A. F. O. Correia. 2015. “Fatigue of riveted and bolted joints made of puddle iron—An experimental approach.” J. Constr. Steel Res. 104 (Jan): 81–90. https://doi.org/10.1016/j.jcsr.2014.10.012.
Deng, L., W. Wang, and Y. Yu. 2016. “State-of-the-art review on the causes and mechanisms of bridge collapse.” J. Perform. Constr. Facil. 30 (2): 04015005. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000731.
Ghafoori, E., M. Motavalli, A. Nussbaumer, A. Herwig, G. S. Prinz, and M. Fontana. 2015. “Design criterion for fatigue strengthening of riveted beams in a 120-year-old railway metallic bridge using pre-stressed CFRP plates.” Composites, Part B 68 (Jan): 1–13. https://doi.org/10.1016/j.compositesb.2014.08.026.
Hao, S. 2010. “I-35W bridge collapse.” J. Bridge Eng. 15 (5): 608–614. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000090.
Imam, B. M., T. D. Righiniotis, and M. K. Chryssanthopoulos. 2008. “Probabilistic fatigue evaluation of riveted railway bridges.” J. Bridge Eng. 13 (3): 237–244. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:3(237).
Kohout, J., and S. Vechet. 2001. “A new function for fatigue curves characterization and its multiple merits.” Int. J. Fatigue 23 (2): 175–183. https://doi.org/10.1016/S0142-1123(00)00082-7.
Kużawa, M., T. Kaminski, and J. Bien. 2018. “Fatigue assessment procedure for old riveted road bridges.” Arch. Civ. Mech. Eng. 18 (4): 1259–1274. https://doi.org/10.1016/j.acme.2018.03.005.
Lee, Y. L., M. E. Barkey, and H. T. Kang. 2011. Metal fatigue analysis handbook: Practical problem-solving techniques for computer-aided engineering. 1st ed. Amsterdam, Netherlands: Elsevier.
Liu, Z. X., M. H. Hebdon, J. A. F. O. Correia, H. Carvalho, P. M. L. Vilela, A. M. P. de Jesus, and R. A. B. Calcada. 2019. “Fatigue assessment of critical connections in a historic eyebar suspension bridge.” J. Perform. Constr. Facil. 33 (1): 04018091. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001236.
Lou, P., H. Nassif, and D. Su. 2017. “Impact of heavy freight railcar on the remaining fatigue life of centenarian railway bridges.” J. Bridge Eng. 22 (11): 04017097. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001128.
Maljaars, J., D. Leonetti, and C. Maas. 2019. “Fatigue life prediction of hot riveted double covered butt joints.” Int. J. Fatigue 124 (Jul): 99–112. https://doi.org/10.1016/j.ijfatigue.2019.03.002.
Mesmacque, G., S. Garcia, A. Amrouche, and C. Rubio-Gonzalez. 2005. “Sequential law in multiaxial fatigue, a new damage indicator.” Int. J. Fatigue 27 (4): 461–467. https://doi.org/10.1016/j.ijfatigue.2004.08.005.
Musa, I. A., F. R. Mashiri, and X. Q. Zhu. 2016. “Fatigue behaviour of concrete-filled steel tubular joints—A review.” Int. J. Lifecycle Perform. Eng. 2 (1–2): 22–60. https://doi.org/10.1504/IJLCPE.2016.082711.
Pedrosa, B., J. A. F. O. Correia, C. Rebelo, G. Lesiuk, A. M. P. De Jesus, A. A. Fernandes, M. Duda, R. Calcada, and M. Veljkovic. 2019. “Fatigue resistance curves for single and double shear riveted joints from old Portuguese metallic bridges.” Eng. Fail. Anal. 96 (Feb): 255–273. https://doi.org/10.1016/j.engfailanal.2018.10.009.
Railtrack. 2001. Railtrack line code of practice: The structural assessment of underbridges. RT/CE/C/025. London: Railtrack.
Schultz, A. E., and A. J. Gastineau. 2015. Innovative bridge design handbook: Construction, rehabilitation and maintenance. 1st ed. Amsterdam, Netherlands: Elsevier.
Siriwardane, S. A. S. C., M. Ohga, P. B. R. Dissanayake, and T. Kaita. 2010. “Structural appraisal-based different approach to estimate the remaining fatigue life of railway bridges.” Struct. Health Monit. Int. J. 9 (4): 323–339. https://doi.org/10.1177/1475921710361320.
Song, Y. S., Y. L. Ding, W. Zhong, and H. W. Zhao. 2018. “Reliable fatigue-life assessment of short steel hanger in a rigid tied arch bridge integrating multiple factors.” J. Perform. Constr. Facil. 32 (4): 04018038. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001183.
Taras, A., and R. Greiner. 2010. “Development and application of a fatigue class catalogue for riveted bridge components.” Struct. Eng. Int. 20 (1): 91–103. https://doi.org/10.2749/101686610791555810.
Ye, X. W., Y. H. Su, P. S. Xi, B. Chen, and J. P. Han. 2016. “Statistical analysis and probabilistic modeling of WIM monitoring data of an instrumented arch bridge.” Smart Struct. Syst. 17 (6): 1087–1105. https://doi.org/10.12989/sss.2016.17.6.1087.
Yin, X. F., G. B. Song, and Y. Liu. 2019. “Vibration suppression of wind/traffic/bridge coupled system using multiple pounding tuned mass dampers (MPTMD).” Sensors 19 (5): 1133. https://doi.org/10.3390/s19051133.
Zhuang, M. L., C. Q. Miao, and R. F. Chen. 2020. “Fatigue performance analysis and evaluation for steel box girder based on structural health monitoring system.” Struct. Durability Health Monit. 14 (1): 51–79. https://doi.org/10.32604/sdhm.2020.07663.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 2, 2020
Accepted: Feb 11, 2021
Published online: May 14, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 14, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.