Response Prediction Model for Structures of Quayside Container Crane Based on Monitoring Data
Publication: Journal of Performance of Constructed Facilities
Volume 35, Issue 4
Abstract
Structural health monitoring and response prediction are of great significance to ensure safety of structures and avoid structural failures. In order to capture changes of structural state in time and improve accuracy of the response prediction, a new predictive model based on dual-tree complex wavelet transform (DTCWT) combined with autoregressive moving average (ARMA) and support vector regression (SVR) is proposed. Firstly, structural monitoring signals are preprocessed and then decomposed by DTCWT. According to variable regulation of the signal characteristics at different scales, ARMA modeling and SVR training are carried out to realize prediction of each scale respectively. Finally the prediction results of each scale are fused as a final prediction model. The predictive model is applied to two case studies of quayside container cranes on the influence of different numbers of samples in prediction results. The experimental prediction results indicate that the proposed model has better prediction performance of the short-term response compared to other prediction methods, especially when the model is trained by a small number of sample data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is funded by Science and Technology Commission of Shanghai Municipality (15DZ1161203). At the same time, we would like to express thanks to Shanghai B&A Technology for providing data support.
References
Bergeot, B., and S. Bellizzi. 2019. “Steady-state regimes prediction of a multi-degree-of-freedom unstable dynamical system coupled to a set of nonlinear energy sinks.” Mech. Syst. Signal Process. 131 (Sep): 728–750. https://doi.org/10.1016/j.ymssp.2019.05.045.
Chehreh Chelgani, S., B. Shahbazi, and E. Hadavandi. 2018. “Support vector regression modeling of coal flotation based on variable importance measurements by mutual information method.” Measurement 114 (Jan): 102–108. https://doi.org/10.1016/j.measurement.2017.09.025.
Cheng, Y., H. Zhu, K. Hu, J. Wu, X. Shao, and Y. Wang. 2019. “Reliability prediction of machinery with multiple degradation characteristics using double-Wiener process and Monte Carlo algorithm.” Mech. Syst. Signal Process. 134 (Dec): 106333. https://doi.org/10.1016/j.ymssp.2019.106333.
Doucoure, B., K. Agbossou, and A. Cardenas. 2016. “Time series prediction using artificial wavelet neural network and multi-resolution analysis: Application to wind speed data.” Renewable Energy 92 (Jul): 202–211. https://doi.org/10.1016/j.renene.2016.02.003.
Duan, W. Y., Y. Han, L. M. Huang, B. B. Zhao, and M. H. Wang. 2016. “A hybrid EMD-SVR model for the short-term prediction of significant wave height.” Ocean Eng. 124 (Sep): 54–73. https://doi.org/10.1016/j.oceaneng.2016.05.049.
Kingsbury, N. 1999. “Image processing with complex wavelets.” Philos. Trans. R. Soc. 357 (1760): 2543–2560. https://doi.org/10.1098/rsta.1999.0447.
Kingsbury, N. 2001. “Complex wavelets for shift invariant analysis and filtering of signals.” Appl. Comput. Harmon. Anal. 10 (3): 234–253. https://doi.org/10.1006/acha.2000.0343.
Kong, D., Y. Chen, N. Li, C. Duan, L. Lu, and D. Chen. 2019. “Relevance vector machine for tool wear prediction.” Mech. Syst. Signal Process. 127 (Jul): 573–594. https://doi.org/10.1016/j.ymssp.2019.03.023.
Kumar, N. K., R. Savitha, and A. Al Mamun. 2018. “Ocean wave height prediction using ensemble of extreme learning machine.” Neurocomputing 277 (Feb): 12–20. https://doi.org/10.1016/j.neucom.2017.03.092.
Langone, R., C. Alzate, B. De Ketelaere, J. Vlasselaer, W. Meert, and J. A. K. Suykens. 2015. “LS-SVM based spectral clustering and regression for predicting maintenance of industrial machines.” Eng. Appl. Artif. Intell. 37 (Jan): 268–278. https://doi.org/10.1016/j.engappai.2014.09.008.
Lei, Y., N. Li, L. Guo, N. Li, T. Yan, and J. Lin. 2018. “Machinery health prognostics: A systematic review from data acquisition to RUL prediction.” Mech. Syst. Signal Process. 104 (May): 799–834. https://doi.org/10.1016/j.ymssp.2017.11.016.
Li, S., B. R. Mace, and J. S. Dhupia. 2020. “Response statistics prediction for structures with uncertain attachments using a Krylov approach.” J. Sound Vib. 468 (Mar): 115118. https://doi.org/10.1016/j.jsv.2019.115118.
Liu, J., and E. Zio. 2016. “An adaptive online learning approach for support vector regression: Online-SVR-FID.” Mech. Syst. Signal Process. 76–77 (Aug): 796–809. https://doi.org/10.1016/j.ymssp.2016.02.056.
Mellit, A., A. M. Pavan, and M. Benghanem. 2013. “Least squares support vector machine for short-term prediction of meteorological time series.” Theor. Appl. Climatol. 111 (1–2): 297–307. https://doi.org/10.1007/s00704-012-0661-7.
Oh, B. K., B. Glisic, S. W. Park, and H. S. Park. 2020. “Neural network-based seismic response prediction model for building structures using artificial earthquakes.” J. Sound Vib. 468 (Mar): 115109. https://doi.org/10.1016/j.jsv.2019.115109.
Pham, H. T., and B. Yang. 2010. “Estimation and forecasting of machine health condition using ARMA/GARCH model.” Mech. Syst. Signal Process. 24 (2): 546–558. https://doi.org/10.1016/j.ymssp.2009.08.004.
Qiu, G., Y. Gu, and J. Chen. 2020. “Selective health indicator for bearings ensemble remaining useful life prediction with genetic algorithm and Weibull proportional hazards model.” Measurement 150 (Jan): 107097. https://doi.org/10.1016/j.measurement.2019.107097.
Saidi, L., J. Ben Ali, E. Bechhoefer, and M. Benbouzid. 2017. “Wind turbine high-speed shaft bearings health prognosis through a spectral Kurtosis-derived indices and SVR.” Appl. Acoust. 120 (May): 1–8. https://doi.org/10.1016/j.apacoust.2017.01.005.
Selesnick, I. W., R. G. Baraniuk, and N. C. Kingsbury. 2005. “The dual-tree complex wavelet transform.” IEEE Signal Process. Mag. 22 (6): 123–151. https://doi.org/10.1109/MSP.2005.1550194.
Soualhi, A., K. Medjaher, and N. Zerhouni. 2015. “Bearing health monitoring based on hilbert–huang transform, support vector machine, and regression.” IEEE Trans. Instrum. Meas. 64 (1): 52–62. https://doi.org/10.1109/TIM.2014.2330494.
Wang, D., J. Kong, Y. Zhao, and K. Tsui. 2019. “Piecewise model based intelligent prognostics for state of health prediction of rechargeable batteries with capacity regeneration phenomena.” Measurement 147 (Dec): 106836. https://doi.org/10.1016/j.measurement.2019.07.064.
Wang, K., Y. Wu, Y. Gao, and Y. Li. 2017. “New methods to estimate the observed noise variance for an ARMA model.” Measurement 99 (Mar): 164–170. https://doi.org/10.1016/j.measurement.2016.12.029.
Wang, Z., and P. Zhu. 2017. “Response prediction for modified mechanical systems based on in-situ frequency response functions: Theoretical and numerical studies.” J. Sound Vib. 400 (Jul): 417–441. https://doi.org/10.1016/j.jsv.2017.04.019.
Yan, R., R. X. Gao, and X. Chen. 2014. “Wavelets for fault diagnosis of rotary machines: A review with applications.” Signal Process. 96 (Mar): 1–15. https://doi.org/10.1016/j.sigpro.2013.04.015.
Yang, L., Y. Cai, Y. Yang, and Z. Deng. 2020. “Supervisory long-term prediction of state of available power for lithium-ion batteries in electric vehicles.” Appl. Energy 257 (Jan): 114006. https://doi.org/10.1016/j.apenergy.2019.114006.
Yang, Z., L. Ce, and L. Lian. 2017. “Electricity price forecasting by a hybrid model, combining wavelet transform, ARMA and kernel-based extreme learning machine methods.” Appl. Energy 190 (Mar): 291–305. https://doi.org/10.1016/j.apenergy.2016.12.130.
Yu, Y., Y. Li, J. Li, and X. Gu. 2016. “Self-adaptive step fruit fly algorithm optimized support vector regression model for dynamic response prediction of magnetorheological elastomer base isolator.” Neurocomputing 211 (Oct): 41–52. https://doi.org/10.1016/j.neucom.2016.02.074.
Zangooei, M. H., and S. Jalili. 2012. “Protein secondary structure prediction using DWKF based on SVR-NSGAII.” Neurocomputing 94 (Oct): 87–101. https://doi.org/10.1016/j.neucom.2012.04.015.
Zhang, J., C. Zheng, Y. Xia, B. Wang, and P. Chen. 2017. “Optimization enhanced genetic algorithm-support vector regression for the prediction of compound retention indices in gas chromatography.” Neurocomputing 240 (May): 183–190. https://doi.org/10.1016/j.neucom.2016.11.070.
Zhu, S., Z. Li, S. Zhang, Y. Ying, and H. Zhang. 2019. “Deep belief network-based internal valve leakage rate prediction approach.” Measurement 133 (Feb): 182–192. https://doi.org/10.1016/j.measurement.2018.10.020.
Information & Authors
Information
Published In
Journal of Performance of Constructed Facilities
Volume 35 • Issue 4 • August 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 4, 2020
Accepted: Jan 11, 2021
Published online: May 17, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 17, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.