Model for Loading Characteristics of Gas Explosion in a Utility Tunnel
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Performance of Constructed Facilities
Volume 35, Issue 4
Abstract
Gas safety in a utility tunnel is an important scientific problem. In this study, explosion model tests of methane–air mixed gas were conducted to evaluate the safety of the gas. Furthermore, the influences of the concentration of mixed air, ignition mode, and opening area on propagation and distribution law of the blast wave were investigated. The results demonstrated that a significant explosion phenomenon existed if the methane concentration reached 10.5%, manifested by the largest explosion overpressure peak and the highest overpressure growth rate. Flame propagation was accelerated after the explosion under chemical ignition. The overpressure peak was an average of approximately 70% higher than that under the electrode ignition. The explosion overpressure and its impulse can be reduced effectively only for a certain proportion of the tunnel opening area. Therefore, the present study can provide a comprehensive understanding of the loading characteristics and the corresponding mechanism for a gas explosion in various practical tunnels.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The research was supported by the Nature Science Foundation of China (No. 51678018) and the Natural Science Foundation of Beijing (No. 8182009).
References
Cheng, F. M., J. Deng, Z. Q. Cai, and Y. Xiao. 2016. “Influence of gas accumulation scope on destroying characteristics and propagation law of gas explosion pressure waves in a blind tunnel.” [In Chinese.] Min. Saf. Environ. Prot. 43 (4): 1–5.
Chinese Standard. 2015. Technical code for urban utility tunnel engineering. [In Chinese.] GB 50838-2015. Beijing: National Standard of the People’s Republic of China.
Fan, W. P., Y. Gao, Y. M. Zhang, C. L. Chow, and W. K. Chow. 2019. “Experimental studies and modeling on flame velocity in turbulent deflagration in an open tube.” Process Saf. Environ. 129 (Sep): 291–307. https://doi.org/10.1016/j.psep.2019.07.013.
Gates, D. 2008. The detonation phenomenon, 45. Cambridge, UK: Cambridge University Press.
Huo, Y., and W. K. Chow. 2017. “Flame propagation of premixed liquefied petroleum gas explosion in a tube.” Appl. Therm. Eng. 113 (Feb): 891–901. https://doi.org/10.1016/j.applthermaleng.2016.11.040.
Kindracki, J., A. Kobiera, G. Rarata, and P. Wolanski. 2017. “Influence of ignition position and obstacles on explosion development in methane–air mixture in closed vessels.” J. Loss Prev. Process Ind. 20 (4): 551–561.
Li, M., Y. Du, G. Q. Li, S. Qi, S. M. Wang, and S. H. Wei. 2017. “Effects of gasoline-air concentration on explosion overpressure characteristics and flame behavior of semi-open pipeline.” [In Chinese.] J. Saf. Sci. Technol. 13 (10): 174–180.
Lin, W., Y. Hui, C. Wang, and F. L. Huang. 2015. “Experimental investigation about the influence of gas concentration on flame propagation.” [In Chinese.] Trans. Beijing Inst. Technol. 35 (6): 551–555.
Luo, Z. M., Q. Zhang, H. Wang, F. M. Cheng, T. Wang, and J. Deng. 2013. “Numerical simulation of gas explosion in confined space with FLACS.” [In Chinese.] J. Coal Sci. Eng. 38 (8): 1381–1387.
Maremonti, M., G. Russo, E. Salzano, and V. Tufano. 1999. “Numerical simulation of gas explosions in linked vessels.” J. Loss Prev. Process Ind. 12 (3): 189–194. https://doi.org/10.1016/S0950-4230(98)00061-8.
NFPA (National Fire Protection Association). 2018. Standard on explosion protection by deflagration venting, 28–68. Quincy, MA: NFPA.
Qu, Z. W., and M. J. Lin. 2013. “Study on premixed gas detonation wave propagation under different initial conditions.” [In Chinese.] J. Anhui Univ. Nat. Sci. 33 (3): 58–62.
Skjold, K., D. Castellanos, K. L. Olsen, and R. K. Eckhoff. 2014. “Experimental and numerical investigation of constant volume dust and gas explosions in a 3.6-m flame acceleration tube.” J. Loss Prevent. Proc. 30 (Jul): 164–176. https://doi.org/10.1016/j.jlp.2014.05.010.
Wang, C., Y. Hui, B. B. Hu, and Q. G. Song. 2015. “Effect of obstacle shape on gas explosion flame propagation process.” [In Chinese.] Trans. Beijing Inst. Technol. 35 (7): 661–665.
Wu, M., M. P. Burke, S. F. Son, and R. A. Yetter. 2007. “Flame acceleration and the transition to detonation of stoichiometric ethylene/oxygen in microscale tubes.” Proc. Combust. Inst. 31 (2): 2429–2436. https://doi.org/10.1016/j.proci.2006.08.098.
Yan, Q. S., Y. N. Zhang, and Q. W. Sun. 2020. “Characteristic study on gas blast loadings in an urban utility tunnel.” J. Perform. Constr. Facil. 34 (4): 04020076. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001477.
Zhang, J. 2002. “Explosion disaster due to gas & dust and its safety technology.” China Saf. Sci. J. 12 (5): 9–14.
Zhang, Q. 2013. Research on gas explosion experiment and simulation of sealing fire zone in high-gas coal mine. [In Chinese.] Xi’an, China: Xi’an Univ. of Science and Technology.
Zhu, C. J., Z. G. Lu, B. Q. Lin, and B. Y. Jiang. 2010. “Effect of variation in gas distribution on explosion propagation characteristics in coal mines.” Min. Sci. Technol. 20 (4): 516–519.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 20, 2020
Accepted: Dec 11, 2020
Published online: Apr 19, 2021
Published in print: Aug 1, 2021
Discussion open until: Sep 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.