Effect of Queti-Inclination Angles on Structural Performance of Tibetan Timber Beam-Column Joints
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 3
Abstract
This paper presents an experimental investigation of the structural performance of typical Tibetan timber beam-column joints (BCJs) under vertical load in order to study the effect of queti inclination on the load effects. Five full-scale test specimens are fabricated including one normal joint and four specimens with different queti-inclination angles. The failure modes of components, the evolution of failure of the whole joint with increasing angle of queti inclination, and the load-transferring mechanism of the typical Tibetan timber BCJ are studied. Furthermore, an experimental model of the load-displacement relationship is obtained from nonlinear regression of the experimental data. The structural performance of the joint in terms of the stiffness, yield load, ultimate load-carrying capacity, and their degradation with respect to the queti-inclination angle is investigated. It may be concluded that the queti inclination has a great effect on the deformation caused by floor load. This study provides reference for the safety evaluation and preservation of Tibetan cultural heritage structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge Professor S. S. Law for his advice on this paper. The work described in this paper was financially supported by the National Natural Science Foundation of China for Excellent Young Scholars (51422801), Beijing Natural Science Foundation of China (Key Program) (8151003), National Natural Science Foundation of China (Key Program) (51338001), and National Key Technology R&D Program (2015BAK01B02).
References
Chang, W. S., and Hsu, M. F. (2007). “Rotational performance of traditional Nuki joints with gap. II: The behavior of butted Nuki joint and its comparison with continuous Nuki joint.” J. Wood Sci., 53(5), 401–407.
Chang, W. S., Hsu, M. F., and Komatsu, K. (2006). “Rotational performance of traditional Nuki joints with gap. I: Theory and verification.” J. Wood Sci., 52(1), 58–62.
Chen, Z. Y. (2011). “Behaviour of typical joints and the structure of Yingxian Wood Pagoda.” Ph.D. thesis, Harbin Institute of Technology, Harbin, China.
Chen, Z. Y., Zhu, E. C., Pan, J. L., and Wu, G. F. (2016). “Energy-dissipation performance of typical beam-column joints in Yingxian Wood Pagoda: Experimental study.” J. Perform. Constr. Facil., 04015028.
Gao, D. F., Zhao, H. T., Xue, J. Y., and Zhang, P. C. (2002). “Experimental study on the behavior of wooden frame of ancient Chinese ancient buildings under horizontally reverse load.” J. Xi’an Univ. Arch. Tech. (Nat. Sci. Ed.), 34(04), 317–319 (in Chinese).
Guan, Z. W., Kitamori, A., and Komatsu, K. (2008). “Experimental study and finite element modelling of Japanese ‘Nuki’ joints—Part two: Racking resistance subjected to different wedge configurations.” Eng. Struct., 30(7), 2041–2049.
Hassanieh, A., Valipour, H. R., and Bradford, M. A. (2016). “Load-slip behaviour of steel-cross laminated timber (CLT) composite connections.” J. Constr. Steel Res., 122, 110–121.
Jiang, H. Y. (1994). The maintenance report of Potala Palace, Cultural Relics, Beijing.
King, W. S., Yen, J. Y., and Yen, Y. N. (1996). “Joint characteristics of traditional Chinese wooden frames.” Eng. Struct., 18(08), 635–644.
Li, P., Yang, N., and Wang, Y. (2013). “Research on structural present state and damage reasons of ancient Tibetan buildings.” Appl. Mech. Mater., 351–352, 1652–1656.
Liang, S. C. (1984). A pictorial history of Chinese architecture: A study of the development of its structural system and the evolution of its types, MIT, Cambridge, MA.
Liu, H. W. (2011). Mechanics of materials, Higher Education, Beijing.
Lyu, M. N., Zhu, X. Q., and Yang, Q. S. (2017). “Connection stiffness identification of historic timber buildings using temperature-based sensitivity analysis.” Eng. Struct., 131, 180–191.
Ma, B. J. (1991). Construction technology of Chinese ancient timber architectures, Science Press, Beijing.
MOHURD (Ministry of Housing, and Urban-Rural Development of the People’s Republic of China). (2012). Standard for test methods of timber structures GB/T50329-2012, China Architecture and Building, Beijing.
Ngawang, R. (2007). Tibetan architecture overview, Sichuan Fine Arts, Chengdu, China.
Pang, S. J., Oh, J. K., Park, J. S., Park, C. Y., and Lee, J. J. (2011). “Influence of crossing-beam shoulder and wood species on moment-carrying capacity in a Korean traditional dovetail joint.” J. Wood Sci., 57(3), 195–202.
Ramberg, W., and Osgood, W. R. (1943). “Description of stress-strain curves by three parameters.”, National Advisory Committee for Aeronautics, Washington, DC.
Xie, Q. F., Du, B., Li, S., Xiang, W., and Zheng, P. J. (2015a). “Tests for aseismic behaviors of damaged dovetail mortise-tenon joints of ancient timber buildings.” J. Vib. Shock., 34(4), 165–170 (in Chinese).
Xie, Q. F., Du, B., Xiang, W., Zheng, P. J., Cui, Y. Z., and Zhang, F. L. (2015b). “Experimental study on seismic behavior and size effect of dovetail mortise-tenon joints of ancient timber buildings.” J. Build. Struct., 36(3), 112–120 (in Chinese).
Xie, Q. F., Zheng, P. J., Xiang, W., Cui, Y. Z., and Zhang, F. L. (2014). “Experimental study on seismic behavior of damaged straight mortise-tenon joints of ancient timber buildings.” J. Build. Struct., 35(11), 143–150 (in Chinese).
Yan, H. C. (2011). “The experimental and finite element analysis of Tibetan wooden frame system.” M.S. thesis, Beijing Jiaotong Univ., Beijing.
Yang, N., Li, P., Law, S. S., and Yang, Q. S. (2012). “Experimental research on mechanical properties of timber in ancient Tibetan building.” J. Mater. Civ. Eng., 635–643.
Yao, K., Zhao, H. T., and Ge, H. P. (2006). “Experimental studies on the characteristic of mortise-tenon joint in historic timber buildings.” Eng. Mech., 23(10), 168–173 (in Chinese).
Zhao, H. T., Dong, C. Y., Xue, J. Y., Sui, Y., and Zhang, H. Y. (2010). “The experimental study on the characteristics of mortise-tenon joint historic timber buildings.” J. Xi’an Univ. Arch. Tech. (Nat. Sci. Ed.), 42(03), 315–318 (in Chinese).
Zhao, H. T., Zhang, H. Y., Xue, J. Y., Sui, Y., and Wu, L. (2009). “The stiffness analysis on the characteristic of mortise-tenon joint in historical timber buildings.” J. Xi’an Univ. Arch. Tech. (Nat. Sci. Ed.), 41(04), 450–454 (in Chinese).
Zhu, L. (2016). “Study on the seismic performance of ancient Tibetan timber structure.” M.S. thesis, Beijing Jiaotong Univ., Beijing.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 31, 2017
Accepted: Nov 6, 2017
Published online: Mar 9, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 9, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.