Characterization and Appraisal of Technical Specifications in Brick Façade Projects in Spain
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 3
Abstract
This paper presents a quantitative and qualitative study of deficiencies in the design of brick façades, by identifying the most common mistakes by analyzing projects’ technical specifications. To this end, 64 brick façade projects, produced in Spain between 2000 and 2013, were analyzed. In most cases, of the 29 parameters studied, 45% correspond to a lack of definition in the designs and 34% to a lack of data. The most frequent issues are the lack of detail in thermal bridges and the lack of indication of the characteristics of permeability, water sealing, and resistance of the exterior carpentry. Only 13% of the monitored projects were of high quality (8), 66% were of medium quality (42), and 22% were of poor quality (14). Furthermore, a methodology is presented to identify the aspects of the projects that will lead to nonquality costs during the service life of the buildings, and a tool is proposed to allow minimizing errors in the design stage, so as to avoid them in subsequent works. It is shown that the use of this methodology constitutes a suitable preventive strategy, directly improving the infrastructure’s sustainability by preventing between 65 and 75% of damages in façades.
Get full access to this article
View all available purchase options and get full access to this article.
References
Acevedo, M. H. (2011). “The process of codification in qualitative research.” Contrib. Soc. Sci., 5, 1–6.
Adell, J. M., and Vega, S. (2005). “Contemporary brick facades: Standard enclosures.” Informes de la Construcción, 56(495), 13–31.
ASEFA. (2001). Anomalies caused by defects in buildings, Madrid, Spain.
ASEMAS (Mutua de Seguros y Reaseguros de Arquitectos a Prima Fija). (2004). “Cracking and humidity in brick walls of facades.”, Vol. 4, Madrid, Spain, 1–5.
Bauer, E., Pavón, E., Barreira, E., and De Castro, E. K. (2016). “Analysis of building facade defects using infrared thermography: Laboratory studies.” J. Build. Eng., 6, 93–104.
Böhmer, H., and Simon, J. (2011). “Schäden Beim Energieeffizienten Bauen Und Modernisieren.”, IFB Bauforschung. Institut für Bauforschung eV, Berlin (in German).
Boroschek Krauskopf, R., and Saavedra Retamales, R. (2004). “Procedures to ensure the quality of the project.” Guide for the reduction of vulnerability in the design of new healthcare establishments, Pan American Health Organization, Washington, DC, 83–98.
Boucly, F., and Clergeau, J. (1998). Le Management De La Maintenance: Évolution et Mutation, Association Française de Normalisation, Paris (in French).
Bureau Seguritas. (1978). Étude Estadistique de 10.000 Rapports De Défauts En La France, Paris (in French).
Carretero-Ayuso, M. J. (2014). Raising and connections of brick walls (technical orientation documents for buildings), MUSAAT Foundation, Madrid, Spain (in Spanish).
Carretero-Ayuso, M. J., and Moreno-Cansado, A. (2013). National statistical analysis on construction anomalies: Years 2008 to 2010, MUSAAT Foundation, Madrid, Spain (in Spanish).
Couto, A. C. (2014). “Integração Da Análise Ciclo De Vida Nas Práticas De Projeto De Edifícios, Aplicação a Um Caso Prático.” Facultade de Engenharia, Universidade do Porto, Porto, Portugal (in Portuguese).
Eisner, H. (2000). Ingeniería de Sistemas and Gestión de Proyectos, AENOR, Madrid, Spain (in Spanish).
Flores-Colen, I., and de Brito, J. (2010). “A systematic approach for maintenance budgeting of buildings facades based on predictive and preventive strategies.” Constr. Build. Mater., 24(9), 1718–1729.
Garcez, N., Lopes, N., de Brito, J., Sá, G., and Silvestre, J. D. (2015). “Influence of design on the service life of pitched roofs’ cladding.” J. Perform. Constr. Facil., 04014073.
Garcez, N., Lopes, N., de Brito, J., and Silvestre, J. (2012). “System of inspection, diagnosis and repair of external claddings of pitched roofs.” Constr. Build. Mater., 35, 1034–1044.
Garcia-Sanz-Calcedo, J., Cuadros-Blázquez, F., Ruiz-Celma, A., and López-Rodríguez, F. (2011). “Eficiencia de una caldera de biomasa en un centro hospitalario. Aprovechamiento de huesos de aceitunas triturados para producción de calor.” DYNA-Ingeniería e Industria, 86(3), 343–349 (in Spanish).
Gaspar, K., Casals, M., and Gangolells, M. (2016). “Classifying system for facades and anomalies.” J. Perform. Constr. Facil., 0000693.
Gaspar, P., and de Brito, J. (2005). “Mapping defect sensitivity in external mortar renders.” Constr. Build. Mater., 19(8), 571–578.
Gaspar, P. L., and de Brito, J. (2008). “Quantifying environmental effects on cement-rendered facades: A comparison between different degradation indicators.” Build. Environ., 43(11), 1818–1828.
Gómez Hermoso, J. (2000). “Principal aspects of buildings foundation and structure projects check.” Informes de la Construcción, 468(52), 19–34.
IBF (Institut für Baustoff-Forschung). (2016). “Forschungs.” ⟨http://www.fehs.de⟩ (Sep. 21, 2016).
Iglesias-Campos, M. Á., Prada Pérez, J. L., and García Fortes, S. (2015). “Microblasting cleaning for facade repair and maintenance: Selecting technical parameters for treatment efficiency.” Constr. Build. Mater., 94, 605–612.
Jefatura del Estado. (1999). “LOE: Law of construction planning.” Spain (in Spanish).
Kovacic, I., Waltenbereger, L., and Gourlis, G. (2016). “Tool for life cycle analysis of facade-systems for industrial buildings.” J. Cleaner Prod., 130, 260–272.
Love, P. E., Lopez, R., and Kim, J. T. (2013). “Design error management: Interaction of people, organisation and the project environment in construction.” Struct. Infrastruct. Eng., 10(6), 811–820.
Mendes Silva, J. A. R., and Falorca, J. (2009). “A model plan for buildings maintenance with application in the performance analysis of a composite facade cover.” Constr. Build. Mater., 23(10), 3248–3257.
Mesa, H. A., Molenaar, K. R., and Alarcón, L. F. (2016). “Exploring performance of the integrated project delivery process on complex building projects.” Int. J. Project Manage., 34(7), 1089–1101.
Monjo Carrió, J. (1990). “Systematic mistakes in the constructive design of facades.” Informes de la Construcción, 42(407), 53–72 (in Spanish).
O’Hegarty, R., Kinnane, O., and McCormack, S. J. (2016). “Review and analysis of solar thermal facades.” Solar Energy, 135, 408–422.
Raposo, S., Fonseca, M., and de Brito, J. (2011). “Planned preventive maintenance activities: Analysis of guidance documents.” Proc., Int. Conf. on Durability of Building Materials and Components (XII DBMC), FEUP Edições, Porto (Portugal).
Remolá, R., and Paños, J. (2014). “Building information modeling (BIM).” Cercha, 119, 52–53 (in Spanish).
Sulakatko, V., Lill, I., Soekov, E., Arhipova, R., Witt, E., and Liisma, E. (2014). “Towards nearly zero-energy buildings through analyzing reasons for degradation of facades.” Procedia Econ. Finance, 18, 592–600.
Sung, D. (2016). “A new look at building facades as infrastructure.” Engineering, 2(1), 63–68.
Vieitez Chamosa, J. A., and Ramírez Ortiz, J. L. (1984). “The pathology of construction in Spain: A statistical approach.” Informes de la Construcción, 36(364), 5–15 (in Spanish).
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 22, 2017
Accepted: Oct 17, 2017
Published online: Feb 19, 2018
Published in print: Jun 1, 2018
Discussion open until: Jul 19, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.