On-Site Acoustic-Emission Monitoring for Assessment of a Prestressed Concrete Double-Tee-Beam Bridge without Plans
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 4
Abstract
Acoustic emission was used in this study to assess the condition of a simple-span, prestressed concrete bridge located in southern New Mexico during a proof test. The 40-year-old bridge is county owned and no design plans were available. Acoustic emission (AE) data were collected under several loading conditions from two groups of sensors placed near the support and midspan of an interior double-tee beam. Strain measurements were also taken at midspan and used to direct the test and determine the maximum loading. AE data analysis methods were applied to evaluate the response of the structure under increasing loads and to develop crack maps. Analysis of the AE data showed signs of internal beam microcrack development near the supports (shear region) as well as in the midspan (moment region). The AE data indicated that damage in the form of crack growth was more prevalent in the region near the supports.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This project was funded by the New Mexico DOT, grant number NM13STR01. The support is gratefully acknowledged.
References
AASHTO. (2011). Manual for bridge evaluation, 2nd Ed., Washington, DC.
AEwin version E4.30 [Computer software]. Princeton Junction, NJ, Mistras Group.
Aguilar, C., Jáuregui, D., Newtson, C., Weldon, B., and Cortez, T. (2015). “Load rating a prestressed concrete T-beam bridge without plans by proof testing.” Proc., TRB 2015 Annual Meeting, Transportation Research Board, Washington, DC.
ASTM. (2014). “Standard terminology for nondestructive examinations.”, West Conshohocken, PA.
Colombo, S., Main, I., and Forde, M. (2003). “Assessing damage of reinforced concrete beam using b- value analysis of acoustic emission signals.” J. Mater. Civ. Eng., 280–286.
ElBatanouny, M., Larosche, A., Mazzoleni, P., Ziehl, P., Matta, F., and Zappa, E. (2014a). “Identification of cracking mechanisms in scaled FRP reinforced concrete beams using acoustic emission.” Exp. Mech., 54(1), 69–82.
ElBatanouny, M., Larosche, A., Ziehl, P., and Yu, L. (2012). “Wireless acoustic emission monitoring on in situ decommissioning for nuclear structures.” 8th Int. Conf. on Nuclear Plant Instrumentation, Control, and Human-Machine Interface Technologies 2012 (NPIC & HMIT), 8.
ElBatanouny, M., Ziehl, P., Larosche, A., Mangual, J., Matta, F., and Nanni, A. (2014b). “Acoustic emission monitoring for assessment of prestressed concrete beams.” Constr. Build. Mater., 58, 46–53.
Farhidzadeh, A., Salamone, S., Dehgghan-Niri, E., Luna, B., and Whittaker, A. (2012). “Damage assessment of reinforced concrete shear walls by acoustic emission.” American Society of Nondestructive Testing Conf. Proc. NDE/NDT for Highways and Bridges, Structural Materials Technology, Columbus, OH, 74–81.
Fowler, T., Blessing, J., and Conlisk, P. (1989). “New directions in testing.” Proc., 3rd Int. Symp. on AE from Composite Materials, American Society of Nondestructive Testing, Columbus, OH, 16–27.
Golaski, L, Gebski, P., and Ono, K. (2002). “Diagnostics of reinforced concrete bridges by acoustic emission.” J. Acoust. Emission., 20, 83–98.
Hamdi, S., Le Duff, A., Simon, L., Plantier, G., Sourice, A., and Feuilloy, M. (2013). “Acoustic emission pattern recognition approach based on Hilbert-Huang transform for structural health monitoring in polymer-composite materials.” Appl. Acoust., 74(5), 746–757.
Jáuregui, D., Newtson, C., and Weldon, B. (2013). “Load rating bridges with no as-built plans or non-engineered bridges.”, New Mexico Dept. of Transportation, Research Bureau, Santa Fe, NM.
Nair, A., and Cai, C. (2010). “Acoustic emission monitoring of bridges: Review and case studies.” Eng. Struct., 32(6), 1704–1714.
Olaszek, P., Swit, G., and Casas, J. (2010). “Proof load testing supported by acoustic emission: An example of application.” Int. IABMAS Conf. on Bridge Maintenance, Safety, and Management, CRC Press, Philadelphia, 472–479.
Pollock, A. (1981). “Acoustic emission amplitude distributions.” Int. Adv. Nondestr. Test., 7, 215–239.
Shiotani, T., Ohtsu, M., and Ikeda, K. (2001). “Detection and evaluation of AE waves due to rock deformation.” Constr. Build. Mater., 15(5–6), 235–246.
Tinkey, B., Fowler, T., and Klingner, R. (2002). “Nondestructive testing of prestressed bridge girders with distributed damage.”, 106.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Nov 28, 2014
Accepted: May 15, 2015
Published online: Jul 15, 2015
Discussion open until: Dec 15, 2015
Published in print: Aug 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.