Sensitivity of Load Distribution in Light-Framed Wood Roof Systems due to Typical Modeling Parameters
Publication: Journal of Performance of Constructed Facilities
Volume 27, Issue 3
Abstract
Because failure of roof systems in past high wind events has demonstrated the consequences of not maintaining a continuous load path from the roof to the foundation, many studies have been conducted to better understand this load path, including how loads are distributed in the system. The current study looks to add to the current knowledge of the vertical load path by focusing on uplift loads and by considering the sensitivity of different modeling parameters. This is done by developing and assessing load influence coefficient contours for various roof-to-wall (RTW) connections. An analytical model of a light-framed wood structure using finite-element software is developed. The model has a gable roof system comprised of fink trusses and is modeled in a highly detailed fashion including the explicit modeling of each connector/nail in the system. The influence coefficient plots indicate that the distribution of loads is indeed sensitive to the overall stiffness of RTW connections but is not overly sensitive to their relative stiffnesses. This was investigated by looking at cases where all connections have the same stiffness and cases where they can have different stiffnesses. However, the relative stiffness begins to have a larger impact as they begin to soften because of yielding. Furthermore, the stiffness of the sheathing connectors did not appear to have much of an impact on the distribution of load, but the sheathing stiffness itself did have a notable impact.
Get full access to this article
View all available purchase options and get full access to this article.
References
ANSYS 12 [Computer software]. Canonsburg, PA, ANSYS.
Baskaran, A., and Dutt, O. (1997). “Performance of roof fasteners under simulated loading conditions.” J. Wind Eng. Ind. Aerodyn., 72, 389–400.
Cramer, S. M., Drozdek, J. M., and Wolfe, R. W. (2000). “Load sharing effects in light-frame wood-truss assemblies.” J. Struct. Eng., 126(12), 1388–1394.
Cramer, S. M., and Wolfe, R. W. (1989). “Load-distribution model for light-frame wood roof assemblies.” J. Struct. Eng., 115(10), 2603–2616.
Dao, T. N., and van de Lindt, J. W. (2008). “New nonlinear roof sheathing fastener model for use in finite-element wind load applications.” J. Struct. Eng., 134(10), 1668–1674.
Datin, P. L. (2010). “Structural load paths in low-rise, wood-framed structures.” Ph.D. thesis, Univ. of Florida, Gainesville, FL.
Datin, P. L., Mensah, A. F., and Prevatt, D. O. (2008). “Experimentally determined structural load paths in a 1/3-scale model of light-framed wood, rectangular building.” 2010 ASCE Structures Congress, ASCE, Reston, VA.
Doudak, G. (2005). “Field determination and modeling of load paths in wood lightframe structures.” Ph.D. thesis, McGill Univ., Montreal.
Edmonson, W. C., Schiff, S. D., and Nielson, B. G. (2012). “Behavior of light-framed wood roof-to-wall connectors using aged lumber and multiple connection mechanisms.” J. Perform. Constr. Facil., 26(1), 26–37.
Gupta, R. (2005). “System behavior of wood truss assemblies.” Prog. Struct. Eng. Mater., 7(4), 183–193.
Gupta, R., and Limkatanyoo, P. (2008). “Practical approach to designing wood roof truss assemblies.” Pract. Period. Struct. Des. Constr., 13(3), 135–146.
LaFave, K. D., and Itani, R. Y. (1992). “Comprehensive load distribution model for wood truss roof assemblies.” Wood Fiber Sci., 24(1), 79–88.
Li, Z., Gupta, R., and Miller, T. H. (1998). “Practical approach to modeling of wood truss roof assemblies.” Pract. Period. Struct. Des. Constr., 3(3), 119–124.
Liu, W.-F., and Bulleit, W. M. (1995). “Overload behavior of sheathed lumber systems.” J. Struct. Eng., 121(7), 1110–1118.
Mani, S. (1997). “Influence functions for evaluating design loads on roof-truss to wall connections in low-rise buildings.” M.S. thesis, Clemson Univ., Clemson, SC.
Martin, K. G. (2010). “Evaluation of system effects and structural load paths in a wood- framed structure.” M.S. thesis, Oregon State Univ., Corvallis, OR.
Melchers, R. E. (2001). Structural reliability analysis and prediction, 2nd Ed., Wiley, West Sussex, U.K.
Reed, T. D., Rosowsky, D. V., and Schiff, S. D. (1997). “Uplift capacity of light-frame rafter to top plate connections.” J. Archit. Eng., 3(4), 156–163.
Shanmugam, B. (2011) “Probabilistic assessment of roof uplift capacities in low-rise residential construction.” Ph.D. thesis, Clemson Univ., Clemson, SC.
Shanmugam, B., Nielson, B. G., and Prevatt, D. O. (2009). “Statistical and analytical models for roof components in existing light-framed wood structures.” Eng. Struct., 31(11), 2607–2616.
Shirazi, S. M. H., and Pang, W. (2011). “Propagation of aleatoric uncertainty in light-frame wood shear walls.” Proc., 11th Int. Conf. on Applications of Statistics and Probability in Civil Engineering, Swiss Federal Institute of Technology, Zurich, Switzerland.
Silva, A., and Gesualdo, F. A. R. (2005). “Numerical analysis of the boundary conditions of wooden shear walls in the light platform system.” Asian J. Civil Eng., 6(3), 113–126.
Taly, N. (2003). Loads and load paths in buildings: Principles of structural design, International Code Council, Country Club Hills, IL.
U.S. Census Bureau. (2010). 2010 population estimates, U.S. Dept. of Commerce, Economics and Statistics Administration, Washington, DC.
Van de Lindt, J. W., Graettinger, A., Gupta, R., Skaggs, T., Pryor, S., and Fridley, K. (2007). “Performance of wood frame structures during Hurricane Katrina.” J. Perform. Constr. Facil., 21(2), 108–116.
Wolfe, R. W., and LaBissoniere, T. (1991). “Structural performance of light-frame roof assemblies II. Conventional truss assemblies.” FPL-RP-499, Forest Products Laboratory, Madison, WI.
Information & Authors
Information
Published In
Journal of Performance of Constructed Facilities
Volume 27 • Issue 3 • June 2013
Pages: 222 - 234
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 22, 2011
Accepted: Dec 29, 2011
Published online: Jan 2, 2012
Published in print: Jun 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.