Murrah Building Collapse: Reassessment of the Transfer Girder
Publication: Journal of Performance of Constructed Facilities
Volume 26, Issue 4
Abstract
The bombing of the Alfred P. Murrah Federal Building caused a progressive collapse that consumed nearly one-half of the building, killing 168 people. The use of a transfer girder along the front face of the building is often cited as the prime reason for the severity of the incident, although this paper provides evidence that suggests the transfer girder may not have been responsible. A method of predicting column failures attributable to blast is introduced and used to accurately predict the column failure pattern observed during the forensic investigation. The frame was adjusted with the transfer girder replaced with a conventional beam column arrangement. The failure pattern of the reconfigured building indicates that the extent of the collapse would be largely unchanged. This finding has important implications for the design of buildings that may be subjected to accidental or malicious damage. It is argued that the other buildings have demonstrated an ability to survive similar incidents and that the Murrah Building was vulnerable because it combined a glazed facade with open-plan architecture, in addition to lacking alternative load paths capable of redistributing loads after multiple column failures.
Get full access to this article
View all available purchase options and get full access to this article.
References
Biggs, M. (1964). Introduction to structural dynamics. McGraw-Hill, New York.
British Standards Institute. (1997). “Structural use of concrete, part 1: Code of practise for design and construction.” BS 8110-1, London.
Byfield, M. P. (2006). “Behavior and design of commercial multistory buildings subjected to blast.” J. Perform. Constr. Facil.JPCFEV, 20(4), 324–329.
Byfield, M. P., and Paramasivam, S. (2007). “Catenary action in steel-framed buildings.” Struct. Buildings, 160(5), 247–257.
Chopra, A. K. (2001). Dynamics of structures: Theory and applications to earthquake engineering, Prentice Hall, Upper Saddle River, NJ.
Clough, R. W., and Penzien, J. (1995). Dynamics of structures, Computers and Structures, Berkeley.
Corley, W. G., Mlakar, P. F., Sozen, M. A., and Thornton, C. H. (1998). “The Oklahoma City bombing: Summary and recommendations for multihazard mitigation.” J. Perform. Constr. Facil.JPCFEV, 12(3), 100–112.
Craig, R. R. (1981). “Structural dynamics: An introduction to computer methods.” Wiley, New York.
Federal Emergency Management Agency Mitigation Directorate. (1996). “The Oklahoma City bombing: Improving building performance through multi-hazard mitigation.” FEMA-227, Washington, DC.
Federal Emergency Management Agency Mitigation Directorate. (2003). “Primer for design of commercial buildings to mitigate terrorist attacks.” FEMA-427, Jessup, MD.
McVay, M. K. (1988). “Spall damage of concrete structures.” U.S Army Engineer Waterways Experiment Station Technical Rep. SL-88-22, Vicksburg, MS.
Mlakar, P. F., Corley, W. G., Sozen, M. A., and Thornton, C. H. (1998). “The Oklahoma City bombing: Analysis of blast damage to the Murrah Building.” J. Perform. Constr. Facil.JPCFEV, 12(3), 113–119.
Paramasivam, S. (2008). “Protective design against disproportionate collapse of RC and steel framed structures.” Ph.D. thesis, Univ. of Southampton, Southampton, UK.
Sozen, M. A., Thornton, C. H., Mlakar, P. F., and Corley, W. G. (1998). “The Oklahoma City bombing: Structure and mechanisms of the Murrah Building.” J. Perform. Constr. Facil.JPCFEV, 12(3), 120–136.
U.S. Dept. of Defense. (1990). “Structures to resist the effects of accidental explosions.” TM5-1300, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jul 16, 2010
Accepted: Mar 10, 2011
Published online: Mar 12, 2011
Published in print: Aug 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.