Effects of Eccentricity on the Seismic Rehabilitation Performance of Nonseismically Detailed Interior Beamwide Column Joints
Publication: Journal of Composites for Construction
Volume 16, Issue 5
Abstract
In this paper, the effects of eccentricity on the effectiveness of carbon-fiber-reinforced polymer (CFRP) or glass-fiber-reinforced polymer (GFRP) in repairing the shear strength and ductility of nonseismically detailed beam-wide column joints have been evaluated. For this purpose, four (two concentric and two eccentric) full-scale nonseismically detailed interior beamwide column joints were used as control specimens. All four subassemblages were subjected to similar cyclic lateral displacement to provide the equivalent of severe earthquake damage. The damaged control specimens were then repaired by filling their cracks with epoxy and externally bonding them with CFRP sheets and GFRP sheets. These repaired specimens were then retested and their response histories were obtained. Hence, a total of eight specimens were tested: four control, and four repaired. The response histories of the control and repaired specimens were then compared. The results were compared through hysteretic loops, load-displacement envelopes, energy dissipation capacity, secant stiffness degradation, and shear strength and damage indices. Moreover, the effectiveness of the proposed repair schemes in repairing the eccentric and concentric joints was also compared. The present study demonstrates that proposed repair schemes can recover the performance of both damaged reinforced concrete (RC) concentric and eccentric beam-wide column joints effectively.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was made possible through the support of, and collaboration with, FYFE Asia Private Limited in Singapore.
References
Al-Salloum, Y. A., and Almusallam, T. H. (2007). “Seismic response of interior RC beam-column joints upgraded with FRP sheets. I: Experimental study.” J. Compos. Constr., 11(6), 575–589.
Alsayed, S. H., Al-Salloum, Y. A., Almusallam, T. H., and Siddiqui, N. A. (2010). “Seismic response of FRP-upgraded exterior RC beam-column joints.” J. Compos. Constr., 14(2), 195–208.
American Concrete Institute (ACI) Committee 318. (2008). “Building code requirements for structural concrete (ACI 318-08) and commentary (318R-08).” American Concrete Institute, Farmington Hills, MI, 433.
Balsamo, A., Manfredi, G., Mola, E., Negro, P., and Prota, A. (2005a). “Seismic rehabilitation of a full-scale RC structure using CFRP laminates.” ACI Struct. J., SP230-75, 1325–1344.
Balsamo, A., Manfredi, G., Mola, E., Negro, P., and Prota, A. (2005b). “Seismic rehabilitation of a full-scale RC frame repaired using CFRP laminates.” Eng. Struct., 27(5), 769–780.
British Standards Institution. (1997). “Code of practice for design and construction.”, Part 1, London.
Columb, F., Tobbi, H., Ferrier, E., and Hamelin, P. (2008). “Seismic retrofit of reinforced concrete short columns by CFRP materials.” Compos. Struct., 82(4), 475–487.
Construction Innovation. (2002). “Review of strengthening techniques using externally bonded fiber reinforced polymer composites: Decision support tools for concrete infrastructure rehabilitation.”, Brisbane, Australia, 67.
Cosenza, E., Manfredi, G., and Ramasco, R. (1993). “The use of damage functionals in earthquake engineering: A comparison between different methods.” Earthquake Eng. Struct. Dyn., 22(10), 855–868.
Di Ludovico, M., Prota, A., Manfredi, G., and Cosenza, E. (2008). “Seismic strengthening of an under-designed RC structure with FRP.” Earthquake Eng. Struct. Dyn., 37(1), 141–162.
El-Amoury, T., and Ghobarah, A. (2002). “Seismic rehabilitation of beam-column joint using GFRP sheets.” Eng. Struct., 24(11), 1397–1407.
Engindeniz, M., Kahn, L. F., and Zureick, A. H. (2005). “Repair and strengthening of reinforced concrete beam-column joints: State of the art.” Struct. J., 102(2), 187–197, 〈http://www.concrete.org/PUBS/JOURNALS/OLJDetails.asp?Home=SJ&ID=14269〉.
Engindeniz, M., Kahn, L. F., and Zureick, A. H. (2008a). “Performance of an RC corner beam-column joint severely damaged under bidirectional loading and rehabilitated with FRP composites.” ACI Struct. J., SP258-02, 19–36.
Engindeniz, M., Kahn, L. F., and Zureick, A. H. (2008b). “Pre-1970 RC corner beam-column-slab joints: Seismic adequacy and upgradability with CFRP composites.” 14th World Conference on Earthquake Engineering, International Association for Earthquake Engineering (IAEE), Tokyo, 12–17.
Eurocode 8. (2005). “Design of structures for earthquake resistance.”, London.
Gergely, I., Pantelides, C. P., Nuismer, R. J., and Reaveley, L. D. (1998). “Bridge pier retrofit using fiber-reinforced plastic composites.” J. Compos. Constr., 2(4), 165–174.
Gergely, I., Pantelides, C. P., Nuismer, R. J., and Reaveley, L. D. (2000). “Shear strengthening of RCT-joints using CFRP composites.” J. Compos. Constr., 4(2), 56–64.
Ghobarah, A., and Said, A. (2002). “Shear strengthening of beam-column joints.” Eng. Struct., 24(7), 881–888.
Karayannis, C. G., Chalioris, C. E., and Sideris, K. K. (1998). “Effectiveness of RC beam-column connection repair using epoxy resin injections.” J. Earthquake Eng., 2(2), 217–240.
Karayannis, C. G., Chalioris, C. E., and Sirkelis, G. M. (2008). “Local retrofit of exterior RC beam-column joints using thin RC jackets: An experimental study.” Earthquake Eng. Struct. Dyn., 37(5), 727–746.
Karayannis, C. G., and Sirkelis, G. M. (2002). “Effectiveness of RC beam-column connections strengthening using carbon-FRP jackets.” 12th World Conference on Earthquake Engineering, Proc. in CD form, PR 549.
Karayannis, C. G., and Sirkelis, G. M. (2008). “Strengthening and rehabilitation of RC beam-column joints using carbon-FRP jacketing and epoxy resin injection.” Earthquake Eng. Struct. Dyn., 37(5), 769–790.
Lawrance, G. M., Beattie, G. J., and Jacks, D. H. (1991). “The cyclic load performance of an eccentric beam-column joint.”, Central Laboratories, Lower Hutt, New Zealand.
Li, B., and Chua, H. Y. G. (2009). “Seismic performance of strengthened reinforced concrete beam-column joints using FRP composites.” J. Struct. Eng., 135(10), 1177–1190.
Li, B., and Kai, Q. (2011). “Seismic behavior of reinforced concrete interior beam-wide column joints repaired using FRP.” J. Compos. Constr., 15(3), 327–338.
Li, B., Wu, Y. M., and Pan, T. C. (2002). “Seismic behavior of nonseismically detailed interior beam-wide column joints—Part I: Experimental results and observed behavior.” Struct. J., 99(6), 791–802, 〈http://www.concrete.org/PUBS/JOURNALS/OLJDetails.asp?Home=SJ&ID=12344〉.
New Zealand Standards. (1995). “Concrete structures standard (1995). Part 1: The design of concrete structure.”, Wellington, New Zealand.
Park, Y. J., and Ang, H. S. (1985). “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng., 111(4), 722–739.
Pampanin, S., Bolognini, D., and Pavese, A. (2007). “Performance-based seismic retrofit strategy for existing reinforced concrete frame systems using fiber-reinforced polymer composites.” J. Compos. Constr., 11(2), 211–226.
Pauley, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete masonry buildings, Wiley, New York.
Shin, M., and LaFave, J. M. (2004). “Seismic performance of reinforced concrete eccentric beam-column connections with floor slabs.” Struct. J., 101(3), 403–412, 〈http://www.concrete.org/PUBS/JOURNALS/OLJDetails.asp?Home=SJ&ID=13100〉.
Tsonos, A. G. (1999). “Lateral load response of strengthened reinforced concrete beam-to-column joints.” Struct. J., 96(1), 46–56, 〈http://www.concrete.org/PUBS/JOURNALS/AbstractDetails.asp?ID=595〉.
Tsonos, A. G. (2008). “Effectiveness of CFRP-jackets and RC-jackets in post-earthquake and pre-earthquake retrofitting of beam-column subassemblages.” Eng. Struct., 30(3), 777–793.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Aug 23, 2011
Accepted: Jan 31, 2012
Published online: Feb 3, 2012
Published in print: Oct 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.