Normalized Confinement Stiffness Approach for Modeling FRP-Confined Concrete
Publication: Journal of Composites for Construction
Volume 16, Issue 5
Abstract
Passive confinement provided by fiber-reinforced polymer (FRP) jackets increases the compressive strength and axial deformation capacity of concrete. This study explains a normalized confinement stiffness approach to quantify the strength and strain increase of FRP-confined concrete using a previously proposed and most widely-used model for both active and passive confinement of concrete, and claims that these equations can still be used for FRP-confined concrete with very simple modifications. A comparison of the proposed model's accuracy to American Concrete Institute guidelines was made using experimental results reported in the literature. The proposed modified model was shown to be quite effective in predicting the increased strength and strain values of FRP-confined concrete, and was also modified for FRP-confined hollow concrete cylinders.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (2002). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.”, Farmington Hills, MI.
American Concrete Institute (ACI). (2008). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.”, Farmington Hills, MI.
Balmer, G. G. (1949). “Shearing strength of concrete under high triaxial stress–Computation of Mohr's envelope curve.”, U.S. Bureau of Reclamation Structure Research Lab, Denver.
Candappa, D. P., Setunge, S., and Sanjayan, J. G. (1999). “Stress versus strain relationship of high strength concrete under high lateral confinement.” Cem. Concr. Res., 29(12), 1977–1982.
Considère, A. (1906). Experimental researches on reinforced concrete, McGraw, New York, 242.
De Lorenzis, L., Micelli, F., and La Tegola, A. (2002). “Influence of specimen size and resin type on the behavior of FRP-confined concrete cylinders.” Advanced polymer composites for structural applications in construction, Thomas Telford, London, 231–239.
De Lorenzis, L., and Tepfers, R. (2001). “A comparative study of models on confinement of concrete cylinders with FRP composites.”, Dept. of Building Materials, Chalmers Univ. of Technology, Gothenburg, Sweden.
De Lorenzis, L., and Tepfers, R. (2003). “Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites.” J. Compos. Constr., 7(3), 219–237.
Elwi, A. A., and Murray, D. W. (1979). “A 3D hypoelastic concrete constitutive relationship.” J. Eng. Mech. Div., 105(4), 623–641.
Fam, A. Z., and Rizkalla, S. H. (2001). “Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes.” ACI Struct. J., 98(4), 451–461.
Gardner, N. J. (1969). “Triaxial behavior of concrete.” ACI J. Proc., 66(2), 136–158.
Harries, K. A., and Carey, S. A. (2003). “Shape and gap effects on the behaviour of variably confined concrete.” Cem. Concr. Res., 33(6), 881–890.
Howie, I., and Karbhari, V. M. (1994). “Effect of materials architecture on strengthening efficiency of composite wraps for deteriorating columns in the North-East.” Proc., 3rd Materials Engineering Conf., ASCE, New York, 199–206.
Imran, I., and Pantazopoulou, S. J. (1996). “Experimental study of plain concrete under triaxial stress.” ACI Mater. J., 93(6), 589–601.
Jiang, T., and Teng, J. G. (2007). “Analysis-oriented stress-strain models for FRP-confined concrete.” Eng. Struct., 29(11), 2968–2986.
Lam, L., and Teng, J. G. (2003a). “Design-oriented stress-strain model for FRP-confined concrete.” Constr. Build. Mater., 17(6–7), 471–489.
Lam, L., and Teng, J. G. (2003b). “Design oriented stress-strain model for FRP-confined concrete in rectangular columns.” J. Reinf. Plast. Compos., 22(13), 1149–1186.
Lam, L., and Teng, J. G. (2004). “Ultimate condition of fiber reinforced polymer-confined concrete.” J. Compos. Constr., 8(6), 539–548.
Lam, L., Teng, J. G., Cheung, C. H., and Xiao, Y. (2006). “FRP-confined concrete under axial cyclic compression.” Cem. Concr. Compos., 28(10), 949–958.
Lan, S., and Guo, Z. (1997). “Experimental investigation of multiaxial compressive strength of concrete under different stress paths.” ACI Mater. J., 94(5), 427–434.
Lignola, G. P., Prota, A., Manfredi, G., and Cosenza, E. (2008). “Unified theory for confinement of RC solid and hollow circular columns.” Compos. Part B, 39(7–8), 1151–1160.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988a). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988b). “Observed stress-strain behavior of confined concrete.” J. Struct. Eng., 114(8), 1827–1849.
Matthys, S. (2001). “Structural behavior and design of concrete members strengthened with externally bonded FRP reinforcement.” Ph.D. thesis, Ghent Univ., Ghent, Belgium.
Matthys, S., Taerwe, L., and Audenaert, K. (1999). “Tests on axially loaded concrete columns confined by fiber reinforced polymer sheet wrapping.” Proc., 4th. Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, American Concrete Institute, Farmington, MI, 217–229.
Modarelli, R., Micelli, F., and Manni, O. (2005). “FRP-confinement of hollow concrete cylinders and prisms.” Proc., 7th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, American Concrete Institute, Farmington, MI, 1–18.
Pessiki, S., Harries, K. A., Kestner, J., Sause, R., and Ricles, J. M. (2001). “The axial behavior of concrete confined with fiber reinforced composite jackets.” J. Compos. Constr., 5(4), 237–245.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1928). “A study of the failure of concrete under combined compressive stresses.”, Univ. of Illinois Engineering Experimental Station, Urbana-Champaign, IL.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1929). “The failure of plain and spirally reinforced concrete in compression.”, Univ. of Illinois Engineering Experimental Station, Urbana-Champaign, IL.
Rochette, P., and Labossiere, P. (2000). “Axial testing of rectangular column models confined with composites.” J. Compos. Constr., 4(3), 129–136.
Sfer, D., Carol, I., Gettu, R., and Etse, G. (2002). “Study of the behavior of concrete under triaxial compression.” J. Eng. Mech., 128(2), 156–163.
Smith, S. S., Willam, K. J., Gerstle, K. H., and Sture, S. (1989). “Concrete over the top: Is there life after peak?” ACI Mater. J., 86(5), 491–497.
Spoelstra, M. R., and Monti, G. (1999). “FRP-confined concrete model.” J. Compos. Constr., 3(3), 143–150.
Tasdemir, M. A., Tasdemir, C., Jefferson, A. D., Lydon, F. D., and Barr, B. I. G. (1998). “Evaluation of strains at peak stresses in concrete: A three-phase composite model approach.” Cem. Concr. Compos., 20(4), 301–318.
Watanabe, S. et al. (1997). “Confinement effect of FRP sheet on strength and ductility of concrete cylinders under uniaxial compression.” 3rd Int. Symp. of the Japan Concrete Institute, Tokyo, Japan, 233–240.
Xiao, Y., and Wu, H. (2000). “Compressive behavior of concrete confined by carbon fiber composite jackets.” J. Mater. Civil Eng., 12(2), 139–146.
Xie, J., Elwi, A E, and MacGregor, J. G. (1995). “Mechanical properties of three high strength concretes containing silica fume.” ACI Mater. J., 92(2), 135–145.
Yazici, V., and Hadi, M. N. S. (2009). “Axial load-bending moment diagrams of carbon FRP wrapped hollow core reinforced concrete columns.” J. Compos. Constr., 13(4), 262–268.
Zahn, F. A., Park, R., and Priestley, M. J. N. (1990). “Flexural strength and ductility of circular hollow reinforced concrete columns without confinement on inside face.” ACI Struct. J., 87(2), 156–166.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jul 4, 2011
Accepted: Jan 31, 2012
Published online: Feb 3, 2012
Published in print: Oct 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.