Prestress Losses and Flexural Behavior of Reinforced Concrete Beams Strengthened with Posttensioned CFRP Sheets
Publication: Journal of Composites for Construction
Volume 16, Issue 2
Abstract
An experimental study was conducted to investigate the flexural behavior and long-term prestress losses of reinforced concrete (RC) beams strengthened with posttensioned carbon fiber-reinforced polymer (CFRP) sheets. The experimental program consisted of tensile tests of flat CFRP coupons under sustained loads and flexural tests of a total of eight RC beams: six strengthened with posttensioned CFRP sheets, one strengthened with nonprestressed CFRP sheets, and one control beam. The main objective of the tests was to gain a better understanding of the long-term prestress losses of CFRP sheets in the posttensioned system under different prestress levels and strengthening ratios. It is shown that the prestress losses of CFRP sheets in the posttension system are mainly attributable to anchorage set (approximately 12.6 to 18.2% of the initial prestress), whereas the time-dependent losses caused by creep and shrinkage of concrete and relaxation of CFRP sheets are relatively small (approximately 2.3 to 3.9% of the initial prestress).
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by the National Nature Science Foundation of China (Project code: 51078079). In addition, the authors wish to thank the University of Pittsburgh for the opportunity for research collaboration.
References
Abhijit, M., and Gopal, L. R. (2009). “Performance of reinforced concrete beams externally prestressed with fiber composites.” Constr. Build. Mater.CBUMEZ, 23(2), 822–828.
American Association of State Highway and Transportation Officials, (AASHTO). (2005). AASHTO LRFD bridge design specifications, 5th Ed., Washington, DC.
American Concrete Institute (ACI). (2008). ACI 440.2R-08 guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, Farmington Hills, MI.
Aram, M. R., Czaderski, C., and Motavalli, M. (2008), “Effects of gradually anchored prestressed CFRP strips bonded on prestressed concrete beams.” J. Compos. Constr., JCCOF212(1), 25–34.
Canadian Standard Association (CSA). (2002). CSA 806-02 design and construction of building components with fiber reinforced polymers, Ottawa.
China Association for Engineering Construction Standardization (CECS). (2007). CECS 146 technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate, Beijing Planning Press, Beijing (in Chinese).
China National Standardization Management Committee (CNSMC). (1999). Chinese test method for the directional tensile properties of oriented fiber reinforced plastics, Beijing Planning Press, Beijing (in Chinese).
Czaderski, C., and Motavalli, M. (2007). “40-year-old full-scale concrete bridge girder strengthened with prestressed CFRP plates anchored using gradient method.” Composites Part BCPBEFF, 38(7–8), 878–886.
Diab, H., and K., Iwashita (2009). “Short and long-term bond performance of prestressed FRP sheet anchorages.” Eng. Struct.ENSTDF, 31(5), 1241–1249.
Dolan, C. W., Hamilton, H. R., Bakis, C. E., and Nanni, A. (2001). “Design recommendations for concrete structures prestressed with FRP tendons.” FHWA-DTFH61-96-C-00019, Federal Highway Administration, Washington, DC.
El-Hacha, R., Green, M. F., and Wight, R. G. (2003). “Innovative system for prestressing fiber-reinforced polymer sheets.” ACI Struct. J.ASTJEG, 100(3), 305–313.
El-Hacha, R., Wight, R. G., and Green, M. F. (2001). “Prestressed fibre-reinforced polymer laminates for strengthening structures.” Prog. Struct. Eng. Mater., 32, 111–121.
El-Hacha, R., Wight, R. G., and Green, M. F. (2004). “Prestressed carbon fiber reinforced polymer sheets for strengthening concrete beams at room and low temperatures.” J. Compos. Construct. JCCOF2, 8(1), 3–13.
Fischli, F., Clénin, R., De Silva, A., and Chaemmangkang, P. (2007). “Strengthening of structures with the CARBOSTRESS system.” Proc. of the First Asia-Pacific Conf. on FRP in Structures (APFIS 2007), International Institute for FRP in Construction, Hong Kong, 387–392.
Garden, H. N., and Hollaway, L. C. (1998). “An experimental study of the failure modes of reinforced concrete beams strengthened with prestressed carbon composite plates.” Composites Part B CPBEFF, 29(4), 411–424.
Harries, K. A., Wang, W., and Dai, J.-G. (2012). “Capacity development of externally bonded CFRP subject to oscillating loads during resin cure.” Proc. of the Asia-Pacific Conf. on FRP in Structures (APFIS), International Institute for FRP in Construction, Sapporo, Japan.
International Federation for Structural Concrete. (2001). “Externally bonded FRP reinforcement for RC structures.” Bulletin No. 14, Lausanne, Switzerland.
ISIS Canada. (2001). “Strengthening reinforced concrete structures with externally bonded fibre reinforced polymers.” Design Manual No. 4. Winnipeg, Canada.
Izumo, K., Saeki, N., Asamizu, T., and Shimura, K. (1997). “Strengthening reinforced concrete beams by using prestressed fibre sheets.” Proc. of 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures, Vol. 1, Japan Concrete Institute, Tokyo, 379–386.
Japan Society of Civil Engineers (JSCE). (2001). Recommendations for upgrading of concrete structures with use of continuous fibers sheets, Tokyo.
Kasan, J., and Harries, K. A. (2009). “Repair of impact-damaged prestressed concrete bridge girders with CFRP.” Proc. of the Asia-Pacific Conf. on FRP in Structures (APFIS 2009), International Institute for FRP in Construction, Seoul, 157–162.
Kim, Y. J., Green, M. F., and Wight, R. G. (2007). “Flexural behavior of reinforced and prestressed concrete beams including strengthening with prestress carbon fibre reinforced polymer sheets: Application of a fracture mechanics method.” Can. J. Civ. Eng.CJCEB8, 34(5), 664–677.
Kim, Y. J., Green, M. F., and Wight, R. G. (2010). “Bond and short-term prestress losses of prestressed composites for strengthening PC beams with integrated anchorage.” J. Reinf. Plast. Compos.JRPCDW, 29(9), 1277–1294.
Kim, Y. J., Wight, R. G., and Green, M. F. (2008). “Flexural strengthening of RC beams with prestressed CFRP sheets: Development of nonmetallic anchor systems.” J. Compos. Construct.JCCOF2, 12(1), 35–43.
Meier, U. (1995). ‘‘Strengthening of structures using carbon fibre/epoxy composites.’’ Constr. Build. Mater., 9(6), 341–351.CBUMEZ
Meier, U., Deuring, M., Meier, H., and Schwegler, G. (1992). “Strengthening of structures with CFRP laminates: Research and applications in Switzerland.” Proc., 1st Int. Conf. on Advanced Composite Materials in Bridges and Structures, Canadian Society for Civil Engineering, Montreal, 243–251.
Mukherjee, A., and Rai, G. L. (2009). “Performance of reinforced concrete beams externally prestressed with fiber composites.” Constr. Build. Mater., 23(2), 822–828.CBUMEZ
Nordin, H., and Täljsten, B. (2006). “Concrete beams strengthened with prestressed near surface mounted CFRP.” J. Compos. Construct.JCCOF2, 10(1), 60–68.
Pellegrino, C., and Modena, C. (2009). “Flexural strengthening of real-scale RC and PRC beams with end-anchored pretensioned FRP laminates.” ACI Struct. J.ASTJEG, 106(3), 319–328.
Pessiki, S., Harries, K. A., Kestner, J., Sause, R., and Ricles, J. M. (2001). “The axial behavior of concrete confined with fiber reinforced composite jackets.” J. Compos. Construct.JCCOF2, 5(4), 237–245.
Quantrill, R. J. and Hollaway, L. C. (1998). “The flexural rehabilitation of reinforced concrete beams by the use of prestressed advanced composite plates.” Compos. Sci. Technol., 58(8), 1259–1275.
Rosenboom, O. A., and Rizkalla, S. H. (2005). “Fatigue behavior of prestressed concrete bridge girders strengthened with various CFRP systems.” Proc. of the 7th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-7), American Concrete Institute, Farmington Hills, MI, 597–612.
Shahawy, M. A., Arochiasamy, M., Beitelman, T., and Sowrirajan, R. (1996). “Reinforced concrete rectangular beams strengthened with CFRP laminates.” Composites, Part BCPBEFF, 273–4, 225–233.
Stöcklin, I., and Meier, U. (2003). “Strengthening of concrete structures with prestressed and gradually anchored CFRP strips.” Proc. of the 6th Int. Symp. Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-6), World Scientific, Singapore, 1321–1330.
Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2002). FRP strengthened RC structures. Wiley, Chichester, UK.
Triantafillou, T. C., and Deskovic, N. (1991). “Innovative prestressing with FRP sheets: Mechanics of short-term behavior.” J. Eng. Mech.JENMDT, 117(7), 1652–1672.
Triantafillou, T. C., Deskovic, N., and Deuring, M. (1992). “Strengthening of concrete structures with prestressed fiber reinforced plastic sheets.” ACI Struct. J.ASTJEG, 89(3), 235–244.
Wang, W. W., and Li, G. (2006). “Experimental study and analysis of RC beams strengthened with CFRP laminates under sustaining load.” Int. J. Solids Struct., 43(6), 1372–1387.IJSOAD
Wight, R. G., Green, M. F., and Erki, M. A. (2001). “Prestressed FRP sheets for post strengthening reinforced concrete beams.” J. Compos. Construct.JCCOF2, 5(4), 214–220.
Woo, S. K., Nam, J. W., Kim, H. J., Han, S. H., and Byun, K. J. (2008). “Suggestion of flexural capacity evaluation and prediction of prestressed CFRP strengthened design.” Eng. Struct., 30(12), 3751–3763.ENSTDF
Wu, Z. S., Iwashita, K., Hayashi, K., Higuchi, T., Murakami, S., and Yoseki, Y. (2003). “Strengthening prestressed-concrete girders with externally prestressed PBO fiber reinforced polymer sheets.” J. Reinf. Plast. Compos.JRPCDW 22(14), 1269–1286.
Xue, W. Tan, Y., and Zeng, L. (2010). “Flexural response predictions of reinforced concrete beams strengthened with prestressed CFRP plates.” Compos. Struct.COMSE2, 92(3), 612–622.
Yang, D. S., Park, S. K., and Neale, K. W. (2009). “Flexural behaviour of reinforced concrete beams strengthened with prestressed carbon composites.” Compos. Struct.COMSE2, 88(4), 497–508.
Yu, P., Silva, P. F., and Nanni, A. (2004). “Flexural performance of RC beams strengthened with prestressed CFRP sheets.” Proc. Society for the Advancement of Material and Process Engineering 2004 Symp., Covina, CA.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jun 14, 2011
Accepted: Sep 21, 2011
Published online: Sep 23, 2011
Published in print: Apr 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.