Evaluation of Bond Strength in Concrete Elements Externally Reinforced with CFRP Sheets and Anchoring Devices
Publication: Journal of Composites for Construction
Volume 14, Issue 5
Abstract
Use of anchoring devices can be useful to avoid or delay end debonding failure in reinforced concrete elements externally bonded with fiber-reinforced plastic materials. Many theoretical formulations are now available to predict bond strength, but no design provisions have been suggested to take into account the beneficial effect of anchorage devices. This paper presents the results of experimental bond tests performed on concrete blocks externally strengthened with carbon fiber sheets. The prime focus is the evaluation of effect given by three different types of anchorage systems upon increasing debonding load. A simple model is introduced to predict the influence of the examined anchorage systems on the debonding load. Its accuracy is confirmed by comparisons with the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alessandri, S., Ceroni, F., Monti, G., and Pecce, M. (2008). “Homogenizing the procedures for developing debonding strength capacity models.” Proc., Challenges for Civil Construction, CCC2008 (CD-ROM), T. Marques, et al., eds., FEUP, Porto, Portugal.
Antoniades, K. A., Salonikios, T. N., and Kappos, A. J. (2005). “Tests on seismically damaged R/C walls repaired and strengthened using FRPs.” J. Compos. Constr., 9(3), 236–246.
Camli, U. S., and Binici, B. (2007). “Strength of carbon fiber reinforced polymers bonded to concrete and masonry.” Constr. Build. Mater., 21, 1431–1446.
Ceroni, F. (2010). “Experimental performances of RC beams strengthened with FRP materials.” Constr. Build. Mater., 24, 1547–1559.
Ceroni, F., and Pecce, M. (2002). “Bond behaviour of R.C. elements externally reinforced with FRP laminates.” Proc., Int. Symp. “Bond in Concrete—From Research to Standards,” G. Balazs, ed., Publishing Company of Budapest Univ. of Technology and Economics, Budapest, Hungary, 622–629.
Ceroni, F., and Pecce, M. (2007). “Bond performance in concrete elements strengthened with CFRP sheets.” Proc., 8th Int. Symp. on Fiber-Reinforced Polymer Reinforcement for Concrete Structures—FRP RCS–8 (CD-ROM), T. Triantafillou, ed.
Ceroni, F., Pecce, M., Matthys, S., and Taerwe, L. (2008). “Bond tests on concrete elements with CFRP and anchorage systems.” Composites, Part B, 39, 429–441.
Chen, J. F., and Teng, J. G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” J. Struct. Eng., 127(7), 784–791.
De Lorenzis, L., and Teng, J. G. (2007). “Near-surface mounted FRP reinforcement: An emerging technique for structural strengthening.” Composites, Part B, 38, 119–143.
European Committee for Standardization (CEN). (1993). “Eurocode: Basis of structural design.” Eurocode 0, Brussels, Belgium.
European Committee for Standardization (CEN). (2004). “Design of concrete structures—Part 1-1: General rules and rules for buildings.” Eurocode 2, Brussels, Belgium.
fib. (2001). “Externally bonded reinforcement of R.C. structures: Bulletin 14.” Technical Rep. on the Design and Use of Externally Bonded Fiber-Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures, Federation international du Beton (fib), Lausanne, Switzerland.
Hall, J. D., Schuman, H. R., and Hamilton, H. R. I. I. I. (2002). “Ductile anchorage for connecting FRP strengthening of under reinforced masonry building.” J. Compos. Constr., 6(1), 3–10.
Jansze, W. (1997). “Strengthening of reinforced concrete members in bending by externally bonded steel plates.” Ph.D. dissertation, TU Delft, Delft, The Netherlands.
Karantzikis, M., Papanicolaou, C. G., Antonopoulos, C. P., and Triantafillou, T. C. (2005). “Experimental investigation of non-conventional confinement for concrete using FRP.” J. Compos. Constr., 9(6), 480–487.
Khalifa, A., Belarbi, A., and Nanni, A. (2000). “Shear performance of RC members strengthened with externally bonded FRP wraps.” Proc., 12th WCEE Conf. (CD-ROM).
Kim, Y. J., Wight, R. G., and Green, M. F. (2008). “Flexural strengthening of RC beams with prestressed CFRP sheets: Using nonmetallic anchor systems.” J. Compos. Constr., 12(1), 44–52.
Kobayashi, K., Fujii, S., Yabe, Y., Tsukagoshi, H., and Sugiyama, T. (2001). “Advanced wrapping system with CF anchor-stress transfer mechanism of CF anchor.” Proc., 5th Int. Symp. on Fiber-Reinforced Plastics for Reinforcement for Concrete Structures—FRP RCS-5, C. Burgoyne, ed., Thomas Telford, London, 379–388.
Mazzotti, C., Savoia, M., and Ferracuti, B. (2005). “A new set-up for FRP-concrete stable delamination test.” Proc., 7th Int. Conf. on Fiber-Reinforced Plastics for Reinforced Concrete Structures—FRP RCS-7, C. K. Shield, and J. P. Busel, eds., 165–180.
McSweeney, B. M., and Lopez, M. M. (2005). “A parametric study through pull-off testing.” Proc., 7th Int. Conf. on Fiber-Reinforced Plastics for Reinforced Concrete Structures—FRP RCS-7, C. K. Shield and J. P. Busel, eds., 441–460.
Nagy-Gyorgy, T., Mosoarca, M., Stoian, V., Gergely, J., and Dan, D. (2005). “Retrofit of reinforced concrete shear walls with CFRP composites.” Proc., fib Symp. “Keep Concrete Attractive,” G. Balazs and A. Borosnyoi, eds., Publishing Company of Budapest Univ. of Technology and Economics, Budapest, Hungary, 897–902.
Oehlers, D. J., Liu, I. S. T., Seracino, R., and Mohamed Ali, M. S. (2004). “Prestress model for shear deformation debonding of FRP- and steel-plated RC beams.” Mag. Concrete Res., 56(8), 475–486.
Orton, S. L., Jirsa, J. O., and Bayrak, O. (2008). “Design considerations of carbon fiber anchors.” J. Compos. Constr., 12(6), 608–616.
Özdemir, G. (2005). “Mechanical properties of CFRP anchorages.” M.S. thesis, Middle East Technical Univ., Istanbul Turkey.
Prota, A., Manfredi, G., Balsamo, A., Nanni, A., and Cosenza, E. (2005). “Innovative technique for seismic upgrade of RC square columns.” Proc., 7th Int. Conf. on Fiber-Reinforced Plastics for Reinforced Concrete Structures—FRP RCS-7, C. K. Shield and J. P. Busel, eds., 1289–1305.
Prota, A., Nanni, A., Manfredi, G., and Cosenza, E. (2004). “Selective upgrade of undersigned reinforced concrete beam-column joints using carbon fiber reinforced polymers.” ACI Struct. J., 101(5), 699–707.
Savoia, M., Bilotta, A., Ceroni, F., DiLudovico, M., Fava, G., Ferracuti, B., Mazzotti, C., Nigro, E., Olivito, R., Pecce, M., Poggi, C. (2009). “Experimental round robin test on FRP concrete bonding.” Proc., 9th Int. Conf. on Fiber-Reinforced Plastics for Reinforced Concrete Structures—FRP RCS-9 (CD-ROM).
Tan, K. H., Patoary, M. K. H., and Roger, C. S. K. (2003). “Anchorage systems for masonry walls strengthened with FRP composite laminates.” J. Reinf. Plast. Compos., 22(15), 1353–1371.
Teng, J. G., and Yao, J. (2007). “Plate end debonding in FRP-plated RC beams—II: Strength model.” Eng. Struct., 29, 2472–2486.
Toutanji, H., Saxena, P., Zhao, L., and Ooi, T. (2007). “Prediction of interfacial bond failure of FRP—Concrete surface.” J. Compos. Constr., 11(4), 427–436.
Yao, J., Teng, J. G., and Chen, J. F. (2005). “Experimental study on FRP-to-concrete bonded joints.” Composites, Part B, 36, 99–113.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Dec 15, 2008
Accepted: Mar 1, 2010
Published online: Mar 3, 2010
Published in print: Oct 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.