Are Available Models Reliable for Predicting the FRP Contribution to the Shear Resistance of RC Beams?
Publication: Journal of Composites for Construction
Volume 13, Issue 6
Abstract
In this paper the trustworthiness of the existing theory for predicting the fiber-reinforced plastic contribution to the shear resistance of reinforced concrete beams is discussed. The most well-known shear models for external bonded reinforcement are presented, commented on, and compared with an extensive experimental database. The database contains the results from more than 200 tests performed in different research institutions across the world. The results of the comparison are not very promising and the use of the additional principle in the actual shear design equations should be questioned. The large scatter between the predicted values of different models and experimental results is of real concern bearing in mind that some of the models are used in present design codes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
G. S., B. T., and A. C. acknowledge the financial assistance of the European Union for the Marie Curie Research Training Network En-Core. J. B. and J. L. acknowledge the support provided by the research program “SmartReinforcement—Carbon fiber laminates for the strengthening and monitoring of reinforced concrete structures” supported by ADI-IDEIA Grant No. UNSPECIFIED13-05-04-FDR-00031.
References
Adhikary, B. B., Mutsuyoshi, H., and Ashraf, M. (2004). “Shear strengthening of reinforced concrete beams using fiber-reinforced polymer sheets with bonded anchorage.” ACI Struct. J., 101(5), 660–668.
American Concrete Institute (ACI) Committee. (2002). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-02, Farmington Hills, Mich., 45.
American Concrete Institute (ACI) Committee. (2005). “Building code requirements for structural concrete (ACI 318-05) and commentary (318R-05).” ACI 318, Farmington Hills, Mich., 430.
Brosens, K., and van Gemert, D. (1997). “Anchoring stresses between concrete and carbon fibre reinforced laminates.” Non-Metallic (FRP) Reinforcement for Concrete Struct., Proc., 3rd Int. Symp., Vol. 1, Japan Concrete Institute, Sapporo, 271–278.
Cao, S. Y., Chen, J. F., Teng, J. G., Hao, Z., and Chen, J. (2005). “Debonding in RC beams shear strengthened with complete FRP wraps.” J. Compos. Constr., 9(5), 417–428.
Carolin, A. (2003) “Carbon fiber reinforced polymers for strengthening of structural elements.” Ph.D. thesis, Luleå Univ. of Technology, Luleå, 18.
Carolin, A., and Täljsten, B. (2005). “Theoretical study of strengthening for increased shear bearing capacity.” J. Compos. Constr., 9(6), 497–506.
Chaallal, O., Nollet, M. -J., and Perraton, D. (1998). “Strengthening of reinforced concrete beams with externally bonded fibre-reinforced-plastic plates: Design guidelines for shear and flexure.” Can. J. Civ. Eng., 25, 692–708.
Chen, J. F., and Teng, J. G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” J. Struct. Eng., 127(7), 784–791.
Chen, J. F., and Teng, J. G. (2003a). “Shear capacity of fibre-reinforced polymer-strengthened reinforced concrete beams: Fibre reinforced polymer rupture.” J. Struct. Eng., 129(5), 615–625.
Chen, J. F., and Teng, J. G. (2003b). “Shear capacity of FRP-strengthened RC beams: FRP debonding.” Constr. Build. Mater., 17, 27–41.
Consiglio Nazionale delle Ricerche (CNR). (2005). “Instructions for design, execution and control of strengthening interventions through fiber-reinforced composites.” CNR-DT 200/04, Consiglio Nazionale delle Ricerche, Rome, Italy (in English).
Deniaud, C., and Cheng, J. J. R. (2001). “Shear behaviour of reinforced concrete T-beams with externally bonded fibre-reinforced polymer sheets.” ACI Struct. J., 98(3), 386–394.
Deniaud, C., and Cheng, J. J. R. (2004). “Simplified shear design method for concrete beams strengthened with fibre reinforced polymer sheets.” J. Compos. Constr., 8(5), 425–433.
Dias, S. J. E., and Barros, J. A. O. (2008). “Shear strengthening of T cross section reinforced concrete beams by near surface mounted technique.” J. Compos. Constr., 12(3), 300–311.
European Standard (EN). (2004). “Eurocode 2: Design of concrete structures.” B-1050, Brussels.
fib Bulletin 14. (2001). Externally bonded FRP reinforcement for RC structures, CH-1015, Lausanne.
Khalifa, A., Gold, W., Nanni, A., and Abdel Aziz, M. J. (1998). “Contribution of externally bonded FRP to shear capacity of RC flexural members.” J. Compos. Constr., 2(4), 195–202.
Khalifa, A., and Nanni, A. (2000). “Improving shear capacity of existing RC T-section beams using CFRP composites.” Cem. Concr. Compos., 22(3), 165–174.
Lima, J. L. T., and Barros, J. A. O. (2007)”Design models for shear strengthening of reinforced concrete beams with externally bonded FRP composites: a statistical vs. reliability approach.” Proc. FRPRCS-8 (CD-ROM), Thanasis C. Triantafillou ed., University of Patras, Patras, Greece.
Loov, R. E. (1998). “Review of A23.3–94 simplified method of shear design and comparison with results using shear friction.” Can. J. Civ. Eng., 25, 437–450.
Lu, X. Z. (2004). “Studies of the FRP-concrete interface.” Ph.D. thesis, Tsinghua University, Beijing, China.
Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y. (1997). “A study on bond mechanism of carbon fiber sheet.” Proc., Third Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), Vol. 1, 279–286.
Malek, A. M., and Saadatmanesh, H. (1998a). “Analytical study of reinforced concrete beams strengthened with web bonded fibre reinforced plastic plates or fabrics.” ACI Struct. J., 95(3), 343–352.
Malek, A. M., and Saadatmanesh, H. (1998b). “Ultimate shear capacity of reinforced concrete beams strengthened with web-bonded fibre reinforced plastic plates.” ACI Struct. J., 95(4), 391–399.
Miller, B. D. (1999). “Bond between carbon fiber reinforced polymer sheets and concrete.” MSc thesis, Dept. of Civil Engineering, The Univ. of Missouri, Rolla, Mo.
Monti, G., and Liotta, M. A. (2007). “Tests and design equations for FRP-strengthening in shear.” Constr. Build. Mater., 21, 799–809.
Oehlers, D. J., Seracino, R., and Smith, S. (2008). Design handbook for RC structures retrofitted with FRP and metal plates: Beams and slabs, Standards Australia Sydney, Australia, NSW 2001.
Pellegrino, C., and Modena, C. (2002). “Fiber reinforced polymer shear strengthening of reinforced concrete beams with transverse steel reinforcement.” J. Compos. Constr., 6(2), 104–111.
Pellegrino, C., and Modena, C. (2006). “Fibre-reinforced polymer shear strengthening of reinforced concrete beams: Experimental study and analytical modeling.” ACI Struct. J., 103(5), 720–728.
Popov, E. G. (1998). Engineering mechanics of solids, 2nd Ed., Prentice-Hall, Upper Saddle River, N.J.
Täljsten, B. (1994). “Plate bonding: Strengthening of existing concrete structures with epoxy bonded plates of steel or fibre reinforced plastics.” Ph.D. thesis, Luleå Univ. of Technology, Sweden.
Täljsten, B. (2003). “Strengthening concrete beams for shear with CFRP sheets.” Constr. Build. Mater., 17, 15–26.
Täljsten, B. (2006) “FRP strengthening of existing concrete structures.” Design guideline, 4th Ed., Luleå University Printing Office, Luleå.
Triantafillou, T. C. (1998). “Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites.” ACI Struct. J., 95(2), 107–115.
Triantafillou, T. C., and Antonopoulos, C. P. (2000). “Design of concrete flexural members strengthened in shear with FRP.” J. Compos. Constr., 4(4), 198–205.
Ye, L. P., Lu, X. Z., and Chen, J. F. (2005). “Design proposals for debonding strengths of FRP strengthened RC beams in the Chinese Design Code.” Proc., Int. Symp. on Bond Behaviour of FRP in Structures, International Institute for FRP in Construction (IIFC), Hong Kong, China.
Zhang, Z., and Hsu, C. -T. T. (2005). “Shear strengthening of reinforced concrete beams using carbon-fibre-reinforced polymer laminates.” J. Compos. Constr., 9(2), 158–169.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 6, 2008
Accepted: Apr 14, 2009
Published online: Nov 13, 2009
Published in print: Dec 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.