Parametric Study on the Structural Behavior and Failure Mechanism of Skewed Inverted-T Bent Caps
Publication: Journal of Bridge Engineering
Volume 25, Issue 11
Abstract
In the past several decades, the inverted-T bent caps (ITBCs) have been frequently used as an innovative type of bridge superstructure worldwide. In some specimens, the bent caps have to be skewed to meet the landscaping requirements. However, the traditional design of ITBC simply flares the transverse shear reinforcements out in skewed ITBCs, which brings significant inconvenience. In order to reduce the construction cost, an alternative skew arrangement with all the reinforcement arranged in parallel throughout the bent cap is recently adopted by Texas Department of Transportation (TxDOT). To investigate the feasibility of this technique, the shear reinforcement arrangement, as well as three other major parametric variations: shear reinforcement spacing, skew angle, and loading position, are studied regarding their effects on the behavior of skewed ITBCs. A total of 17 numerical models are simulated, among which three specimens are verified and validated by experimental results. The same modeling scheme and material parameters are applied to the remaining specimens. The analytical results indicate that the load–displacement curves of ITBCs are not notably changed by the proposed skew reinforcement arrangement, while the reinforcement spacing affects the ultimate capacity and ductility to a limited extent. The increase of the skew angle significantly affects the performance and failure modes. Meanwhile, a modified practical equation for the edge extension length of skewed ITBCs is proposed based on the parametric analysis of varying loading positions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors sincerely acknowledge the support from the Texas Department of Transportation (TxDOT) under Grant No. 0-6905. The support provided by the project supervisory committee is highly appreciated. The authors also appreciate the support from the lab staff and researchers at the University of Houston.
References
AASHTO. 2002. AASHTO standard specifications for highway bridges. 17th ed. Washington, DC: AASHTO.
AASHTO. 2014. AASHTO LRFD bridge design specifications. 7th ed. Washington, DC: AASHTO.
ABAQUS. 2010. ABAQUS theory manual. Providence, RI: ABAQUS.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete and commentary. ACI 318M-14. Farmington Hills, MI: ACI.
Ambare, S., and R. J. Peterman. 2006. Evaluation of the inverted tee shallow bridge system for use in Kansas. Rep. No. K-TRAN: KSU-00-1. Manhattan, KS: Kansas Dept. of Transportation, Kansas State Univ.
Belarbi, A., and T. T. C. Hsu. 1994. “Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete.” ACI Struct. J. 91 (4): 465–474.
Coletti, D., B. Chavel, and W. J. Gatti. 2011. “Challenges of skew in bridges with steel girders.” Transp. Res. Rec. 2251 (1): 47–56. https://doi.org/10.3141/2251-05.
Furlong, R. W., P. M. Ferguson, and J. S. Ma. 1971. Shear and anchorage study of reinforcement in inverted T-beam bent cap girders. Project No. 3-5-68-113. Austin, TX: Center for Highway Research, Univ. of Texas at Austin.
Galal, K., and M. Sekar. 2008. “Rehabilitation of RC inverted-T girders using anchored CFRP sheets.” Composites, Part B 39 (4): 604–617. https://doi.org/10.1016/j.compositesb.2007.09.001.
Hsu, T. T. C., and Y. L. Mo. 2010. Unified theory of concrete structures. London: Wiley.
Kwon, M., P. B. Shing, C. Mallare, and J. Restrepo. 2011. “Seismic resistance of RC bent caps in elevated mass transit structures.” Earthquake Spectra 27 (1): 67–88. https://doi.org/10.1193/1.3533471.
Larson, N., E. F. Gomez, D. Garber, O. Bayrak, and W. Ghannoum. 2013. Strength and serviceability design of reinforced concrete inverted-T beams. Rep. No. FHWA/TX-13/0-6416-1. Austin, TX: Texas Dept. of Transportation, Univ. of Texas at Austin.
Menassa, C., M. Mabsout, K. Tarhini, and G. Frederick. 2007. “Influence of skew angle on reinforced concrete slab bridges.” J. Bridge Eng. 12 (2): 205–214. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:2(205).
Mirza, S. A., and R. W. Furlong. 1983a. “Serviceablity behavior and failure mechanisms of concrete inverted T-beam bridge bentcaps.” ACI J. Proc. 80 (4): 294–304.
Mirza, S. A., and R. W. Furlong. 1983b. “Strength criteria for concrete inverted T-girders.” J. Struct. Eng. 109 (8): 1836–1853. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:8(1836).
Mirza, S. A., and R. W. Furlong. 1985. “Design of reinforced and prestressed concrete inverted T-beams for bridge structures.” PCI J. 30 (4): 112–136. https://doi.org/10.15554/pcij.07011985.112.136.
Roy, S. S. 2019. “Structural performance of skew reinforcing in inverted-T bridge caps.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of Houston.
Roy, S. S., J. Sawab, T. Zhou, Y. L. Mo, and T. T. C. Hsu. 2018. “Performance of skew reinforcing in inverted-T bridge caps.” J. Transp. Res. Rec. 2672 (41): 65–74. https://doi.org/10.1177/0361198118756892.
Snyder, R., J. V. Werff, Z. Thiemann, S. Sritharan, and J. Holombo. 2011. Seismic performance of an I-girder to inverted-T bent cap connection. Ames, IA: Iowa State Univ.
TxDOT (Texas Department of Transportation). 2015. LRFD bridge design manual. Austin, TX: TxDOT.
Zhu, R. R. H., H. Dhonde, and T. T. C. Hsu. 2003. Crack control for ledges in inverted “T” bent caps, TxDOT. Rep. No. 0-1854-5. Houston, TX: Dept. of Civil and Environmental Engineering, Univ. of Houston.
Zhu, R. R. H., and T. T. C. Hsu. 2003. Crack width prediction for exterior portion of inverted T bent caps. ACI Special Publication 225, 179–196. Farmington Hills, MI: ACI.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 22, 2020
Accepted: Jun 9, 2020
Published online: Aug 28, 2020
Published in print: Nov 1, 2020
Discussion open until: Jan 28, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.