Performance of Concrete-Filled Steel Tube Bridge Columns Subjected to Vehicle Collision
Publication: Journal of Bridge Engineering
Volume 24, Issue 8
Abstract
Collision of vehicles into RC bridge columns can result in significant damage to individual bridge components, leading to partial or full collapse of the entire bridge. Among various alternatives to RC columns, concrete-filled steel tubes (CFSTs) have received growing attention because of their rapid construction, reduced labor requirement, and reasonable material cost. Despite the promise of this alternative, however, there is a gap in the existing literature concerning the measures that can be used for the analysis and design of this important category of bridge columns subjected to impact loads. To address this gap, a detailed investigation is conducted in the current study, using a set of impact simulations. For this purpose, representative finite-element (FE) models are developed and validated with the experimental test results. To make a direct comparison possible, the numerical simulations include both CFST and RC columns under a range of vehicle impact scenarios. The structural performance is evaluated using a comprehensive set of measures, including peak dynamic force (PDF) and equivalent static force (ESF). On establishing the necessary metrics, the current study provides a systematic effort to examine the contribution of the main analysis and design parameters to the impact response of the columns under consideration. Based on the simulation results, the sufficiency of the current specifications is evaluated, and a generalized equation is proposed to predict the ESF for CFST columns.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 2017. AASHTO LRFD bridge design specifications. 8th ed. Washington, DC: AASHTO.
Aghdamy, S., D. P. Thambiratnam, M. Dhanasekar, and S. Saiedi. 2015. “Computer analysis of impact behavior of concrete filled steel tube columns.” Adv. Eng. Software 89 (Nov): 52–63. https://doi.org/10.1016/j.advengsoft.2015.06.015.
Agrawal, A. K., G. Y. Liu, and S. Alampalli. 2013. “Effects of truck impacts on bridge piers.” Adv. Mater. Res. 639–640: 13–25. https://doi.org/10.4028/www.scientific.net/AMR.639-640.13.
AuYeung, S., and A. Alipour. 2016. “Evaluation of AASHTO suggested design values for reinforced concrete bridge piers under vehicle collisions.” Transp. Res. Rec. 2592 (1): 1–8. https://doi.org/10.3141/2592-01.
Bambach, M. R., H. Jama, X. L. Zhao, and R. H. Grzebieta. 2008. “Hollow and concrete filled steel hollow sections under transverse impact loads.” Eng. Struct. 30 (10): 2859–2870. https://doi.org/10.1016/j.engstruct.2008.04.003.
Bischoff, P. H., and S. H. Perry. 1991. “Compressive behaviour of concrete at high strain rates.” Mater. Struct. 24 (6): 425–450. https://doi.org/10.1007/BF02472016.
Buth, C. E., W. F. Williams, M. S. Brackin, D. Lord, S. R. Geedipally, and A. Y. Abu-Odeh. 2010. Analysis of large truck collisions with bridge piers: Phase 1, report of guidelines for designing bridge piers and abutments for vehicle collisions. FHWA-10/9-4973-1. San Antonio: Texas Transportation Institute.
Chopra, A. K. 2017. Dynamics of structures: Theory and applications to earthquake engineering. Hoboken, NJ: Pearson.
Cook, W. 2014. “Bridge failure rates, consequences, and predictive trends.” Ph.D. thesis, Utah State Univ.
Cowper, G. R., and P. S. Symonds. 1957. Strain-hardening and strain-rate effects in the impact loading of cantilever beams. Tech. Rep. 28. Providence, RI: Brown Univ., Division of Applied Mathematics.
Deng, Y., C. Tuan, and Y. Xiao. 2012. “Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading.” J. Struct. Eng. 138 (3): 449–456. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000464.
El-Tawil, S. 2004. Vehicle collision with bridge piers. Final report to the Florida DOT for Project BC-355-6. Tallahassee, FL: Florida DOT.
El-Tawil, S., E. Severino, and P. Fonseca. 2005. “Vehicle collision with bridge piers.” J. Bridge Eng. 10 (3): 345–353. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(345).
fib (Fédération Internationale due béton). 1988. Concrete structures under impact and impulsive loading. CEB Bulletin No. 187. Lausanne, Switzerland: fib.
Fujikura, S., M. Bruneau, and D. Lopez-Garcia. 2008. “Experimental investigation of multihazard resistant bridge piers having concrete-filled steel tube under blast loading.” J. Bridge Eng. 13 (6): 586–594. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:6(586).
Fujimoto, T., A. Mukai, I. Nishiyama, and K. Sakino. 2004. “Behavior of eccentrically loaded concrete-filled steel tubular columns.” J. Struct. Eng. 130 (2): 203–212. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(203).
Gomez, N. L., and A. Alipour. 2014. “Study of circular reinforced concrete bridge piers subjected to vehicular collisions.” In Structures Congress 2014, edited by G. R. Bell and M. A. Card, 577–587. Reston, VA: ASCE.
Han, L.-H., C.-C. Hou, X.-L. Zhao, and K. J. R. Rasmussen. 2014. “Behaviour of high-strength concrete filled steel tubes under transverse impact loading.” J. Constr. Steel Res. 92 (Jan): 25–39. https://doi.org/10.1016/j.jcsr.2013.09.003.
Karco Engineering. 2005a. Crash test report for perimeter barriers and gates tested to SD-STD-02.01. Test Rep. No. TR-P25039-01-NC Revision A. Adelanto, CA: Karco Engineering.
Karco Engineering. 2005b. Crash test report for perimeter barriers and gates tested to SD-STD-02.01. Test Rep. No. TR-P25039-02-NC Revision A. Adelanto, CA: Karco Engineering.
Karco Engineering. 2005c. Crash test report for perimeter barriers and gates tested to SD-STD-02.01. Test Rep. No. TR-P25076-01-NC Revision A. Adelanto, CA: Karco Engineering.
LSTC (Livermore Software Technology Corporation). 2017. LS-DYNA keyword user’s manual, version R10.0. Livermore, CA: LSTC.
Malvar, L. J. 1998. “Review of static and dynamic properties of steel reinforcing bars.” ACI Mater. J. 95 (5): 609–614.
Mohammed, T. A. 2011. “Reinforced concrete structural members under impact loading.” Ph.D. thesis, Univ. of Toledo.
Morino, S. 1998. “Recent developments in hybrid structures in Japan—Research, design and construction.” Eng. Struct. 20 (4–6): 336–346. https://doi.org/10.1016/S0141-0296(97)00022-9.
Murray, Y. 2007. User’s manual for LS-DYNA concrete material model 159. McLean, VA: FHWA.
O’Shea, M., and R. Bridge. 2000. “Design of circular thin-walled concrete filled steel tubes.” J. Struct. Eng. 126 (11): 1295–1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295).
Rado, Z., and R. Tallon. 2005. Crash testing of RSA/KC anti-ram foundation Bollard Pad in accordance with US Dept. of State Diplomatic Security SD-STD-02.01, revision A. Final Rep. University Park, PA: Pennsylvania Transportation Institute.
Rasmussen, K. J. R., and G. Ranzi. 2007. “Strength of concrete-filled stainless steel tubes under impact loading.” In Proc., 19th Australasian Conference on the Mechanics of Structures and Materials, 811–816. Christchurch, New Zealand: ACMSM.
Roeder, C., D. Lehman, and M. Stephens. 2014. “Concrete-filled steel tubes for accelerated bridge construction.” Transp. Res. Rec. 2406 (1): 49–58. https://doi.org/10.3141/2406-06.
Ross, N. E., D. L. Sicking, and R. A. Zimmer. 1993. Recommended procedures for the safety performance evaluation of highway features. NCHRP Rep. 350. Washington, DC: Transportation Research Board, National Research Council.
Saini, D. S., and B. Shafei. 2017a. “Performance evaluation of concrete filled steel tube bridge piers under vehicle impact.” In Proc., Transportation Research Board 96th Annual Meeting, Washington, DC: Transportation Research Board.
Saini, D. S., and B. Shafei. 2017b. “Calibration of barge models for the reliable prediction of impact force on bridge piers.” In Structures Congress 2017: Blast, impact loading, and response of structures, edited by J. G. Soules, 27–36. Reston, VA: ASCE.
Saini, D. S., and B. Shafei. 2018a. “Numerical investigation of CFRP-composite-strengthened RC bridge piers against vehicle collision.” In Proc., Transportation Research Board 97th Annual Meeting, Washington, DC: Transportation Research Board.
Saini, D. S., and B. Shafei. 2018b. “Vulnerability assessment of concrete filled steel tube columns under multiple extreme events: Corrosion and vehicular impact.” In Structures Congress 2018: Blast impact loading, and response, and research education, edited by J. G. Soules, 224–235. Reston, VA: ASCE.
Saini, D., and B. Shafei. 2019. “Investigation of concrete-filled steel tube beams strengthened with CFRP against impact loads.” Compos. Struct. 208 (Jan): 744–757. https://doi.org/10.1016/j.compstruct.2018.09.057.
Schneider, S. 1998. “Axially loaded concrete-filled steel tubes.” J. Struct. Eng. 124 (10): 1125–1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125).
Shan, J. H., R. Chen, W. X. Zhang, Y. Xiao, W. J. Yi, and F. Y. Lu. 2007. “Behavior of concrete filled tubes and confined concrete filled tubes under high speed impact.” Adv. Struct. Eng. 10 (2): 209–218. https://doi.org/10.1260/136943307780429725.
Taricska, M. 2014. “An analysis of recent bridge failures (2000–2012).” M.Sc. thesis, Ohio State Univ.
Uy, B. 1998. “Concrete-filled fabricated steel box columns for multistorey buildings: Behaviour and design.” Progr. Struct. Eng. Mater. 1 (2): 150–158. https://doi.org/10.1002/pse.2260010207.
Varma, A. H., J. M. Ricles, R. Sause, and L.-W. Lu. 2002. “Seismic behavior and modeling of high-strength composite concrete-filled steel tube (CFT) beam–columns.” J. Constr. Steel Res. 58 (5–8): 725–758. https://doi.org/10.1016/S0143-974X(01)00099-2.
Wang, R., L.-H. Han, and C.-C. Hou. 2013. “Behavior of concrete filled steel tubular (CFST) members under lateral impact: Experiment and FEA model.” J. Constr. Steel Res. 80 (Jan): 188–201. https://doi.org/10.1016/j.jcsr.2012.09.003.
Wang, R., L. Zhu, R. Gouping, and Z. Shanyuan. 2007. “Experimental study and numerical simulation of the dynamic response of concrete filled steel tubes under lateral impact load.” China Civ. Eng. J. 40 (10): 34–40.
Wardhana, K., and F. Hadipriono. 2003. “Analysis of recent bridge failures in the United States.” J. Perform. Constr. Facil. 17 (3): 144–150. https://doi.org/10.1061/(ASCE)0887-3828(2003)17:3(144).
Xiao, Y., J. Shan, Q. Zheng, B. Chen, and Y. Shen. 2009. “Experimental studies on concrete filled steel tubes under high strain rate loading.” J. Mater. Civ. Eng. 21 (10): 569–577. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:10(569).
Xiao, Y., and Y. Shen. 2012. “Impact behaviors of CFT and CFRP confined CFT stub columns.” J. Compos. Constr. 16 (6): 662–670. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000294.
Yousuf, M., B. Uy, Z. Tao, A. Remennikov, and J. Y. R. Liew. 2013. “Transverse impact resistance of hollow and concrete filled stainless steel columns.” J. Constr. Steel Res. 82 (Mar): 177–189. https://doi.org/10.1016/j.jcsr.2013.01.005.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Feb 27, 2018
Accepted: Feb 8, 2019
Published online: May 17, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.