Pile Response under Axial Tension Forces in Sandy Soils
Publication: Journal of Bridge Engineering
Volume 22, Issue 11
Abstract
This paper presents a methodology to predict the pile-head load versus displacement curve, and the associated mobilized stiffness of a pile embedded into sandy soils, on the basis of the soil-pile interaction. The mobilized tensile resistance and displacement of the pile shaft are determined up to failure on the basis of the soil and pile properties, including the soil stress-strain curve. The proposed technique also provides the t-z curves for piles in sandy soils that can be separately used in a combined model for a complete superstructure-substructure solution. A detailed flowchart is presented to describe the proposed methodology that has been compiled through a computer program. A number of comparisons with full-scale load tests at different sites were employed to validate the suggested technique. In addition, a finite-element model has also been developed to compare the results of the presented method with those determined from the finite-element analysis and full-scale load tests results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alawneh, A. S., Nusier, O. K., and Sharo’, A. A. (2007). “Poisson’s ratio effect on compressive and tensile shaft capacity of driven piles in sand: Theoretical formulation.” Comput. Geotech., 34(3), 151–163.
API (American Petroleum Institute). (1969). “Recommended practice for planning, designing and constructing fixed offshore platforms.” API RP2A, 1st Ed., Washington, DC.
API (American Petroleum Institute). (1984). “Recommended practice for planning, designing and constructing fixed offshore platforms.” API RP2A, 15th Ed., Washington, DC.
API (American Petroleum Institute). (2014). Geotechnical and foundation design considerations, 22nd Ed.,Washington, DC.
Ashour, M., and Helal, A. (2017). “Pre- and post-liquefaction response of axially loaded piles in sands.” Int. J. Geomech., 04017073.
Ashour, M., Norris, G., and Pilling, P. (1998). “Lateral loading of a pile in layered soil using the strain wedge model.” J. Geotech. Geoenviron. Eng., 303–315.
Bowles, J. E. (1996). Foundation analysis and design, 5th Ed.,McGraw-Hill, New York.
Brown, D. A., Turner, J. P., and Castelli, R. J. (2010). “Drilled shafts: Construction procedures and LRFD design methods.” FHWA-NHI-10-016, Federal Highway Administration, Washington, DC.
Carvalho D. D., and Albuquerque, R. D. (2013). “Uplift behavior of bored piles in tropical unsaturated sandy soil.” Proc., 18th Int. Conf., Soil Mechanics and Geotechnical Engineering, Vol. 4, Presses des Ponts, Paris, 2707–2710.
Coyle, H. M., and Reese, L. C. (1966). “Load transfer for axially loaded piles in clay.” J. Soil Mech. Found. Div., 92(2), 1–26.
De Nicola, A. (1996). “The performance of pipe piles in sand.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Western Australia, Nedlands, Australia.
De Nicola, A., and Randolph, M. F. (1993). “Tensile and compressive shaft capacity of piles in sand.” J. Geotech. Eng., 1952–1973.
Hannigan, P. J., Rausche, F., Likins, G. E., Robinson, B. R., and Becker, M. L. (2016). “Design and construction of driven pile foundations.” FHWA-NHI-16-009, Federal Highway Administration, Washington, DC.
Jardine, R. J., and Standing, J. R. (2000). “Pile load testing preformed for HSE cyclic loading study.” OTO 2000 008, Dept. of Civil & Environmental Engineering, Imperial College of Science & Technology, Dunkirk, France.
Kulhawy, F. (2004). “On the axial behavior of drilled foundations.” GeoSupport 2004: Drilled shafts, micropiling, deep mixing, remedial methods, and specialty foundation systems, Geotechnical special publication 124, J. P. Turner and P. W. Mayne, eds., ASCE, Reston, VA, 34–51.
Lehane, B. M., Jardine, R. J., Bond, A. J., and Frank, R. (1993). “Mechanisms of shaft friction in sand from instrumented pile tests.” J. Geotech. Engrg., 19–35.
McManus, K. J. (1997). “Axial behavior of bored pile foundation.” Report 97-2, Dept. of Civil Engineering, Univ. of Canterbury, Christchurch, New Zealand,
NAVFAC (Naval Facilities Engineering Command). (1986). Foundations and earth structures: Design manual 7.02, Naval Facilities Engineering Command, Alexandria, VA.
Norris, G. M. (1986). “Theoretically based BEF laterally loaded pile analysis.” 3rd Int. Conf. Numerical Methods in Offshore Piling, Editions Technip, Paris, 361–386.
O’Neil, M. (2001). “Side resistance in piles and drilled shafts.” J. Geotech. Geoenviron. Eng., 3–16.
O’Neil, M. W., and Hassan, K. H. (1994). “Drilled shafts: Effects of construction on performance and design criteria.” Proc., Int. Conf., Deep Foundations, Vol. 1, Federal Highway Administration, Washington, DC., 137–187.
O’Neil, M., and Raines, R. (1991). “Load transfer for pipe piles in highly pressured dense sand.” J. Geotech. Engrg., 1208–1226.
O’Neil, M. W., and Reese, L. C. (1999). “Drilled shafts: Construction procedures and design methods.” FHWA-IF-99-025, Federal Highway Administration, Washington, DC.
Park, R., and Paulay, T. (1974). Reinforced concrete structures, Wiley-Interscience, Hoboken, NJ, 16–17.
Plaxis 2D [Computer software]. Plaxis bv, Delft, Netherlands.
Randolph, M. F., and Wroth, C. P. (1978). “Analysis of deformation of vertically loaded piles.” J. Geotech. Eng., 104(12), 1465–1488.
Reddy, E. S. B., O'Reilly, M., and Chapman, D. (1997). “A software to predict the behaviour of tension piles.” Comput. Struct., 62(4), 653–658.
Reddy, E. S. B., O'Reilly, M., and Chapman, D. N. (1998). “Modified T-Z model—A software for tension piles.” Comput. Struct., 68, 613–625.
Seed, H. B., Wong, R. T., Idriss, I. M., and Tokimatsu, K. (1986). “Moduli and damping factors for dynamic analyses of cohesionless soils.” J. Geotech. Engrg., 1016–1032.
Sulaiman, I. H., and Coyle, H. M. (1976). “Uplift resistance of piles in sand.” J. Geotech. Eng. Div., 102(5), 559–562.
Tucker, L. M., and Briaud, J. (1988). “Analysis of the pile load test program at the Lock and Dam 26 replacement project.” Paper GL-88-11, Civil Engineering, Texas A&M Univ., College Station, TX.
USACE (U.S. Army Corps of Engineers). (1991). “Engineering and design: Design of pile foundations.” Engineer Manual 1110-2-2906, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Dec 8, 2016
Accepted: May 31, 2017
Published online: Sep 8, 2017
Published in print: Nov 1, 2017
Discussion open until: Feb 8, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.