Considerations and Issues in the Utilization of Infrared Thermography for Concrete Bridge Inspection at Normal Driving Speeds
Publication: Journal of Bridge Engineering
Volume 22, Issue 11
Abstract
The main objective of this study is to comprehensively evaluate the utilization of infrared thermography (IRT) considering different technologies, critical environmental parameters, and uncertainties for bridge deck evaluation. For this purpose, a real bridge was scanned and the results were compared with other nondestructive evaluation (NDE) technologies that were implemented on the same bridge. There are a number of considerations and factors that affect the utilization of IRT, such as thermal contrasts, camera specifications, distance, and utilization speed, and these are evaluated by using three different infrared (IR) cameras with different specifications. These considerations are discussed and results are presented. When compared at fully documented locations with eight concrete cores, a high-end IR camera with cooled detector distinguished sound and delaminated areas accurately. Furthermore, indicated location and shape of delaminations by three IR cameras were compared with other NDE methods from past research, and the results revealed that the cooled camera showed shapes almost identical to other NDE methods including chain drag. It should be noted that these data were collected at a normal driving speed without any lane closures, making it a more practical and faster method than other NDE technologies. It is also presented that the factor most likely to affect high-speed application is integration time of the IR camera.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported mainly by West Nippon Expressway Company Limited (NEXCO-West). The authors would like to express sincere gratitude to Mr. Shinji Nagayasu and Mr. Kyle Ruske of NEXCO-West USA for their contribution and support throughout the studies presented in this manuscript. Without their contributions, this project would have not been realized.
References
Abdel-qader, I., Yohali, S., Abudayyeh, O., and Yehia, S. (2008). “Segmentation of thermal images for non-destructive evaluation of bridge decks.” NDT and E Int., 41(5), 395–405.
ASTM. (2014). “Standard test method for detecting delaminations in bridge decks using infrared thermography.” D4788, West Conshohocken, PA.
Catbas, F. N., Hiasa, S., Khuc, T., Matsumoto, M., and Mitani, K. (2015). “Development, implementation and evaluation of image-based technologies for civil infrastructure systems.” Rep. submitted, West Nippon Expressway Company limited (NEXCO-West), Osaka, Japan.
FHWA (Federal Highway Administration). (2014). “2013 status of the nation’s highways. Bridges, and transit: Conditions & performance.” Washington, DC.
FHWA (Federal Highway Administration). (2015a). “Deficient bridges by state and highway system 2015.” ⟨http://www.fhwa.dot.gov/bridge/nbi/no10/defbr15.cfm⟩ (Apr. 27, 2016).
FHWA (Federal Highway Administration). (2015b). “Deficient bridges by year built 2015.” ⟨http://www.fhwa.dot.gov/bridge/nbi/no10/yrblt15.cfm⟩ (Sep. 1, 2017).
FLIR. (2013). The ultimate infrared handbook for R&D professionals, FLIR AB, Wilsonville, OR.
FLIR. (2015). “Cooled or uncooled?” ⟨http://www.flir.com/science/display/?id=65982⟩ (Sep. 1, 2017).
Gucunski, N., et al. (2013). Nondestructive testing to identify concrete bridge deck deterioration, Transportation Research Board, Washington, DC.
Gucunski, N., Kee, S., La, H., Basily, B., and Maher, A. (2015). “Delamination and concrete quality assessment of concrete bridge decks using a fully autonomous RABIT platform.” Struct. Monit. Maint., 2(1), 19–34.
Hashimoto, K., and Akashi, Y. (2010). “Points to consider for photography by infrared cameras with different wavelength detection region.” 65th JSCE Annual Meeting, Japan Society of Civil Engineers, Sapporo, Japan, VI-160.
Hiasa, S. (2016). “Investigation of infrared thermography for subsurface damage detection of concrete structures.” Ph.D. dissertation, Univ. of Central Florida, Orlando, FL.
Hiasa, S., Birgul, R., and Catbas, F. N. (2016a). “Infrared thermography for civil structural assessment: demonstrations with laboratory and field studies.” J. Civ. Struct. Health Monit., 6(3), 619–636.
Hiasa, S., Birgul, R., and Catbas, F. N. (2017a). “Effect of defect size on subsurface defect detectability and defect depth estimation for concrete structures by infrared thermography.” J. Nondestr. Eval., 36(3), 57.
Hiasa, S., Birgul, R., and Catbas, F. N. (2017b). “Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modeling.” Constr. Build. Mater., 150, 295–309.
Hiasa, S., Birgul, R., and Necati Catbas, F. (2017c). “A data processing methodology for infrared thermography images of concrete bridges.” Comput. Struct., 190, 205–218.
Hiasa, S., Catbas, F. N., Matsumoto, M., and Mitani, K. (2016b). “Monitoring concrete bridge decks using infrared thermography with high speed vehicles.” Struct. Monit. Maint., 3(3), 277–296.
Holst, G. C. (2000). Common sense approach to thermal imaging, JCD Publishing, Winter Park, FL.
Kashif Ur Rehman, S., Ibrahim, Z., Memon, S. A., and Jameel, M. (2016). “Nondestructive test methods for concrete bridges: A review.” Constr. Build. Mater., 107(Mar), 58–86.
Kee, S., Oh, T., Popovics, J., Arndt, R., and Zhu, J. (2012). “Nondestructive bridge deck testing with air-coupled impact-echo and infrared thermography.” J. Bridge Eng., 928–939.
Khan, F., Bolhassani, M., Kontsos, A., Hamid, A., and Bartoli, I. (2015). “Modeling and experimental implementation of infrared thermography on concrete masonry structures.” Infrared Phys. Technol., 69(Mar), 228–237.
Koch, C., Georgieva, K., Kasireddy, V., Akinci, B., and Fieguth, P. (2015). “A review on computer vision based defect detection and condition assessment of concrete and asphalt civil infrastructure.” Adv. Eng. Inf., 29(2), 196–210.
Maldague, X. P. V. (2002). “Introduction to NDT by active infrared thermography.” Mater. Eval., 60(9), 1060–1073.
Matsumoto, M., Mitani, K., and Catbas, F. N. (2012). “Bridge assessment methods using image processing and infrared thermography.” 28th U.S.-Japan Bridge Engineering Workshop, Public Works Research Institute, Sapporo, Japan.
Matsumoto, M., Mitani, K., and Catbas, F. N. (2015). “NDE for bridge assessment using image processing and infrared thermography: The pilot project.” Transportation Research Board 94th Annual Meeting, Transportation Research Board, Washington, DC.
McCann, D. M. and Forde, M. C. (2001). “Review of NDT methods in the assessment of concrete and masonry structures.” NDT and E International, 34(2), 71–84.
Nakamura, S., Takaya, S., Maeda, Y., Yamamoto, T., and Miyagawa, T. (2013). “Spalling time prediction by using infrared thermography.” J. Jpn. Soc. Civ. Eng., 69(4), 450–461.
Nishikawa, T., Hirano, A., and Kamada, E. (2000). “Experimental study on thermography method for external wall removement finished with ceramic tile.” J. Struct. Constr. Eng., 65(529), 29–35.
Oh, T., Kee, S., Arndt, R., Popovics, J., and Zhu, J. (2013). “Comparison of NDT methods for assessment of a concrete bridge deck.” J. Eng. Mech., 305–314.
Tashan, J., Al-mahaidi, R., and Mamkak, A. (2015). “Defect size measurement and far distance infrared detection in CFRP-concrete and CFRP-steel systems.” Aust. J. Struct. Eng., 17(1), 2–13.
Washer, G., Fenwick, R., Nelson, S., and Rumbayan, R. (2013). “Guidelines for the thermographic inspection of concrete bridge components in shaded conditions.” Transportation Research Record 2360, 13–20.
Waugh, R. C. (2016). “Development of infrared techniques for practical defect identification in bonded joints.” Development of infrared techniques for practical defect identification in bonded joints, Springer International Publishing, Cham, Switzerland, 21–37.
WeatherUnderground. (2014). “Hourly weather history & observations.” ⟨https://www.wunderground.com/history/airport/KHEF/2014/10/2/DailyHistory.html?req_city=Haymarket&req_state=VA&req_statename=&reqdb.zip=20168&reqdb.magic=1&reqdb.wmo=99999&MR=1⟩ (Sep. 1, 2017).
Wu, L., Mokhtari, S., Nazef, A., Nam, B., and Yun, H. (2016). “Improvement of crack-detection accuracy using a novel crack defragmentation technique in image-based road assessment.” J. Comput. Civ. Eng., 04014118.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Feb 22, 2016
Accepted: May 12, 2017
Published online: Sep 13, 2017
Published in print: Nov 1, 2017
Discussion open until: Feb 13, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.