Experimental Study on Shear Behavior in Negative Moment Regions of Segmental Externally Prestressed Concrete Continuous Beams
Publication: Journal of Bridge Engineering
Volume 18, Issue 4
Abstract
External prestressing technology has achieved wide application in bridges. Although previous tests have made great progress in shear behavior of externally prestressed concrete beams, the research mainly focused on simply supported beams. To study the effects of joints and large negative moments on the shear behavior of segmental externally prestressed concrete continuous beams, a series of cantilever beam specimens were designed to simulate the negative moment regions in continuous beams. Then, the crack developing behavior, failure mode behavior, and mechanical behavior of specimens with different shear span to effective depth ratios, joint types, joint locations, and ratios of internal to external tendons were investigated in this experimental study. The test results show that failure cracks of segmental specimens are web shear cracks, whose locations and inclination angles are independent of joints. Eventually, both sides of the specimens move relatively along failure cracks and the specimens fail suddenly. The results also reveal that the deflections of segmental specimens after cracking develop very quickly, and the stress increments of prestressing tendons reach 20–24% of the tensile strength, which are larger than those of monolithic specimens. In addition, the shear strength provided by the concrete effects in regions near the interior supports of continuous beams is lower than that in regions near the supports of simply supported beams, and the contributions of the stirrup and prestressing tendon to the shear strength are 14–21 and 8–18%, respectively, in which the contribution of stirrup is greater than that of simply supported beams.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This experimental work was performed in the State Key Laboratory for Disaster Reduction in Civil Engineering of Tongji University. The authors would like to express their sincere appreciation to the reviewers of this paper for their constructive comments and suggestions.
References
AASHTO. (1999). Guide specifications for the design and construction of segmental concrete bridges, Washington, DC.
AASHTO. (2002). Standard specifications for highway bridges, Washington, DC.
Aparicio, A. C., Ramos, G., and Casas, J. R. (2002). “Testing of externally prestressed concrete beams.” Eng. Struct., 24(1), 73–84.
Buyukozturk, O., Bakhoum, M. M., and Beattie, S. M. (1990). “Shear behavior of joints in precast concrete segmental bridges.” J. Struct. Eng., 116(12), 3380–3401.
Corven, J. A. (1993). “Overview on external prestressing in the world application in North America.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 43–52.
Dronnadulla, V. R., Madasamy, A., Vikas, S., Ganapathy, M., and Shahawy, M. A. (1993). “Ultimate load behaviour of precast single-cell segmental box girders with external post-tensioning.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 265–274.
Eibl, J. (1993). “An overview on external prestressing in Germany.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 53–70.
Foure, B., Hoang, L. H., Bouafia, Y., Soubret, R., and Belaloui, F. (1993a). “Shear strength of externally prestressed beams.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 309–319.
Foure, B., Rezende-Martins, P., Hoang, L. H., and Menezes, N. C. (1993b). “Flexural behaviour of externally prestressed concrete beams, monolithic or made of precast segments.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 163–174.
Harajli, M. H. (1993). “Strengthening of concrete beams by external prestressing.” PCI J., 38(6), 76–88.
Li, G. P. (2007). “Experimental study on the shear behavior of simply-supported externally prestressed concrete beams.” China Civ. Eng. J., 40(2), 58–63 (in Chinese).
Li, G. P., and Zhang, G. Q. (2007). “Experimental study on the flexural behavior of externally prestressed concrete continuous beams.” China Civ. Eng. J., 40(2), 53–57 (in Chinese).
Ministry of Transport of the People’s Republic of China. (2004). “Code for design of highway reinforced concrete and prestressed concrete bridges and culverts.” JTG D62-2004, China Communications Press, Beijing (in Chinese).
Muller, J. (1993). “Some recent international projects with external prestressing.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 71–83.
Naaman, A. E., and Jeong, S. M. (1993). “Considerations of structural ductility with external tendons.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 239–250.
Ng, C. K. (2003). “Tendon stress and flexural strength of externally prestressed beams.” ACI Struct. J., 100(5), 644–653.
Ramirez, G., Macgregor, R., Kreger, M. E., Roberts-Wollmann, C., and Breen, J. E. (1993). “Shear strength of segmental structures.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 287–296.
Rezende-Martins, P. C., Regis, P. A., and Desir, J. M. (1993). “A study on the behaviour of hyperstatic concrete beams with mixed prestressing.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 217–226.
Saibabu, S., Lakshmanan, N., Murthy, A. R. C., Ganapathi, S. C., Jayaraman, R., and Senthil, R. (2009). “External prestressing technique for strengthening of prestressed concrete structural components.” Pract. Period. Struct. Des. Constr., 14(2), 90–98.
Tan, K. H., and Tjandra, R. A. (2003). “Shear deficiency in reinforced concrete continuous beams strengthened with external tendons.” ACI Struct. J., 100(5), 565–572.
Tan, K. H., and Tjandra, R. A. (2007). “Strengthening of RC continuous beams by external prestressing.” J. Struct. Eng., 133(2), 195–204.
Turmo, J., Ramos, G., and Aparicio, A. C. (2006). “Shear strength of dry joints of concrete panels with and without steel fibers: Application to precast segmental bridges.” Eng. Struct., 28(1), 23–33.
Virlogeux, M. (1993). “External prestressing historical and modern applications.” External prestressing in structures, Association Francaise Pour la Construction, Paris, 13–35.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Sep 5, 2011
Accepted: Nov 30, 2011
Published online: Dec 2, 2011
Published in print: Apr 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.