Dynamic Response of FG-CNT Composite Plate Resting on an Elastic Foundation Based on Higher-Order Shear Deformation Theory
Publication: Journal of Aerospace Engineering
Volume 32, Issue 5
Abstract
In this paper, the dynamic response of a functionally graded carbon nanotube–reinforced (FG-CNTRC) composite plate is obtained based on higher-order quasi-three-dimensional (3D) shear deformation theory (i.e., assuming a linear variation of transverse displacement through the thickness). The governing equations of motion are developed using the energy principle and solved using finite-element methods. Newmark’s time integration techniques are employed to obtain the forced response of FG-CNTRC plates. The accuracy of the present formulation is validated by tackling a few numerical cases and comparing finite-element solutions with accessible outcomes. Also, several new results are obtained for covering various features like thickness ratio, aspect ratio, and fiber volume fraction, among others, which can be considered as the benchmark study for future researchers. The outcomes demonstrate that the impact of Winkler foundation stiffness is not as great as the shear foundation stiffness on the natural frequency of the FG-CNTRC plates. The results also show that the free-vibration regime of the plate is highly influenced by duration of dynamic load on the plate. The present formulation gives excellent concurrence with the accessible literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adhikari, B., and B. N. Singh. 2018. “An efficient higher order non-polynomial quasi 3-D theory for dynamic responses of laminated composite plates.” Compos. Struct. 189: 386–397. https://doi.org/10.1016/j.compstruct.2017.10.044.
Alibeigloo, A. 2014. “Free vibration analysis of functionally graded carbon nanotube-reinforced composite cylindrical panel embedded in piezoelectric layers by using theory of elasticity.” Eur. J. Mech. A. Solids 44: 104–115. https://doi.org/10.1016/j.euromechsol.2013.10.002.
Ansari, R., E. Hasrati, M. F. Shojaei, R. Gholami, and A. Shahabodini. 2015. “Forced vibration analysis of functionally graded carbon nanotube-re-inforced composite plates using a numerical strategy.” Physica E 69: 294–305. https://doi.org/10.1016/j.physe.2015.01.011.
Arani, A. G., S. Maghamikia, M. Mohammadimehr, and A. Arefmanesh. 2011. “Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods.” J. Mech. Sci. Technol. 25 (3): 809–820. https://doi.org/10.1007/s12206-011-0127-3.
Carrera, E., S. Brischetto, M. Cinefra, and M. Soave. 2011. “Effects of thickness stretching in functionally graded plates and shells.” Composites Part B 42 (2): 123–133. https://doi.org/10.1016/j.compositesb.2010.10.005.
Duc, N. D., J. Lee, T. Nguyen-Thoi, and P. T. Thang. 2017. “Static response and free vibration of functionally graded carbon nanotube-reinforced composite rectangular plates resting on Winkler–Pasternak elastic foundations.” Aerosp. Sci. Technol. 68: 391–402. https://doi.org/10.1016/j.ast.2017.05.032.
Fantuzzi, N., F. Tornabene, M. Bacciocchi, and R. Dimitri. 2017. “Free vibration analysis of arbitrarily shaped functionally graded carbon nanotube-reinforced plates.” Composites Part B 115: 384–408. https://doi.org/10.1016/j.compositesb.2016.09.021.
Gupta, A., M. Talha, and W. Seemann. 2018. “Free vibration and flexural response of functionally graded plates resting on Winkler–Pasternak elastic foundations using nonpolynomial higher-order shear and normal deformation theory.” Mech. Adv. Mater. Struct. 25 (6): 523–538. https://doi.org/10.1080/15376494.2017.1285459.
Han, Y., and J. Elliott. 2007. “Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites.” Comput. Mater. Sci. 39 (2): 315–323. https://doi.org/10.1016/j.commatsci.2006.06.011.
Kazanci, Z. 2011. “Dynamic response of composite sandwich plates subjected to time-dependent pressure pulses.” Int. J. Non Linear Mech. 46 (5): 807–817. https://doi.org/10.1016/j.ijnonlinmec.2011.03.011.
Ke, L. L., J. Yang, and S. Kitipornchai. 2013. “Dynamic stability of functionally graded carbon nanotube-reinforced composite beams.” Mech. Adv. Mater. Struct. 20 (1): 28–37. https://doi.org/10.1080/15376494.2011.581412.
Kelly, B. T. 1981. Physics of graphite. London: Applied Science.
Khdeir, A. A., and J. N. Reddy. 1989. “Exact solutions for the transient response of symmetric cross-ply laminates using a higher-order plate theory.” Compos. Sci. Technol. 34 (3): 205–224. https://doi.org/10.1016/0266-3538(89)90029-8.
Kiani, Y. 2016. “Free vibration of FG-CNT reinforced composite skew plates.” Aerosp. Sci. Technol. 58: 178–188. https://doi.org/10.1016/j.ast.2016.08.018.
Kiani, Y. 2017. “Thermal buckling of temperature-dependent FG-CNT-reinforced composite skew plates.” J. Therm. Stresses 40 (11): 1442–1460. https://doi.org/10.1080/01495739.2017.1336742.
Kirchhoff, G. 1850. “Über das Gleichgewicht und die Bewegung einer elastischen Scheibe.” Journal für die reine und angewandte Mathematik (Crelles J.) 1850 (40): 51–88. https://doi.org/10.1515/crll.1850.40.51.
Lei, Z. X., L. W. Zhang, and K. M. Liew. 2016. “Analysis of laminated CNT reinforced functionally graded plates using the element-free kp-Ritz method.” Composites Part B 84: 211–221. https://doi.org/10.1016/j.compositesb.2015.08.081.
Liew, K. M., Z. X. Lei, and L. W. Zhang. 2015. “Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review.” Compos. Struct. 120: 90–97. https://doi.org/10.1016/j.compstruct.2014.09.041.
Liu, L., and Z. Huang. 2014. “A Note on mori-tanaka’s method.” Acta Mech. Solida Sin. 27 (3): 234–244. https://doi.org/10.1016/S0894-9166(14)60033-1.
Liu, Y. J., and X. L. Chen. 2003. “Evaluations of the effective material properties of carbon nanotube-based composites using a nanoscale representative volume element.” Mech. Mater. 35 (1–2): 69–81. https://doi.org/10.1016/S0167-6636(02)00200-4.
Mehar, K., and S. K. Panda. 2017. “Thermoelastic analysis of FG-CNT reinforced shear deformable composite plate under various loadings.” Int. J. Comput. Methods 14 (2): 1750019. https://doi.org/10.1142/S0219876217500190.
Mehar, K., S. K. Panda, A. Dehengia, and V. R. Kar. 2016. “Vibration analysis of functionally graded carbon nanotube reinforced composite plate in thermal environment.” J. Sandwich Struct. Mater. 18 (2): 151–173. https://doi.org/10.1177/1099636215613324.
Mindlin, R. D. 1951. “Influence of rotary inertia and shear on flexural motions of isotropic elastic plates.” J. Appl. Mech. 18 (1): 31–38.
Pasternak, P. L. 1954. “On a new method of analysis of an elastic foundation by means of two foundation constants.” In Proc., Cosudarstrennoe Izdatelstvo Literaturi po Stroitelstvu i Arkhitekture, Gosudarstvennoe Izdatelstvo Literaturi po Stroitelstvu I Arkhitekture, 1–56. Moscow: USSR.
Phung-Van, P., M. Abdel-Wahab, K. M. M. Liew, S. P. A. P. A. Bordas, and H. Nguyen-Xuan. 2015. “Isogeometric analysis of functionally graded carbon nanotube-reinforced composite plates using higher-order shear deformation theory.” Compos. Struct. 123: 137–149. https://doi.org/10.1016/j.compstruct.2014.12.021.
Qian, D., E. C. Dickey, R. Andrews, and T. Rantell. 2000. “Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites.” Appl. Phys. Lett. 76 (20): 2868–2870. https://doi.org/10.1063/1.126500.
Qiu, Y. P., and G. J. Weng. 1990. “On the application of Mori-Tanaka’s theory involving transversely isotropic spheroidal inclusions.” Int. J. Eng. Sci. 28 (11): 1121–1137. https://doi.org/10.1016/0020-7225(90)90112-V.
Rafiee, M., J. Yang, and S. Kitipornchai. 2013. “Thermal bifurcation buckling of piezoelectric carbon nanotube reinforced composite beams.” Comput. Math. Appl. 66 (7): 1147–1160. https://doi.org/10.1016/j.camwa.2013.04.031.
Reddy, J. N. 2004. Mechanics of laminated composite plates and shells: Theory and analysis. Boca Raton, FL: CRC Press.
Reissner, E. 1945. “The effect of transverse shear deformation on the bending of elastic plates.” J. Appl. Mech. 12: A68–A77.
Shen, H. S. 2009. “Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments.” Compos. Struct. 91 (1): 9–19. https://doi.org/10.1016/j.compstruct.2009.04.026.
Shen, H. S., H. Wang, and D. Q. Yang. 2017. “Vibration of thermally postbuckled sandwich plates with nanotube-reinforced composite face sheets resting on elastic foundations.” Int. J. Mech. Sci. 124–125: 253–262. https://doi.org/10.1016/j.ijmecsci.2017.03.015.
Shen, H. S., and C. L. Zhang. 2010. “Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates.” Mater. Des. 31 (7): 3403–3411. https://doi.org/10.1016/j.matdes.2010.01.048.
Shen, H. S., and Z. H. Zhu. 2012. “Postbuckling of sandwich plates with nanotube-reinforced composite face sheets resting on elastic foundations.” Eur. J. Mech. A. Solids 35: 10–21. https://doi.org/10.1016/j.euromechsol.2012.01.005.
Shi, D.-L., X.-Q. Feng, Y. Y. Huang, K.-C. Hwang, and H. Gao. 2004. “The Effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites.” J. Eng. Mater. Technol. 126 (3): 250. https://doi.org/10.1115/1.1751182.
Swain, P. R., B. Adhikari, and P. Dash. 2017. “A higher-order polynomial shear deformation theory for geometrically nonlinear free vibration response of laminated composite plate.” Mech. Adv. Mater. Struct. 26 (2): 1–10. https://doi.org/10.1080/15376494.2017.1365981.
Thang, P. T., T.-T. Nguyen, and J. Lee. 2017. “A new approach for nonlinear buckling analysis of imperfect functionally graded carbon nanotube-reinforced composite plates.” Composites Part B 127: 166–174. https://doi.org/10.1016/j.compositesb.2016.12.002.
Tornabene, F., N. Fantuzzi, and M. Bacciocchi. 2017. “Linear static response of nanocomposite plates and shells reinforced by agglomerated carbon nanotubes.” Composites Part B 115: 449–476. https://doi.org/10.1016/j.compositesb.2016.07.011.
Tornabene, F., N. Fantuzzi, M. Bacciocchi, and E. Viola. 2016. “Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells.” Composites Part B 89: 187–218. https://doi.org/10.1016/j.compositesb.2015.11.016.
Wang, J., and R. Pyrz. 2004. “Prediction of the overall moduli of layered silicate-reinforced nanocomposites-part I: Basic theory and formulas.” Compos. Sci. Technol. 64 (7–8): 925–934. https://doi.org/10.1016/S0266-3538(03)00024-1.
Wang, M., Z. Li, and P. Qiao. 2016. “Semi-analytical solutions to buckling and free vibration analysis of carbon nanotube-reinforced composite thin plates.” Compos. Struct. 144: 33–43. https://doi.org/10.1016/j.compstruct.2016.02.025.
Wang, M., Z.-M. Li, and P. Qiao. 2018. “Vibration analysis of sandwich plates with carbon nanotube-reinforced composite face-sheets.” Compos. Struct. 200: 799–809. https://doi.org/10.1016/j.compstruct.2018.05.058.
Wang, M., Y.-G. Xu, P. Qiao, and Z.-M. Li. 2019. “A two-dimensional elasticity model for bending and free vibration analysis of laminated graphene-reinforced composite beams.” Compos. Struct. 211: 364–375. https://doi.org/10.1016/j.compstruct.2018.12.033.
Wang, Z.-X., and H.-S. Shen. 2012. “Nonlinear dynamic response of nanotube-reinforced composite plates resting on elastic foundations in thermal environments.” Nonlinear Dyn. 70 (1): 735–754. https://doi.org/10.1007/s11071-012-0491-2.
Winkler, E. 1867. Die Lehre von der Elasticitaet und Festigkeit. Berlin: Dominicus.
Wu, H., S. Kitipornchai, and J. Yang. 2016. “Thermo-electro-mechanical postbuckling of piezoelectric FG-CNTRC beams with geometric imperfections.” Smart Mater. Struct. 25 (9): 095022. https://doi.org/10.1088/0964-1726/25/9/095022.
Zhang, L. W., and B. A. Selim. 2017. “Vibration analysis of CNT-reinforced thick laminated composite plates based on Reddy’s higher-order shear deformation theory.” Compos. Struct. 160: 689–705. https://doi.org/10.1016/j.compstruct.2016.10.102.
Zhang, L. W., Y. Zhang, G. L. Zou, and K. M. Liew. 2016. “Free vibration analysis of triangular CNT-reinforced composite plates subjected to in-plane stresses using FSDT element-free method.” Compos. Struct. 149: 247–260. https://doi.org/10.1016/j.compstruct.2016.04.019.
Zhu, P., Z. X. Lei, and K. M. Liew. 2012. “Static and free vibration analyses of carbon nanotube-reinforced composite plates using finite element method with first order shear deformation plate theory.” Compos. Struct. 94 (4): 1450–1460. https://doi.org/10.1016/j.compstruct.2011.11.010.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 17, 2018
Accepted: Mar 19, 2019
Published online: May 31, 2019
Published in print: Sep 1, 2019
Discussion open until: Oct 31, 2019
ASCE Technical Topics:
- Composite materials
- Continuum mechanics
- Deformation (mechanics)
- Dilatancy
- Dynamic response
- Dynamics (solid mechanics)
- Elastic analysis
- Elastic foundations
- Engineering materials (by type)
- Engineering mechanics
- Fluid mechanics
- Foundations
- Geotechnical engineering
- Hydrologic engineering
- Materials engineering
- Plates
- Shear deformation
- Solid mechanics
- Stress (by type)
- Structural analysis
- Structural engineering
- Structural mechanics
- Structural members
- Structural systems
- Transverse shear
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.