Heat Transfer Behaviors on Combinational Insulation of Spray-On Foam and Variable Density Multilayer for Cryogenic Propellant Tanks
Publication: Journal of Aerospace Engineering
Volume 32, Issue 4
Abstract
Efficient and reliable thermal insulation for cryogenic propellant storage in orbit is an essential ingredient for long-duration missions in future space exploration. A new combinational thermal insulation composed of spray-on foam insulation (SOFI) and variable density multilayer insulation (VD-MLI), is suitable for cryogenic propellant storage due to its excellent heat insulation and light quality. Based on the heat transfer calculation model of SOFI/VD-MLI for ground and space stages, the variations of total heat flux through the combinational insulation with the thickness of SOFI and VD-MLI, the warm boundary temperature, and storage medium were analyzed. Comparison between numerical results and experimental results from the literature shows that the model is feasible to be applied in engineering. In the ground stage, the heat flux through the SOFI/VD-MLI decreases by approximately 92.7% with a SOFI thickness of 10 mm than 150 mm in the condition of constant VD-MLI thickness, and declines by 8.4% with the VD-MLI thickness of 10 mm than 150 mm in the condition of constant SOFI thickness. In the space stage, however, the descent degree of the heat flux is approximately 13% and 90%, respectively, in the corresponding aforementioned conditions. Because the warm boundary temperature is constant, the total heat flux through the combinational insulation will be less sensitive to the storage medium. Furthermore, variations in VD-MLI thermal resistance and heat fluxes by solid heat conduction and heat radiation with layer position presented a jumping change at the interface of different layer density regions. The results show that there is an optimal combination thickness for SOFI and VD-MLI on the ground and in space.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Open Foundation of Science and Technology on Vacuum Technology and Physics Laboratory (Project No. ZDK201301).
References
Barrios, M., M. Vanderlaan, and S. V. Sciver. 2012. “Thermal conductivity of spray-on foam insulations for aerospace applications.” Am. Inst. Phys. 1434 (1): 1319–1326. https://doi.org/10.1063/1.4707057.
Chen, J. J., and W. D. Yu. 2010. “A numerical analysis of heat transfer in an evacuated flexible multilayer insulation material.” J. Therm. Anal. Calorim. 101 (3): 1183–1188. https://doi.org/10.1007/s10973-010-0683-2.
Dai, Y. C., X. S. Wang, H. Huang, and J. Guo. 2014. “Analysis and design of edge heat leakage from spacecraft multilayer insulation.” J. Astronautics 35 (1): 76–82. https://doi.org/10.3873/j.issn.1000-1328.2014.01.010.
Funke, T., and C. Haberstroh. 2012. “Performance measurements of multilayer insulation at variable cold temperature.” Am. Inst. Phys. 1434 (1): 1279–1284. https://doi.org/10.1063/1.4707051.
Funke, T., and C. Haberstroh. 2015. “A Calorimeter for measurements of multilayer insulation at variable cold temperature.” Physics Procedia 67 (7): 1062–1067. https://doi.org/10.1016/j.phpro.2015.06.201.
Haim, Y., Y. Weiss, and R. Letan. 2014. “Effect of spacers on the thermal performance of an annular multi-layer insulation.” Appl. Therm. Eng. 65 (1): 418–421. https://doi.org/10.1016/j.applthermaleng.2014.01.041.
Hastings, L. J., A. Hedayat, and T. M. Brown. 2004. Analytical modeling and test correlation of variable density multilayer insulation for cryogenic storage. Washington, DC: NASA.
Hastings, L. J., D. W. Plachta, L. Salerno, and P. Kittel. 2002. “An overview of NASA efforts on zero boil off storage of cryogenic propellants.” Cryogenics 41 (11): 833–839. https://doi.org/10.1002/smr.397.
Hu, W. F., L. Shen, J. M. Yang, and W. He. 2009. “Progress of study on transpiration control technology for orbit long-term applied cryogenic propellant.” Missiles Space Veh. 29 (6): 28–34. https://doi.org/10.1016/j.cja.2014.03.007.
Huang, C., and Z. Yue. 2014. “Calculation of high-temperature insulation parameters and heat transfer behaviors of multilayer insulation by inverse problems method.” Chin. J. Aeronaut. 27 (4): 791–796. https://doi.org/10.1016/j.cja.2014.03.007.
Huang, Y., B. Wang, S. Zhou, J. Wu, and G. Lei. 2017. “Modeling and experimental study on combination of foam and variable density multilayer insulation for cryogen storage.” Energy 123 (6): 487–498. https://doi.org/10.1016/j.energy.2017.01.147.
Jacob, S. 1992. “Investigations into the thermal performance of multilayer insulation (300-77 K) Part 1: Thermal analysis.” Cryogenics 32 (12): 1147–1153. https://doi.org/10.1016/0011-2275(92)90329-9.
Johnson, W. L., J. A. Demko, and J. E. Fesmire. 2010. “Analysis and testing of multilayer and aerogel insulation configurations.” Am. Inst. Phys. 1218 (1): 780–787. https://doi.org/10.1063/1.3422431.
Li, G. W., G. An, and N. Li. 2008. “Development and application of cryogenic liquid zero boil off storage technology.” Vac. Cryog. 14 (3): 172–176.
Li, P., and H. Cheng. 2006. “Thermal analysis and performance study for multilayer perforated insulation material used in space.” Appl. Therm. Eng. 26 (16): 2020–2026. https://doi.org/10.1016/j.applthermaleng.2006.01.004.
Li, P., P. J. Sun, Y. Y. Bao, and Q. Yao. 2012. “Research on long-term storage technology of cryogenic propellant in orbit.” Manned Spaceflight 18 (1): 30–36.
Li, Y. N., S. P. Chen, S. T. Yao, T. G. Wang, and L. H. Wang. 2013. “Study on SOFI/VD-MLI technology for ZBO storage.” Cryog. Supercond. 41 (12): 15–18.
Liu, Z., Y. Li, F. Xie, and K. Zhou. 2016. “Thermal performance of foam/MLI for cryogenic liquid hydrogen tank during the ascent and on orbit period.” Appl. Therm. Eng. 98 (7): 430–439. https://doi.org/10.1016/j.applthermaleng.2015.12.084.
Ma, Z. H., Q. Sun, X. J. Wang, and Y. Yang. 2003. TPS multi-layer insulation thermal analysis and performance study.” J. Astronautics 24 (5): 543–546.
Miyakita, T., R. Hatakenaka, H. Sugita, M. Saitoh, and T. Hirai. 2014. “Development of a new multi-layer insulation blanket with non-interlayer-contact spacer for space cryogenic mission.” Cryogenics 64 (6): 112–120. https://doi.org/10.1016/j.cryogenics.2014.04.008.
Montgomery, R. B. 1947. “Viscosity and thermal conductivity of air and diffusivity of water vapor in air.” J. Meteorol. 4 (6): 193–196. https://doi.org/10.1175/1520-0469(1947)004%3C0193:VATCOA%3E2.0.CO;2.
Wang, B., Y. H. Huang, P. Li, P. J. Sun, and Z. C. Chen. 2016. “Optimization of variable density multilayer insulation for cryogenic application and experimental validation.” Cryogenics 80 (8): 154–163. https://doi.org/10.1016/j.cryogenics.2016.10.006.
Wenlian, Y., W. Tiangang, W. Xiaojun, W. Lihong, and Z An. 2012. “Heat transfer analysis of variable density multi-layer insulation for cryogenic storage tank.” Cryog. Supercond. 40 (12): 5–8.
Xiao, Z. H., R. S. Wang, Y. M. Shi, and A. Z. Gu. 2004. “Theoretical analysis of heat transfer of high vacuum multi-layers.” Chin. J. Vac. Sci. Technol. 24 (2): 113–117. https://doi.org/10.1088/1009-0630/6/5/011.
Xie, T., Y. L. He, and Z. X. Tong. 2016. “Analysis of insulation performance of multilayer thermal insulation doped with phase change material.” Int. J. Heat Mass Transfer 102 (11): 934–943. https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.078.
Yang, S. M., and W. Q. Tao. 2006. Heat transfer. Beijing: Higher Education Press.
Zhang, A., C. J. Yan, L. Chen, and W. L. Ye. 2013. “Computational analysis of variable density multilayer insulation based on the Lockheed mode.” Vac. Cryog. 19 (2): 90–94.
Zhu, M., C. Ding, and R. S. Wang. 2011. “Experimental investigation of thermal response on high-vacuum-multilayer-insulation (HVMLI) cryogenic tank after sudden, catastrophic loss of insulation vacuum (SCLIV).” Heat Transfer Res. 42 (6): 523–538. https://doi.org/10.1615/HeatTransRes.2012004228.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 32 • Issue 4 • July 2019
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 6, 2018
Accepted: Feb 25, 2019
Published online: May 6, 2019
Published in print: Jul 1, 2019
Discussion open until: Oct 6, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.