Modeling of an Exhaust Gas Cooler in a High-Altitude Test Facility of Large-Area Ratio Rocket Engines
Publication: Journal of Aerospace Engineering
Volume 28, Issue 1
Abstract
In this numerical study, the cooling of exhaust gas issued from a rocket engine in a ground test facility has been investigated by solving the three-dimensional governing equations. Simulations have been performed by employing discrete phase model with plain-orifice atomizer to cool the exhaust flow effectively by injecting the coolant (water) in the form of a fine spray. The effects of coolant flow rate, inlet gas temperature, injection pressure, injector diameter, gas cooler length, and distribution of water droplets on the cooling characteristics, such as the temperature at the gas cooler exit, droplet diameter, and percentage of unevaporated water have been discussed in detail. Simulations highlight that optimum particle diameter needs to be identified for effective cooling, and also uniform cooling of the exhaust gas is attained by employing staggered injector distribution (more injectors at the periphery compared to the core region). Predicted values of static temperature and pressure agree well with the experimental data obtained from a scaled-down model high-altitude test facility.
Get full access to this article
View all available purchase options and get full access to this article.
References
Annamalai, K., Visvanathan, K., Sriramulu, V., and Bhaskaran, K. A. (1998). “Evaluation of the performance of supersonic exhaust diffuser using scaled down models.” Exp. Therm. Fluid Sci., 17(3), 217–229.
Barrow, H., and Pope, C. W. (2007). “Droplet evaporation with reference to the effectiveness of water-mist cooling.” Appl. Energy., 84(4), 404–412.
Brin, A. A., Fisenko, S. P., and Khodyko, Y.A. (2011). “Characteristic features of evaporative cooling of droplets in high-temperature flows.” J. Eng. Phys. Thermophys., 84(2), 292–297.
Chauveau, C., Birouk, M., and Gökalp, I. (2011). “An analysis of the d2-law departure during droplet evaporation in micro gravity.” Int. J. Multiphas. Flow, 37(3), 252–259.
Fisenko, S. P., Brin, A. A., and Petruchik, A. I. (2004). “Evaporative cooling of water in a mechanical draft cooling tower.” Int. J. Heat Mass Tran., 47(1), 167–177.
Fluent 6.3. (2007). Computational fluid dynamics software user guide, Ansys Fluent India, Pune, India.
Kim, H., Lee, Y., Setoguchi, T., and Yu, S. (1999). “Numerical simulation of the supersonic flows in the second throat ejector-diffuser systems.” J. Therm. Sci., 8(4), 214–222.
Korlie, M. S. (2000). “Three-dimensional computer simulation of liquid drop evaporation.” Comput. Math. Appl., 39(12), 43–52.
Lebedev, P. I., Rybanin, S. S., and Stesik, L. N. (1981). “Heat and mass transfer of a liquid drop evaporating into a flow of gas capable of condensing.” Int. J. Heat Mass Trans., 24(4), 611–620.
Manikanda Kumaran, R., Balasubramanian, S., Kumaresan, K., Raja Manohar, D., Rajarathnam, S. M., and Sundararajan, T. (2008). “Performance characteristics of a gas cooler in a high altitude test facility.” Proc., Int. Conf. on Aerospace Science & Technology, INCAST-035, National Aerospace Laboratories, Bangalore, India.
Manikanda Kumaran, R., Sundararajan, T., and Raja Manohar, D. (2010). “Performance evaluation of second throat diffuser for high altitude testing of large area ratio rocket motors.” J. Propul. Power, 26(2), 248–258.
Manikanda Kumaran, R., Vivekanand, P. K., Sundararajan, T., Kumaresan, K., and Raja Manohar, D. (2009). “Optimization of second throat ejectors for high altitude test facility.” J. Propul. Power, 25(3), 697–706.
Sankaran, S., Satyanarayana, T. N. V., Annamalai, K., Visvanathan, K., Babu, V., and Sundararajan, T. (2002). “CFD analysis for simulated altitude testing of rocket motors.” Can. Aeronaut. Space J., 48(2), 153–161.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 9, 2013
Accepted: Aug 7, 2013
Published online: Aug 10, 2013
Discussion open until: Nov 5, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.