Effect of Fuel Injection Allocation on the Combustion Characteristics of a Cavity-Strut Model Scramjet
Publication: Journal of Aerospace Engineering
Volume 28, Issue 1
Abstract
The cavity-strut supersonic combustion organization method has been found to improve the combustion performance of ethylene in recent studies. In this work, liquid kerosene combustion experiments have been carried out in a model scramjet combustor with a cavity and small strut upstream of the cavity. The effect of fuel injection allocation between the transverse injectors at the strut leading surfaces and duct wall upstream of the cavity on the combustion characteristics has been investigated. In the experiments, a larger bench thrust increment, a higher specific impulse, and an improvement in isolating the interference from the downstream region have been obtained as more of the fuel was injected from the strut injectors. Increasing the strut injection proportion makes the combustion zone translate to the divergent segment downstream of the cavity, and leads to the dominant flow changing from subsonic to supersonic in the minor fuel-rich condition.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the China National Natural Science Foundation (No. 91216105, No. 91116001, No. 51121004).
References
Bagg, C. M. G., and Greendyke, R. (2009). “Computational analysis of strut induced mixing in a scram-jet.” AIAA Paper 2009-1253, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Bao, W., et al. (2012a). “Combustion characteristics using O2-pilot strut in a liquid-kerosene-fueled strut-based dual-mode scramjet.” Proc. Inst. Mech. Eng., Part G: J. Aerosp. Eng., 227(12), 1870–1880.
Bao, W., Zong, Y., Chang, J., and Cui, T. (2012b). “Effects of strut swept angle on the drag of scramjet.” Proc. Inst. Mech. Eng., Part G: J. Aerosp. Eng., 226(G4), 455–466.
Ben-Yakar, A., and Hanson, R. K. (2001). “Cavity flame-holders for ignition and flame stabilization in scramjets: An overview.” J. Propul. Power, 17(4), 869–877.
Cain, T., and Walton, C. (2002). “Review of experiments on ignition and flameholding in supersonic flow.” AIAA Paper 2002-3877, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Chang, X., Chen, L., Gu, H., and Yu, G. (2005a). “Experimental studies on model scramjet in a Mach 6 high enthalpy free-jet wind tunnel.” Shock Waves, 1–2, 891–896.
Chang, X., Gu, H., and Chen, L. (2005b). “Thrust and drag of a scramjet model with different combustor geometries.” AIAA Paper, 2005-3315, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Curran, E. (2001). “Scramjet engines: The first forty years.” J. Propul. Power, 17(6), 1138–1148.
Fan, X., Yu, G., and Li, J. (2007). “Combustion and ignition of thermally cracked kerosene in supersonic model combustor.” J. Propul. Power, 23(2), 317–324.
Fan, X., Yu, G., Li, J., Zhang, X., and Sung, C.-J. (2006). “Investigation of vaporized kerosene injection and combustion in a supersonic model combustor.” J. Propul. Power, 22(1), 103–110.
Freeborn, A. B., King, P. I., and Gruber, M. R. (2009). “Swept-leading-edge pylon effects on a scramjet pylon-cavity flameholder flowfield.” J. Propul. Power, 25(3), 571–582.
Fry, R. (2004). “A century of ramjet propulsion technology evolution.” J. Propul. Power, 20(1), 27–58.
Gerlinger, P., Stoll, P., Kindler, M., Schneider, F., and Aigner, M. (2008). “Numerical investigation of mixing and combustion enhancement in supersonic combustors by strut induced streamwise vorticity.” Aerosp. Sci. Technol., 12(2), 159–168.
Gerstein, M., and Choudhury, P. R. (1985). “Use of silane-methane mixtures for scramjet ignition.” J. Propul. Power, 1(5), 399–402.
Ghodke, C. D., Choi, J. J., Srinivasan, S., and Menon, S. (2011). “Large eddy simulation of supersonic combustion in a cavity-strut flameholder.” AIAA Paper 2011-323, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Grady, N. R., Friedlander, T., Pitz, R. W., Carter, C. D., and Hsu, K.-Y. (2010). “Hydroxyl tagging velocimetry in a supersonic flow over a piloted cavity.” AIAA Paper 2010-1405, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Grady, N. R., Pitz, R. W., Carter, C. D., Hsu, K.-Y., Ghodke, C., and Menon, S. (2012). “Supersonic flow over a ramped-wall cavity with an upstream strut.” J. Propul. Power, 28(5), 982–990.
Gruenig, C., and Mayinger, F. (1999). “Supersonic combustion of kerosene/H2-mixtures in a model scramjet combustor.” Combust. Sci. Technol., 146(1–6), 1–22.
Gu, H., Chen, L., Wang, D., Chang, X., Li, Z., and Yu, X. (2012). “Experimental investigation on coupling characteristics of cavity flameholder and strut jet.” AIAA Paper 2012-5961, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Hank, J. M., Murphy, J. S., and Mutzman, R. C. (2008). “The X-51A scramjet engine flight demonstration program.” AIAA Paper 2008-2540, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Heiser, W. H., Pratt, D. T., Daley, D. H., and Mehta, U. B. (1994). “Hypersonic airbreathing propulsion.” AIAA education series, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA, 362–365.
Hsu, K.-Y., Carter, C. D., Gruber, M. R., Barhorst, T., and Smith, S. (2010). “Experimental study of cavity-strut combustion in supersonic flow.” J. Propul. Power, 26(6), 1237–1246.
Huang, W., Pourkashanian, M., Ma, L., Ingham, D. B., Luo, S., and Wang, Z. (2011). “Investigation on the flameholding mechanisms in supersonic flows: Backward-facing step and cavity flameholder.” J. Visual., 14(1), 63–74.
Mathur, T., et al. (2000). “Liquid JP-7 combustion in a scramjet combustor.” AIAA Paper 2000-3581, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Mitani, T., Hiraiwa, T., Tarukawa, Y., and Masuya, G. (2002a). “Drag and total pressure distributions in scramjet engines at Mach 8 flight.” J. Propul. Power, 18(4), 953–960.
Mitani, T., Izumikawa, M., Watanabe, S., and Tarukawa, Y. (2002b). “Force measurements of fixed-geometry scramjet engines from Mach 4 to 8 flight conditions.” AIAA Paper 2002-5151, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Powell, O. A., Edwards, J. T., Norris, R. B., Numbers, K. E., and Pearce, J. A. (2001). “Development of hydrocarbon-fueled scramjet engines: The hypersonic technology (HyTech) program.” J. Propul. Power, 17(6), 1170–1176.
Prisell, E. (2005). “The scramjet: A solution for hypersonic aerodynamic propulsion.” AIAA Paper 2005-3550, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Seiner, J., Dash, S., and Kenzakowski, D. (2001). “Historical survey on enhanced mixing in scramjet engines.” J. Propul. Power, 17(6), 1273–1286.
Semenov, V., Romankov, O., and Wie, D. (1998). “The investigation of operation domain of strut fuel feed system for model scramjet combustor.” AIAA Paper 1998-1514, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Su, Y., and Liu, W. (2009). “Experimental investigation on drag of strut.” J. Aerosp. Power, 24(12), 2643–2648 (in Chinese).
Sujith, S., Muruganandam, T. M., and Kurian, J. (2013). “Effect of trailing ramp angles in strut-based injection in supersonic flow.” J. Propul. Power, 29(1), 66–78.
Sunami, T., and Scheel, F. (2002). “Analysis of mixing enhancement using streamwise vortices in a supersonic combustor by application of laser diagnostics.” AIAA Paper 2002-5203, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Sunami, T., Wendt, M. N., and Nishioka, M. (1998). “Supersonic mixing and combustion control using streamwise vortices.” AIAA Paper 98-3271, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Takahashi, S., Yamano, G., Wakai, K., Tsue, M., and Kono, M. (2000). “Self-ignition and transition to flame-holding in a rectangular scramjet combustor with a backward step.” Proc. Combust. Inst., 28(1), 705–712.
Tam, C.-J., Hsu, K.-Y., Gruber, M. R., and Raffoul, C. N. (2008). “Fuel/air mixing characteristics of strut injections for scramjet combustor applications.” AIAA Paper 2008-6925, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Vinogradov, V. A., Shikhman, Y. M., and Segal, C. (2006). “Review of fuel pre-injection studies in a high speed airflow.” AIAA Paper 2006-1030, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Voland, R. T., Auslender, A. H., Smart, M. K., Roukakov, A. S., Semenov, V. L., and Kopchenov, V. (1999). “CIAM/NASA Mach 6.5 scramjet flight and ground test.” AIAA Paper 1999-4848, American Institute of Aeronautics and Astronautics (AIAA), Reston, VA.
Wei, B., Xu, X., Yan, M., Shi, X., and Yang, Y. (2012). “Study on integrated aeroramp injector/gas- pilot flame in a supersonic combustor.” J. Propul. Power, 28(3), 486–495.
Yu, G., Li, J., Zhao, J., Yue, L., Chang, X., and Sung, C. (2005). “An experimental study of kerosene combustion in a supersonic model combustor using effervescent atomization.” Proc. Combust. Inst., 30(1), 2859–2866.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 31, 2013
Accepted: Jul 17, 2013
Published online: Jul 25, 2013
Discussion open until: Nov 16, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.