Simplified Stress Design of Helicoidal HSS Beams
Publication: Journal of Architectural Engineering
Volume 26, Issue 1
Abstract
To facilitate the initial stress design of three-dimensional (3D) curved hollow structural steel (HSS) steel (i.e., helicoidal) beams and rapid early-stage topology decisions, a series of design charts and closed-form equations are presented that incorporate the effects of coupled forces and helicoidal geometry on stresses. These design aids were motivated by structures with extreme curves, featuring nonprismatic structural systems and nonplanar facades, which increasingly require the design of helicoidal elements. To establish these design aids, a converged beam model was developed for parametric studies of 71 different cross sections and a range of plan angles, lead angles, and beam radii. The results were curve-fitted, providing simplified stress utilization design equations expressed in terms of beam cross section ( and ). Results for the design equations and simplified design charts were within 1.5% and 5% of detailed finite-element analysis (FEA), respectively. The design aids were compared to two-dimensional (2D) projection methods and 3D helicoidal slab equations showing that the projection methods were able to be nonconservative by up to 34%, whereas the design aids were overconservative by up to 5% compared with the detailed FEA.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge West Edge Metals for providing pictures of past helicoidal beam projects that were designed by using the methods presented here. The authors are also very grateful to the advice of Dr. Paul Nowak, which resulted in clearer design charts for practical application.
References
ACI (American Concrete Institute) and ISO. 2008. Building code requirements for structural concrete (ACI 318-08) and commentary. ACI 318. Farmington Hills, MI: ACI.
AISC. 2016. Manual of steel construction, load and resistance factor design. Chicago: AISC.
Bangash, M. Y. H., and T. Bangash. 1999. Staircases: Structural analysis and design. Rotterdam, Netherlands: A.A. Balkema.
Bergman, V. R. 1956. “Helicoidal staircases of reinforced concrete.” ACI J. Proc. 53 (10): 403–412. https://doi.org/10.14359/11521.
Besjak, C., P. Biswas, and A. Thewis. 2013. “Chatrapati Shivaji International Airport—Integrated terminal building.” Struct. Eng. Int. 23 (1): 8–13. https://doi.org/10.2749/101686613X13363929988296.
Billewicz, W. 1932. “Analysis of stresses in circular elastic rings under the action of body forces and external loading.” Ph.D. thesis, Univ. of Michigan.
Gizaw, Y. 2015. “Analysis aid preparation for self supporting fixed ended helical stairs.” Ph.D. dissertation, Dept. of Civil Engineering, Addis Ababa Univ.
Hughes, A. F., D. C. Iles, and A. S. Malik. 2011. Design of steel beams in torsion. Ascot, UK: Steel Construction Institute.
International Code Council. 2015. Means of egress. Country Club Hills, IL: International Code Council.
Jesse, J. D., and J. A. Schultz. 2018. “Simplified design methods for HSS helicoidal steel beams.” In Proc., Structures Congress 2018: Buildings and Disaster Management, 68–79. Reston, VA: ASCE.
King, C., and D. Brown. 2001. Design of curved steel. Ascot, UK: Steel Construction Institute.
McMullen, D. K. 2005. “Helix pedestrian bridge.” Transp. Res. Rec. 11: 557–563. https://doi.org/10.3141/trr.11s.p4822g5j1vv11347.
Morgan, V. A. 1960. “Comparison of analysis of helical staircases.” Concr. Constr. Eng. 55 (3): 127–132.
Nethercot, D. A., P. R. Salter, and A. S. Malik. 1989. Design of members subject to combined bending and torsion. Ascot, UK: Steel Construction Institute.
Raftopoulos, D. D., and W. Qassem. 1987. “Biaxial bending stresses and stress factors in trapezoidal and elliptical cross-sectional curved beams.” Acta Mech. 68 (1–2): 71–94. https://doi.org/10.1007/BF01182017.
Schilling, C. G. 1965. “Buckling strength of circular tubes.” J. Struct. Div. 91 (5): 325–348. https://doi.org/10.14359/8127.
Scordelis, A. C. 1960. “Internal forces in uniformly loaded helicoidal girders.” J. Am. Concr. Inst. 56 (4): 1013–1025.
Skidmore Owings and Merrill. 2015. “Kunming Junfa Dongfeng square—MEP.” Accessed May 2, 2018. https://www.som.com/projects/kunming_junfa_dongfeng_square__mep.
Timoshenko, S., and J. N. Goodier. 1951. Theory of elasticity, 61–64. New York: McGraw-Hill.
Wadud, Z. 2002. “A simple design approach for helicoidal stair slabs.” M.Sc. Engineering thesis, Dept. of Civil Engineering, Bangladesh Univ. of Engineering and Technology.
Wadud, Z., and S. Ahmad. 2006. “Design charts for helicoidal stair slabs with landing at midspan.” J. Struct. Eng. 132 (2): 312–320. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(312).
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jun 20, 2018
Accepted: May 31, 2019
Published online: Oct 31, 2019
Published in print: Mar 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.