Structuring a Comprehensive Carbon-Emission Framework for the Whole Lifecycle of Building, Operation, and Construction
Publication: Journal of Architectural Engineering
Volume 22, Issue 3
Abstract
The construction industry is responsible for more than 40% of the carbon emissions in the United States. These emissions are generated by energy, water, and materials consumed at different stages of the construction, maintenance, operation, and disposal processes and during the recycling and reusing of construction components as materials or biomass. Carbon-emission modeling is a complex procedure of process and footprint integration for different components either directly and indirectly associated with a service, product, material, or system at different phases. Prior research focused on each phase separately and/or supplemental information from alternative sources because of the lack of available data and information. Even though there are comprehensive lifecycle models covering every phase of a project, these models do not integrate existing models. The purpose of this study was to develop a comprehensive framework of building lifecycle carbon-emission modeling that would integrate existing models, information, and data. This research integrated prior models and methods, incorporated multitier mechanisms, and developed flexibility within the model so that reliability would be improved for measuring, tracking, and quantifying carbon- and environmental-related features, factors, and variables. This paper discusses the first phase of the research, model development, and testing.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Sharif, L. R. (1996). “Lift power consumption.” Elevator World, 44(5), 85–87.
ANSI/ASHRAE/IES (American National Standards Institute/American Society of Heating, Refrigerating and Air Conditioning Engineers/Illuminating Engineering Society). (2013). “Energy standard for buildings except low-rise residential buildings.” Standard 90.1, ASHRAE, Atlanta.
ASTM. (1982). “Standard test methods for analysis of wood fuels.” E870-82, West Conshohocken, PA.
ASTM. (1984). Standard test method for ash in wood.” D1102-84, West Conshohocken, PA.
ASTM. (1987). “Standard test method for gross calorific value of refuse-derived fuel by the bomb calorimeter.” E711-87, West Conshohocken, PA.
ASTM. (2005). “Standard practice for outdoor weathering of construction seals and sealants.” C1589-05, West Conshohocken, PA.
ASTM. (2006). “Standard practice for operating fluorescent light apparatus for UV exposure of nonmetallic materials.” G154-06, West Conshohocken, PA.
ASTM. (2007). “Standard test methods for direct moisture content measurement of wood and wood-base materials.” D4442-07, West Conshohocken, PA.
ASTM. (2010a). “Standard test method for gross calorific value of coal and coke.” D5865-10a, West Conshohocken, PA.
ASTM. (2010b). “Standard practice for cyclic salt fog/UV exposure of painted metal (alternating exposures in a fog/dry cabinet and a UV/condensation cabinet).” D5894-10, West Conshohocken, PA.
ASTM. (2011). “Standard practice for atmospheric environmental exposure testing of nonmetallic materials.” G7/G7M-11, West Conshohocken, PA.
BCA (Building and Construction Authority). (2010). BCA Green Mark: Certification standard for new buildings GM version 3.0, Singapore.
BEA (U.S. Bureau of Economic Analysis). (2015). “News release.” 〈https://www.bea.gov/newsreleases/national/gdp/2015/pdf/gdp1q15_adv.pdf〉 (Apr. 10, 2015).
BREEAM (BRE Environmental Assessment Method). (2012). “Man 03 Construction site impacts.” 〈http://www.breeam.org/BREEAM2011SchemeDocument/Content/04_management/man03.htm〉 (Sept. 10, 2013).
Cannon Design. (2012). “Material life-embodied energy of a building.” 〈https://upstyleindustries.files.wordpress.com/2014/08/materiallife-embodied-energy-of-building-materials.pdf〉 (Oct. 31, 2013).
Carbon Retirement. (2013). “Carbon offset.” 〈http://www.carbonretirement.com〉 (Sept. 1, 2013).
Chong, W., and Hermreck, C. (2010). “Understanding transpiration energy and technical metabolism of construction of construction waste recycling.” Resour. Conserv. Recycl., 54(9), 579.
Consumer Council for Water. (2013). “Water meter calculator.” 〈http://www.ccwater.org.uk/server.php?show=nav.388〉 (Aug. 22, 2013).
DEFRA (Department for Environment Food and Rural Affairs). (2009). “2009 guidelines to DEFRA/DECC's GHG conversion factors for company reporting.” 〈http://www.defra.gov.uk/environment/business/reporting/pdf/20090928-guidelines-ghg-conversion-factors.pdf〉 (Feb. 17, 2010).
Dissou, Y. (2005). “Cost effectiveness of the performance standard system to reduce CO2 emissions in Canada: A general equilibrium analysis. Resour. Energ. Econ., 27(3), 187–207.
EIA (U.S. Energy Information Administration). (2011). “About EIA.” 〈http://www.eia.gov/about/〉 (Oct. 16, 2011).
EIA (U.S. Energy Information Administration). (2013). “How much electricity is used for lighting in the United States?” 〈http://www.eia.gov/tools/faqs/faq.cfm?id=99&t=3〉 (Sept. 1, 2013).
EPA (U.S. Environmental Protection Agency). (2010). Reducing urban heat islands: Compendium of strategies, Washington, DC.
Frohnsdorff, G. (1996). “Predicting the service lives of materials of construction.” Materials for the New Millennium Conference, Vol. 1, K. P. Chong, ed., ASCE, Reston, VA, 38–53.
GBC (U.S. Green Building Council). (2009). Green building design and construction reference guide, 2009 ed., Washington, DC.
Hermreck, C., and Chong, W. K. (2009). “Embodied energy and technical metabolism due to regional differences and building designs, building a sustainable future.” Proc., 2009 ASCE Construction Research Congress, ASCE, Reston, VA.
ICE. (2015). Inventory of carbon and energy, version 2.0., Circular Ecology Ltd., 〈http://www.circularecology.com/embodied-energy-and-carbon-footprint-database.html#.Vr4CSnldGzl〉.
IPCC (Intergovernmental Panel on Climate Change). (2007). Climate change 2007: Mitigation of climate change, summary for policymakers from IPCC fourth assessment report, Geneva.
Kable, J. (2006). Collecting construction equipment activity data from Caltrans project records, Univ. of California, Davis, CA.
Kelly, T. (2010). “Body heat: Sweden's new green energy source.” Time 〈http://www.time.com/time/health/article/0,8599,1981919,00.html〉 (Sept. 14, 2010).
Kimoto, K., and Ikaga, T. (2010). “Development of life cycle CO2 database for CASBEE—New construction and assessment of honeycomb tube high-rise building.” Proc., International Conf. on Sustainable Building Asia, SB10l, Korea Sustainable Building Research Center, Seoul, 141–146.
Mäkivierikko, A. (2009). CTG carbon calculator, Uppsala universitet/Institutionen för informationsteknologi, Uppsala, Sweden.
McDonough, W., and Braungart, M. (2002). Cradle to cradle: Remaking the way we make things, North Point Press, New York.
NIST (National Institute of Standards and Technology). (2011). “BEES online tutorial.” 〈http://ws680.nist.gov/Bees/(A(4adlR5muzwEkAAAANjZiOGVhMzYtMTIxYy00ODc2LWFiNzAtOGVjMmVhNjllZjBlQ8t6eKvtnd2F6NQBd_YiqT1c9RM1))/Help.aspx〉
O'Connor, J., and Bowick, M. (2014). “Advancing sustainable design with life cycle assessment.” 〈http://www.sabmagazine.com/blog/2014/09/23/ceu-article/〉
Oka, T., Suzuki, M., and Konnya, T. (1993). “The estimation of energy consumption and amount of pollutants due to the construction of buildings.” Energ. Build., 19(4), 303–311.
Power Efficiency Corporation. (1999). Escalator case study: Honolulu International Airport, Las Vegas, NV.
Radhi, H. (2009). “Evaluating the potential impact of global warming on the UAE residential buildings—A contribution to reduce the CO2 emissions.” Build. Environ., 44(12), 2451–2462.
Stein, C., Buckley, M., Green, M., and Stein, R. G. (1981). Handbook of energy use for building construction, Technical Information Center, Oak Ridge, TN.
Suzuki, M., and Oka, T. (1998). “Estimation of life cycle energy consumption and CO2 emission of office buildings in Japan.” Energ. Build., 28(1), 33–41.
SWFWMD (Southwest Florida Water Management District). (2013). “Water use calculator.” 〈http://www.swfwmd.state.fl.us/conservation/thepowerof10/〉 (Aug. 22, 2013).
USGBC (U.S. Green Building Council). (2013). LEED reference guide for building design and construction, LEED V4, Washington, DC.
ürge-Vorsatz, D., Harvey, L. D., Mirasgedis, S., and Levine, M. D. (2007). “Mitigating CO2 emissions from energy use in the world's buildings.” Build. Res. Inf., 35(4), 379–398.
Vieira, P. S., and Horvath, A. (2008). “Assessing the end-of-life impact of buildings.” Environ. Sci. Tech., 42(13), 4663–4669.
Willmott Dixon Re-Thinking Limited. (2010). Embodied energy, Letchworth, U.K.
WRI (World Resources Institute). (2010). “World GHG emissions flow chart.” 〈http://www.ecofys.com/files/files/asn-ecofys-2013-world-ghg-emissions-flow-chart-2010.pdf〉 (May 4, 2010).
Zamagni, A., et al. (2008). “Critical review of the current research needs and limitations related to ISO-LCA practice. Deliverable D7 of work package.” 〈http://www.leidenuniv.nl/cml/ssp/publications/calcas_report_d7.pdf〉.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 22 • Issue 3 • September 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 11, 2015
Accepted: Jan 29, 2016
Published online: Mar 11, 2016
Discussion open until: Aug 11, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.