Current Industry Methods for Quantifying Energy Service Projects: Key Findings and Lessons Learned
Publication: Journal of Architectural Engineering
Volume 22, Issue 2
Abstract
The use of energy service performance contracts (ESPCs) has become a popular method for financing energy conservation upgrades. To date, the use of the stipulated savings approach, often expressed as tables and equations, has been a popular method for calculating energy savings in ESPCs. However, no studies to date have confirmed or denied the literature findings regarding the use and acceptance of this method in the current industry through a systematic investigation. Therefore, this research identified other practices by conducting an ethnographic study with subject-matter experts, by reviewing publicly available technical reference manuals, and by analyzing a typical utility assessment report from a recent ESPC. In particular, the methods for quantifying lighting and lighting control measures were explored in detail. The findings indicate that the current industry relies on a stipulated savings method as a foundation for determining the baseline and postretrofit savings. In addition, the current industry relies on experienced engineers and their valuable tactical and institutional knowledge to build upon the stipulated equations and tailor them to individual projects.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (1989). Energy code for buildings except low-rise residential buildings, Atlanta.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). (2014). “Measurement of energy, demand, and water savings.” ASHRAE guideline 14-2014, Atlanta.
Belzer, D. (2009). Energy efficiency potential in existing commercial buildings: Review of selected recent studies, Pacific Northwest National Laboratory, Richland, WA.
CenterPoint Energy. (2013). 2013 commercial standard offer program manual. Section 2: Measurement and verification guidelines for retrofit projects, Houston.
Cleff, P., West, A., Haeri, H., and Jayaweera, T. (2011). “Impact evaluation research design in a post TRM world.” Proc., Int. Energy Program Evaluation Conf., International Energy Program Evaluation Conference, Boston.
Connecticut Lighting & Power Company, and the United Illuminating Company. (2007). “CL&P and UI program savings documentation for 2008 program year.” 〈http://www.energizect.com/sites/default/files/Final%202008%20Program%20Savings%20Document0.pdf〉 (Oct. 7, 2014).
DOE. (2011). “Energy savings performance contracting: The investment grade audit. DOE technical assistance program.” 〈http://energy.gov/sites/prod/files/2014/05/f15/espcinvestmentgradeaudit.pdf〉 (Mar. 27, 2015).
DOE. (2012). International performance measurement and verification protocol, Washington, DC.
DOE-2 [Computer software]. James J. Hirsch & Associates, Camarillo, CA; and Lawrence Berkeley National Laboratory, Berkeley, CA.
Effinger, J., Friedman, H., Morales, C., Sibley, E., and Tingey, S. (2009). A study on energy savings and measure cost effectiveness of existing building commissioning, Portland Energy Conservation, Inc., Portland, OR.
Entergy. (2011). “M&V guidelines for lighting efficiency measures.” Program manual v1.0, 〈http://www.entergy-texas.com/content/Energy_Efficiency/documents/sim-lighting.pdf〉 (Aug. 13, 2014).
Environmental Protection Agency. (2008). “National action plan for energy efficiency vision for 2025: A framework for change.” 〈http://www.epa.gov/eeactionplan〉 (Aug. 1, 2013).
Gowans, D. (2013). “Commercial and industrial lighting evaluation protocol.” Chapter 2, The uniform methods project: Methods for determining energy efficiency savings for specific measures, National Renewable Energy Laboratory, Washington, DC.
Granade, H. C., Creyts, J., Derkach, A., Farese, P., Nyquist, S., and Ostrowski, K. (2009). Unlocking energy efficiency in the U.S. economy executive summary, McKinsey and Company, New York.
Haberl, J., Claridge, D., and Culp, C. (2005). “ASHRAE’s Guideline 14-2002 measurement of energy and demand savings: How to determine what was really saved by the retrofit.” Proc., 5th Int. Conf. for Enhanced Building Operation, Energy Systems Laboratory, College Station, TX.
Haberl, J., Lopez, R., and Sparks, R. (1992). LoanSTAR monitoring and analysis program: Building energy monitoring workbook, Texas A&M Univ., College Station, TX.
Haberl, J. S., and Thamilseran, S. (1996). “The great energy predictor shootout II: Measuring retrofit savings—Overview and discussion of results.” ASHRAE Trans., 102(2), 419–435.
Hirsch, J. J. (2009). “eQUEST the QUick energy simulation tool.” 〈http://www.doe2.com/equest/〉 (July 30, 2014).
ICF International, and NAESCO (National Association of Energy Service Companies). (2007). Introduction to energy performance contracting, ENERGY STAR, U.S. Environmental Protection Agency, Washington, DC.
Itron, Inc., J. H. A., and Synergy Consulting, Quantum, Inc. (2005). “2004–2005 Database for Energy Efficiency Resources (DEER) updated study final report,” Southern California Edison, Rosemead, CA.
Itron, Inc., KEMA, and Hirsh, J. J. (2011). DEER database: 2011 update documentation, California Public Utility Commission, San Francisco.
Jacobs, P. C., Hancock, C. E., Roberts, D. R., Wortman, D. N., Reeves, P. S., and Porter, F. W. (1992). Engineering methods for estimating the impacts of demand-side management programs, Electric Power Research Institute, Palo Alto, CA.
Jayaweera, T., et al. (2011). Scoping study to evaluate feasibility of national databases for EM&V documents and measure savings, State & Local Energy Efficiency Action Network, Berkeley, CA.
Jayaweera, T., Velonis, A., Haeri, H., Goldman, C. A., and Schiller, S. R. (2012). “Status and opportunities for improving the consistency of technical reference manuals.” Proc., ACEEE Summer Study on Energy Efficiency in Buildings, American Council for an Energy-Efficient Economy, Washington, DC, 5-233–5-244.
KEMA, Inc. (2013). “Impact evaluation of 2010 prescriptive lighting installations final report,” Massachusetts Energy Efficiency Program Administrators, Massachusetts Energy Efficiency Advisory Council, Boston.
Marshall, J. (1981). “Making sense as a personal process.” Human inquiry: A sourcebook of new paradigm research, P. Reason, and J. Rowan, eds., J. Wiley, Chichester, U.K., 395–399.
Massachusetts Electric and Gas Energy Efficiency Program Administrators. (2011). Massachusetts technical reference manual for estimating savings from energy efficiency measures, Boston.
Mostyn, B. (1985). “The content analysis of qualitative research data: A dynamic approach.” The Research interview, uses and approaches, M. Brenner, J. Brown, and D. V. Canter, eds., Academic Press, London.
Pacific Gas and Electric Company, Southern California Edison, and Sempra Utilities. (2011). “Draft measure information template—Indoor lighting controls.” 2013 California building energy efficiency standards, Pacific Gas and Electric Company, Oakland, CA.
PNNL (Pacific Northwest National Laboratory). (2011). Advanced energy retrofit guide: Office buildings, Richland, WA.
Public Service Company of Colorado. (2011). 2012/2013 demand-side management plan, Xcel Energy, Minneapolis.
Rundquist, R. A., Johnson, K. F., and Aumann, D. J. (1993). “Calculating lighting and HVAC interactions.” ASHRAE J., 35(11), 28–37.
Saidur, R. (2010). “Energy, economics and environmental analysis for chillers in office buildings.” Energy Educ. Sci. Tech. Part A, 25(1–2), 1–16.
Seidman, I. (1998). Interviewing as qualitative research: A guide for researchers in education and the social sciences, Teachers College Press, New York.
Shipley, A., and Elliott, N. (2006). Ripe for the picking: Have we exhausted the low-hanging fruit in the industrial sector? American Council for an Energy-Efficient Economy, Washington, DC.
Stern, F. (2013). “Peak demand and time-differentiated energy savings cross-cutting protocols.” Chapter 10, The uniform methods project: Methods for determining energy efficiency savings for specific measures, National Renewable Energy Laboratory, Golden, CO.
Summit Blue Consulting. (2008). “Large commercial and industrial retrofit program impact evaluation 2007.” Rep. prepared for National Grid, Boulder, CO.
Webster, L., and Bradford, J. (2008). M&V guidelines: Measurement and verification for federal energy projects version 3.0, Nexant, Inc., Boulder, CO.
Yu, P. C. H., and Chow, W. K. (2007). “A discussion on potentials of saving energy use for commercial buildings in Hong Kong.” Energy, 32(2), 83–94.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 22 • Issue 2 • June 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 9, 2014
Accepted: Aug 3, 2015
Published online: Dec 30, 2015
Discussion open until: May 30, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.