Global Differences in Building Enclosures
Publication: Journal of Architectural Engineering
Volume 20, Issue 3
Abstract
Successful design and construction of building enclosures on foreign projects presents a challenge for those who are new to international business. In addition to basic building enclosure functional requirements (i.e., structural, acoustics, heat control, air control, and moisture control), professionals must accommodate local considerations of a building project’s site, which vary globally from market to market and are not always clearly understood in the early stages of a project. This study consists of 29 interviews conducted with building enclosure professionals who have significant experience working in the following five global markets: Europe, Far East, Latin America, Middle East, and North America. The interviewees stated that there are significant global differences that affected how they perform services in relation to the design and construction of building enclosures on mainstream, modern, low-to-midrise commercial buildings across each market. The study found 13 factors that account for global differences in building enclosures, with codes and standards the most frequently cited factor, although not all 13 factors were deemed important in a given global market. The authors summarize common perceptions of the design and construction of building enclosures for each global market studied as experienced by the interviewees. These perceptions provide a firsthand narrative of global differences that can exist when conducting building enclosure work internationally. Such a narrative could be of use in preparing those new to international work in market-specific design and construction considerations for building enclosures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported in part by the Leonhard Center for the Enhancement of Engineering Education at Pennsylvania State University, whose support is gratefully acknowledged. Any opinions, results, and conclusions are those of the authors and do not necessarily represent the views of the Leonhard Center. The authors also express their sincere gratitude to all research participants who contributed to this study.
References
Al-Asad, M. (2012). Contemporary architecture and urbanism in the Middle East, University Press of Florida, Gainesville, FL.
American Architectural Manufacturers Association (AAMA). (2009) “Quality assurance and diagnostic water leakage field check of installed storefronts, curtain walls, and sloped glazing systems.” AAMA 501.2, Schaumburg, IL.
American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). (2010). “Energy standard for buildings except low-rise residential buildings.” ASHRAE 90.1-2010, Atlanta.
Arnold, C. (2009). “Building envelope design guide—Introduction.” Whole building design guide, 〈http://www.wbdg.org/design/env_introduction.php〉 (Jan. 8, 2013).
ASTM. (2010). “Standard test method for field measurement of air leakage through installed exterior windows and doors.” ASTM E783-02, West Conshohocken, PA.
Bahaj, A., James, P., and Jentsch, M. (2008). “Potential of emerging glazing technologies for highly glazed buildings in hot arid climates.” Energy Build., 40(5), 720–731.
Bilow, M. (2012). International facades—CROFT, Sirene Ontwerpers, Rotterdam, Netherlands.
Building Research Establishment Environmental Assessment Method (BREEAM). (2012). BREEAM Europe commercial assessment manual 2009, BRE Global, Garston, U.K.
Christ, G., and Furness, A. (2011) “Number of LEED-certified buildings growing.” Austin Business J. 〈http://www.bizjournals.com/austin/news/2011/04/14/number-of-leed-certified-buildings.html〉 (Feb. 23, 2013).
Gill, P., Stewart, K., Treasure, E., and Chadwick, B. (2008). “Methods of data collection in qualitative research: Interviews and focus groups.” Br. Dent. J., 204(6), 291–295.
Goncalves, J., and Umakoshi, E. (2010). The environmental performance of tall buildings, Earthscan, London.
Gunhan, S., and Arditi, D. (2005). “International expansion decision for construction companies.” J. Constr. Eng. Manage., 928–937.
Javernick-Will, A., and Scott, W. (2010). “Who needs to know what? Institutional knowledge and global projects.” J. Constr. Eng. Manage., 546–557.
Knight, A., and Ruddock, L., eds. (2008) Advanced research methods in the built environment, Wiley, Oxford, U.K.
Kragh, M. (2010). “Façade engineering & the design teams of the future.” Intelligent Glass Solutions, 4, 30–36.
Lau, A. (2012). “Masdar City: A model of urban environmental sustainability.” Stanford Undergraduate Res. J., 12, 77–82.
Ledbetter, S., Austwick, K., and Gray, R. F. (1992). A comparative study of the façade industry in the U.K., Europe, Japan, and the USA, Centre for Window and Cladding Technology, Bath, U.K.
Lord, M., and Ranft, A. (2000). “Organizational learning about new international markets: Exploring the internal transfer of local market knowledge.” J. Int. Bus. Stud., 31(4), 573–589.
Marshall, G. (2009) “Glass facades in South America—Transferring technologies.” Proc., 11th Int. Conf. Glass Performance Days, Glass Performance Days, Tampere, Finland.
McConville, J. (1996). International construction costs and reference data yearbook, Wiley-Interscience, New York.
Ngowi, A., Pienaar, E., Talukhaba, A., and Mbachu, J. (2005). “The globalization of the construction industry—A review.” Build. Environ., 40(1), 135–141.
NVIVO 10.0 [Computer software]. Doncaster, VIC, Australia, QSR International. 〈http://www.qsrinternational.com/products_nvivo.aspx〉 (Jan. 13, 2013).
Petersen, B., Pedersen, T., and Lyles, M. A. (2008). “Closing knowledge gaps in foreign markets.” J. Int. Bus. Stud., 39(7), 1097–1113.
Ramcharran, H. (1998). “Obstacles and opportunities in international engineering services.” J. Manage. Eng., 38–47.
Reed, S. (2012). “High energy costs plaguing Europe.” New York Times, Dec. 26. 〈http://www.nytimes.com/2012/12/27/business/energy-environment/27iht-green27.html?_r=0〉 (Feb. 17, 2013).
Santos, S. (2007). Enclosure masonry wall systems worldwide: Typical masonry wall enclosures in Belgium, Brazil, China, France, Germany, Greece, India, Italy, Nordic Countries, Poland, Portugal, Netherlands and U.S.A., Taylor & Francis, London.
Straube, J., and Burnett, E. (2005). Building science for building enclosures, Building Science Press, Westford, MA.
United Nations (UN). (2004). “World population to 2030.” ST/ESA/SER.A/236, UN Dept. of Economic and Social Affairs, Population Division, New York.
U.S. Green Building Council (USGBC). (2012). LEED 2009 for new construction and major renovations, Washington, DC.
Yates, J. (2007). Global engineering and construction, Wiley, Hoboken, NJ.
Yudelson, J. (2009). Green building trends: Europe, Island Press, Washington, DC.
Zaheer, S. (1995). “Overcoming the liability of foreignness.” Acad. Manage. J., 38(2), 341–363.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 24, 2013
Accepted: Dec 17, 2013
Published online: Feb 17, 2014
Discussion open until: Jul 17, 2014
Published in print: Sep 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.