Influence of Micromaterial Heterogeneity on Strain Localization in Granular Materials
Publication: International Journal of Geomechanics
Volume 6, Issue 4
Abstract
Lade’s constitutive model was modified to incorporate the couple stress and the particle’s rotation within the framework of the Cosserat continuum. The finite element equations were implemented in the finite-element program (ABAQUS) to predict the strain localization (shear bands) in granular materials. Material spatial heterogeneity such as local void ratio, particle size, surface roughness and shape indices was mapped into the finite element mesh to account for the local heterogeneity of the material properties. The model was found to respond well to such spatial heterogeneities and the results compare well with experiments. The material spatial distributions were generated using scanning electron microscope and optical microscope images. The surface roughness and the shape indices were found to affect the shear band thickness; a parametric study was performed and such effects were found to be significant. The shear band thickness was found to increase as the surface roughness of the particles, particle size, and the particle angularity index increase while it tends to decrease as the particle sphericity, initial density and the confining pressure increase.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided by NASA/George C. Marshall Space Flight Center under Contract No. NASANAS8-01042. They also acknowledge the computational support in software and hardware provided by the Advanced Computational Solid Mechanics Laboratory at Louisiana State University.
References
Alsaleh, M. A., Alshibli, K. A., and Voyiadjis, G. Z. (2004). “On the bridging of the length scale and the behavior of granular materials.” Geo Jordan 2004: Advances in geotechnical engineering with emphasis on dams, highway materials, and soil improvement, ASCE geotechnical practical publication no. 1, Irbid, Jordan, 191–199.
Alshibli, K. A., and Alsaleh, M. I. (2004). “Characterizing surface roughness and shape of stands using digital microscopy.” J. Comput. Civ. Eng., 18(1), 36–45.
Alshibli, K. A., and Sture, S. (1999). “Sand shear band thickness measurements by digital imaging techniques.” J. Comput. Civ. Eng., 13(2), 103–109.
Alshibli, K. A., and Sture, S. (2000). “Shear band formation in plane strain experiments of sand.” J. Geotech. Geoenviron. Eng., 126(6), 495–503.
Bathe, K. J. (1990). Finite-element procedures in engineering analysis, Prentice-Hall, New Delhi, India.
Gudehus, G., and Nübel, K. (2004). “Evolution of shear bands in sand.” Geotechnique, 54(3), 187–201.
Han, C., and Drescher, A. (1993). “Shear bands in biaxial tests on dry coarse sand.” Soils Found., 33, 118–132.
Huang, W., Nübel, K., and Bauer, E. (2002). “Polar extension of a hypoplastic model for granular materials with shear localization.” Mech. Mater., 34, 563–576.
Kim, M. K., and Lade, P. V. (1988). “Single hardening constitutive model for frictional materials.” Comput. Geotech., 5, 307–324.
Lade, P. V., and Kim, M. K. (1988). “Single hardening plasticity model for frictional materials.” Comput. Geotech., 6, 13–29.
Lade, P. V., and Nelson, R. B. (1987). “Modeling the elastic behavior of granular materials.” Int. J. Numer. Analyt. Meth. Geomech., 11, 521–542.
Mokni, M., and Desrues, J. (1998). “Strain localization measurements in undrained plane-strain biaxial tests on Hostun RF sand.” Mech. Cohesive-Frict. Mater., 4, 419–441.
Nemat-Nasser, S., and Okada, N. (1998). “Strain localization in particulate media.” Proc., 12th Engineering Mechanics Conf., H. Murakami and J. E. Luco, eds., La Jolla, Calif., 1009–1012.
Oda, M., and Iwashita, I. (1999). Mechanics of granular materials: An introduction, A. A. Balkema, Rotterdam, The Netherlands.
Powers, M. C. (1982). “Comparison charts for estimating roundness and sphericity.” AGI Data Sheets, American Geological Institute.
Tejchman, J. (2002). “Patterns of shear zones in granular bodies within a polar hypoplastic continuum.” Acta Mech., 155(1-2), 71–95.
Tomantschger, K. W. (2002). “A boundary value problem in the micropolar theory.” Z. Angew. Math. Mech., 82(6), 421–422.
Vardoulakis, I. (1978). “Equilibrium bifurcation of granular earth bodies.” Adv. Anal. Geotech. Instabilities., 13, 65–120.
Vardoulakis, I., and Sulem, J. (1995). Bifurcation analysis in geomechanics, Blackie Academic and Professionals.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Aug 11, 2004
Accepted: Jul 18, 2005
Published online: Jul 1, 2006
Published in print: Jul 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.