Probabilistic Models for Spatially Varying Mechanical Properties of In-Service GFRP Cladding Panels
Publication: Journal of Composites for Construction
Volume 13, Issue 2
Abstract
The physical uncertainty associated with fiber-reinforced polymer composites has to be quantified and dealt with for their widespread use to be reliable. Developing probabilistic models based on experimental studies form an important part of this task. In the present paper, such models are developed for glass fiber-reinforced polymer (GFRP) composites based on an experimental study on panels obtained from Mondial House, a old building demolished in 2006 in London. Having an average size of and made of chopped strand mat composites, these panels have been exposed to varying ambient conditions, protected only by a fire retardant gel coat for self-cleaning. Tensile and compressive tests are performed to quantify the variability in stiffness and strength properties of these panels. Intra- and interpanel effects and correlations between random variables are studied using statistical methods. A range of probability distributions is tested and suggestions are made with regard to their suitability for modeling different mechanical and geometric properties.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided for this study by the Engineering and Physical Sciences Research Council (EPSRC) and the Ministry of Defence (MOD), U.K. Thanks are also due to the U.K. Network Group for Composites in Construction (NGCC), and in particular to Dr Sue Halliwell, for sourcing the GFRP panels.
References
ASTM International. (2006). “Standard test method for tensile properties of polymer matrix composite materials.” ASTM book of standards, D3039/D 3039M, Vol. 15.03, Philadelphia.
Barbero, E., Fernández-Sáez, J., and Navarro, C. (2000). “Statistical analysis of the mechanical properties of composite materials.” Composites, Part B, 31(5), 375–381.
BSI. (1999). “Fibre-reinforced plastic composites—Determination of compressive properties in the in-plane direction.” BSI EN ISO 14126, London.
Chamis, C. C., and Shiao, M. C. (1993). “Probabilistic assessment of composite structures.” NASA Tech. Memo., 106024, Washington, D.C.
Clarke, J. L. (1996). “Structural design of polymer composites.” Eurocomp design code and handbook, E & FN Spon, London.
Department of Defense. (2002). “Polymer matrix composites: Guidelines for characterization of structural materials.” Rep. No: DOD-MIL-HDBK-17-1F, Composite Materials Handbook, Vol. 1, Washington, D.C.
Halliwell, S. (2004). “In-service performance of glass reinforced plastic composites in buildings.” Proc. Inst. Civ. Eng., Struct. Build., 157(1), 99–104.
Jeong, H. K., and Shenoi, R. A. (2000). “Probabilistic strength analysis of rectangular FRP plates using Monte Carlo simulation.” Comput. Struct., 76(3), 219–235.
Johnson, A. F. (1979). Engineering design properties of GRP, The British Plastics Federation, London.
Joint Committee of Structural Safety (JCSS). (2001). “Probabilistic model code.” ⟨http://www.jcss.ethz.ch⟩ (Jan. 15, 2008).
Lindman, H. R. (1974). Analysis of variance in complex experimental designs, W. H. Freeman, San Francisco.
Mallick, P. K. (2000). “Particulate and short fiber reinforced polymer composites.” Comprehensive composite materials, Vol. 2, A. Kelly and C. Zweben, eds., Elsevier, Amsterdam, The Netherlands, 291–331.
Ostoja-Starzewski, M. (2006). “Material spatial randomness: From statistical to representative volume element.” Probab. Eng. Mech., 21(2), 112–132.
Sims, G. D., and Broughton, W. R. (2000). “Glass fiber reinforced plastics—Properties.” Comprehensive composite materials, Vol. 2, A. Kelly and C. Zweben, eds., Elsevier, Amsterdam, The Netherlands, 151–197.
Srinivas, S., and Chryssanthopoulos, M. K. (2007). “Spatial property characterisation of GFRP panels.” CREDO Project Rep. No. 2, Univ. of Surrey, Surrey, U.K.
Sriramula, S., Devdas, M., and Meher Prasad, A. (2006). “Multivariate simulation and multimodal dependence modeling of vehicle axle weights with copulas.” J. Transp. Eng., 132(12), 945–955.
Starr, T. (1998). “Get the strength of GRP around you.” J. Reinf. Plast. Compos., 42(6), 42–46.
Verpoest, I. (2000). “Composite preforming techniques.” Comprehensive composite materials, Vol. 2, A. Kelly and C. Zweben, eds., Elsevier, Amsterdam, The Netherlands, 623–669.
Zureick, A., and Scott, D. (1997). “Short-term behavior and design of fiber-reinforced polymeric slender members under axial compression.” J. Compos. Constr., 1(4), 140–149.
Zureick, A. H., Bennett, R. M., and Ellingwood, B. R. (2006). “Statistical characterization of fiber-reinforced polymer composite material properties for structural design.” J. Struct. Eng., 132(8), 1320–1327.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jan 25, 2008
Accepted: Nov 14, 2008
Published online: Apr 1, 2009
Published in print: Apr 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.