IC Debonding of FRP NSM and EB Retrofitted Concrete: Plate and Cover Interaction Tests
Publication: Journal of Composites for Construction
Volume 12, Issue 2
Abstract
The use of fiber-reinforced polymer (FRP) externally bonded (EB) plates is widely accepted as an efficient and unobtrusive retrofitting technique. FRP near-surface mounted plates are now also gradually gaining acceptance due to their substantial increase in debonding strains over EB plates. However tests have shown that the intermediate crack (IC) debonding resistances of FRP plates can be reduced by their interaction with adjacent parallel plates and with parallel free surfaces, that is the cover; this is often reflected in design rules where the IC debonding resistance of individual plates depends on the width of the plate as a proportion of the width of the concrete specimen and on the cover. In this paper, 22 new pull tests are reported that study the IC debonding interaction with adjacent plates and cover. The results are encouraging as they show that there is little reduction in the IC debonding resistance until the lateral cover or gap between plates is relatively small.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by an Australian Research Council Discovery grant. The first writer also thanks the University Putra Malaysia, for the financial support received.
References
Blaschko, M. (2003). “Bond behaviour of CFRP strips glued into slits.” Proc., FRPRCS-6, K. H. Tan, ed., World Scientific, Singapore, 205–214.
Liu, I. S. T., Oehlers, D. J., and Seracino, R. (2006). “Tests on the ductility of reinforced concrete beams retrofitted with FRP and steel near surface mounted plates.” J. Compos. Constr., 10(2), 106–114.
Oehlers, D. J., and Bradford, M. A. (1999). Elementary behaviour of composite steel and concrete structural members, Butterworth Heinemann, Oxford, U.K.
Raizal Saifulnaz, M. R. (2007). “Shear capacity of fibre reinforced polymer strengthened reinforced concrete beams.” Ph.D. thesis, Univ. of Adelaide, School of Civil and Environmental Engineering, Adelaide, Australia.
Seracino, R., Raizal Saifulnaz, M. R., and Oehlers, D. J. (2007). “Generic debonding resistance of EB and NSM plate-to-concrete joints.” J. Compos. Constr., 11(1), 62–70.
Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2002). FRP strengthened RC structures, Wiley, Chichester, U.K.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Sep 6, 2006
Accepted: Dec 18, 2006
Published online: Apr 1, 2008
Published in print: Apr 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.